BGSA142M2N12 [INFINEON]
天线相关器件;
| 型号： | BGSA142M2N12 |
| 厂家： | 
Infineon |
| 描述： | 天线相关器件 |
| 文件： | 总2页 (文件大小：376K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SP001666150
BGSA142M2N12
High RF Voltage SP4T Switch
Features
Designed for high linearity and high RF voltage tuning applications
Multiple selectable switch configurations:
Each throw directly and independently controlled
Low RON resistance of 1.75 Ω at each port in ON state
Low COFF capacitance of 110 fF at each port in OFF state
High RF operating voltage of 72 V at RFx and 67 V at RFC in OFF state
Low harmonic generation
MIPI 2.0 RFFE control interface
4 USID addresses enabled by external condition at USID_sel pin
and SCLK/SDATA swap mode
Supply voltage range: 1.65 to 3.6 V
No RF parameter change within supply voltage range
Small form factor 1.5 mm x 1.5 mm (MSL1, 260° C per JEDEC J-STD-020)
RoHS and WEEE compliant package
Description
The BGSA142M2N12 is a versatile direct mapping Single-Pole Quad Throw (SP4T) RF switch optimized for low
COFF as well as low RON enabling applications up to 6.0 GHz. Including a MIPI RFFE digital control interface, all the
throw states can be programmed in the same RFFE command enabling SP4T, SP3T, SPDT along with SPST
topology for a better flexibility in RF Front-End designs.
The BGSA142M2N12 includes 4 low RON and high RF voltage ports making it ideal for antenna tuning and
tunable matching network applications. RFC as well as RF1, RF2, RF3 and RF4 can handle high RF Voltage
(bidirectional RF Voltage handling). Due to its very high RF voltage ruggedness on all RF ports, it is suited for
switching any reactive devices such as inductors and capacitors without significant losses.
Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level,
resulting in linear performance at all signal levels and external DC blocking capacitors at the RF ports are only
required if DC voltage is applied externally.
Datasheet Summary
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1 of 2
Revision 1.1
2020-02-17
High RF Voltage SP4T Switch
Block diagram and ordering information
Figure 1
BGSA142M2N12 Block diagram
Table 1
Ordering Information
Package
Type
Marking
BGSA142M2N12
TSNP-12-1
4A
Trademarks
All referenced product or service names and trademarks are the property of their respective owners.
IMPORTANT NOTICE
The information given in this document shall in no For further information on the product, technology,
Edition 2019-09-16
event be regarded as a guarantee of conditions or delivery terms and conditions and prices please
Published by
characteristics (“Beschaffenheitsgarantie”) .
contact your nearest Infineon Technologies office
(www.infineon.com).
Infineon Technologies AG
81726 München, Germany
With respect to any examples, hints or any typical
values stated herein and/or any information
regarding the application of the product, Infineon
Technologies hereby disclaims any and all
warranties and liabilities of any kind, including
without limitation warranties of non-infringement
of intellectual property rights of any third party.
WARNINGS
Due to technical requirements products may
contain dangerous substances. For information on
the types in question please contact your nearest
Infineon Technologies office.
© 2020 Infineon Technologies AG.
All Rights Reserved.
Do you have a question about this
document?
In addition, any information given in this document
is subject to customer’s compliance with its
obligations stated in this document and any
applicable legal requirements, norms and
standards concerning customer’s products and any
use of the product of Infineon Technologies in
customer’s applications.
Except as otherwise explicitly approved by Infineon
Technologies in
a written document signed by
authorized
representatives
of
Infineon
Email: erratum@infineon.com
Technologies, Infineon Technologies’ products may
not be used in any applications where a failure of
the product or any consequences of the use thereof
can reasonably be expected to result in personal
injury.
Document reference
ifx1
The data contained in this document is exclusively
intended for technically trained staff. It is the
responsibility of customer’s technical departments
to evaluate the suitability of the product for the
intended application and the completeness of the
product information given in this document with
respect to such application.
相关型号：
©2020 ICPDF网 联系我们和版权申明