T01KO [CPI]
175 W Outdoor TWT Power Amplifier; 175W的户外行波管功率放大器
| 型号： | T01KO |
| 厂家： | 
COMMUNICATIONS & POWER INDUSTRIES, INC. |
| 描述： | 175 W Outdoor TWT Power Amplifier |
| 文件： | 总2页 (文件大小：161K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
175 W Outdoor TWT Power Amplifier
for Satellite Communications
Ka-Band
The T01KO Series
175 Watt Ka-Band
TWT Power
Amplifiers—
Environmentally
sealed compact
design for outdoor
operation
Plays in the Rain
Global Applications
Rugged, compact and lightweight amplifier
designed for outdoor use.
Meets International Safety Standard
EN-60215, Electromagnetic Compatibility
89/336/EEC and Harmonic Standard
EN-61000-3-2 to satisfy worldwide
requirements.
Efficient and Cost Effective
Mounting at the antenna improves
performance through minimized cable losses
and saves cost in system design. Employs
a high efficiency helix traveling wave tube,
reducing operating costs.
Worldwide Support
Backed by over three decades of satellite
communications experience, and CPI’s
worldwide 24-hour customer support
network that includes sixteen regional factory
service centers.
Simple to Operate
User-friendly microprocessor-controlled logic
with integrated RS422/485 computer interface.
Digital metering is standard.
Easy to Maintain
Modular design and built-in fault diagnostic
capability via remote monitor and control.
811 Hansen Way
P.O. Box 51625, Palo Alto, CA 94303
tel: +1 (650) 846-3803
fax: +1 (650) 424-1744
e-mail: satcommarketing@cpii.com
www.cpii.com/satcom
Ka-Band
SPECIFICATIONS
175 W Ka-band Outdoor LPA
Electrical
Model Number
Frequency
T01KO
User-specified frequency range within the 27.5 to 31.0 GHz band, as limited by bandwidth specification1
TWT
175 W (52.4 dBm)
Flange
145 W (51.6 dBm)
Bandwidth
1000 to 2500 MHz, depending on desired frequency range1
Gain
O P T I O N S :
at rated power
at small signal
RF Level Adjust Range
Attenuator Step Size
Small Signal Gain Slope
Small Signal Gain Variation
70 dB min.
• 1 RU Remote
Control Panel
75 dB min. (70 dB min. with linearizer option)
0 to 25 dB
0.1 dB
• Integral 1:1
Switch Control
and Drive
0.025 dBꢀMHz maꢁ.
1.0 dB pk-pk (across any 40 MHz segment within the passband); 2.5 dB pk-pk (across any 1000 MHz)
Gain Stability (at constant
drive and temperature)
0.25 dBꢀ24 hours maꢁ. (after 30 minute warm-up)
1.0 dB over temperature range -5ꢂ˚ to ꢃ60ꢂ˚
• Redundant
and Power
Combined
VSWR
Subsystems
Input
1.3:1
Output
1.3:1
• Integral
Load
1.5:1 maꢁ.; no degradation, infinite VSWR without damage
12 dB below IESS 308 continuous mask
Linearized Solid
State IPA
Phase Noise
AM/PM Conversion
Noise and Spurious
(at rated gain)
Intermodulation
Group Delay
Linear
2.5ꢂ ꢀdB maꢁ. for a single carrier up to 6 dB OBO (1.0ꢂ ꢀdB maꢁ. up to 3 dB OBO with linearizer)
<-150 dBWꢀ4 kHz, below 21.2 GHz
• Block
Upconverter
(refer to T01KO
B-Series TWTA)
<-70 dBWꢀ4 kHz, 27.0 - 31.0 GHz (<-65 dBWꢀ4 kHz with linearizer)
-24 dBc maꢁ @ 7 dB backoff from rated power (@ 4 dB backoff from rated power with linearizer)
(in any 40 MHz band)
0.01 nsecꢀMHz maꢁ.
Parabolic
0.001 nsecꢀMHz sq. maꢁ.
Ripple
0.5 nsec pk-pk maꢁ.
Primary Power
Power Consumption
Power Factor
100 - 240 VA˚ 10ꢄ, 47-63 Hz
750 VA typ, at saturated RF output power; 800 VA maꢁ.
0.95 min.
Environmental (operating)
Ambient Temperature
Relative Humidity
-40ꢂ to ꢃ60ꢂ ˚ with eꢁtra margin for solar loading
100ꢄ condensing
Altitude
10,000 ft with standard adiabatic derating of 2ꢂ ˚ꢀ1000 ft
20 g peak, 11 msec, 1ꢀ2 sin; 2.1 grms, 5 to 500 Hz
Shock and Vibration
Mechanical
Cooling
Forced air with integral blower
WR-28F (WR-34F optional)
WR-34G (WR-28G optional)
2.9 mm SMA Female
RF Input Connection
RF Output Connection
RF Output Monitor
Dimensions (WꢁHꢁD)
Weight
10.25 ꢁ 9.5 ꢁ 20 inches (261 ꢁ 242 ꢁ 508 mm)
52 lbs (23.6 kg) maꢁ.
Heat and Acoustic
Heat Dissipation
Acoustic
600 W typ.
65 dBA typ.
Note 1: Please consult CPI representative to confirm that desired bandwidth is available over desired frequency range.
Mounting hardware is provided with each amplifier.
Certificate Number: 30515
For more detailed information, please refer to the corresponding CPI Technical Description.
Note: Specifications may change without notice as a result of additional data or product refinement.
Please contact CPI before using this information for system design.
MKT 99, ISSUE 12
12/08
PDF
相关型号：
©2020 ICPDF网 联系我们和版权申明