APTL3216ZGCK-01 [KINGBRIGHT]
Single Color LED,;
| 型号： | APTL3216ZGCK-01 |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, 光电 |
| 文件： | 总4页 (文件大小：285K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
APTL3216ZGCK-01
3.2 x 1.6 mm SMD Chip LED Lamp
DESCRIPTIONS
PACKAGE DIMENSIONS
ꢀ
ꢀ
ꢀ
ꢀ
The Green source color devices are made with
InGaN on Sapphire Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3.2 mm x 1.6 mm SMD LED, 1.1 mm thickness
Low power consumption
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ꢀ0.1
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Iv (mcd) @ 20mA [2]
Viewing Angle [1]
Emitting Color
(Material)
Part Number
Lens Type
Min.
Typ.
2θ1/2
■
Green (InGaN)
APTL3216ZGCK-01
Water Clear
700
1000
80°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Page 1 / 4
© 2019 Kingbright. All Rights Reserved. Spec No: DSAP0906 / 1203015281 Rev No: V.2B Date: 04/20/2019
APTL3216ZGCK-01
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Value
Parameter
Symbol
Emitting Color
Unit
Typ.
Max.
Wavelength at Peak Emission IF = 20mA
Dominant Wavelength IF = 20mA
λpeak
Green
Green
Green
515
-
nm
nm
nm
[1]
λdom
525
35
-
-
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA
Δλ
Capacitance
C
Green
Green
Green
45
-
pF
V
[2]
Forward Voltage IF = 20mA
Reverse Current (VR = 5V)
VF
3.3
4.1
IR
-
50
μA
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Unit
Power Dissipation
Reverse Voltage
PD
VR
Tj
102.5
5
mW
V
Junction Temperature
115
°C
°C
°C
mA
mA
V
Operating Temperature
Storage Temperature
Top
Tstg
IF
-40 to +85
-40 to +85
25
DC Forward Current
[1]
Peak Forward Current
IFM
150
Electrostatic Discharge Threshold (HBM)
450
-
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
Page 2 / 4
© 2019 Kingbright. All Rights Reserved. Spec No: DSAP0906 / 1203015281 Rev No: V.2B Date: 04/20/2019
APTL3216ZGCK-01
TECHNICAL DATA
SPATIAL DISTRIBUTION
RELATIVE INTENSITY vs. WAVELENGTH
Green
100%
0°
-15°
15°
Ta = 25 °C
-30°
T
a = 25 °C
30°
80%
60%
40%
20%
0%
45°
-45°
-60°
60°
75°
-75°
350
400
450
500
550
600
650
700
750
800
90°
1.0
-90°
1.0
Wavelength (nm)
0.5
0.0
0.5
GREEN
Forward Current Derating Curve
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Luminous Intensity vs.
Ambient Temperature
50
40
30
20
10
0
2.5
2.0
1.5
1.0
0.5
0.0
50
40
30
20
10
0
2.5
2.0
1.5
1.0
0.5
0.0
Ta = 25 °C
Ta = 25 °C
2.0
2.5
3.0
3.5
4.0
4.5
0
10
20
30
40
50
-40 -20
0
20 40 60 80 100
-40 -20
0
20 40 60 80 100
Forward voltage (V)
Forward current (mA)
Ambient temperature (°C)
Ambient temperature (°C)
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
TAPE SPECIFICATIONS (units : mm1
REEL DIMENSION (units : mm1
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.
Page 3 / 4
© 2019 Kingbright. All Rights Reserved. Spec No: DSAP0906 / 1203015281 Rev No: V.2B Date: 04/20/2019
APTL3216ZGCK-01
PACKING & LABEL SPECIFICATIONS
PRECAUTIONARY NOTES
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to
the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If
customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening
liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes
Page 4 / 4
© 2019 Kingbright. All Rights Reserved. Spec No: DSAP0906 / 1203015281 Rev No: V.2B Date: 04/20/2019
相关型号：
©2020 ICPDF网 联系我们和版权申明