APE1F-5M-10-Z [NIDEC]
Subminiature Pushbutton Switches;型号: | APE1F-5M-10-Z |
厂家: | NIDEC COMPONENTS |
描述: | Subminiature Pushbutton Switches 开关 光电二极管 |
文件: | 总4页 (文件大小:407K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Washable
APE
RoHS Compliant
Subminiature Pushbutton Switches
UL
■ ꢀꢁꢂꢃꢄ ꢆꢃꢇꢈꢄꢉꢊꢋꢆ
■Features
1. Twin-contact clip mechanism for high reliability.
0.4VA AC、DC
Rating
Max:50mA 60VAC/DC Min:1μA 20mVAC/DC
2. Process sealed structure
3. Gold-plated contacts.
4. Terminal pin pitch: 2.54 mm.
5. UL recognized
Initial contact resistance 50mΩmax.ꢀ
Dielectric strength 250VAC 1 minute
(1.5mA 200μVAC)
Initial Insulation resistance 500MΩ min.
(500VDC)
10,000 operations at maximum rating.
30,000 operations at 0.4VA
Electrical life
Operating force
0.78~2.94N
-20~+85℃
-40~+85℃
Operating
temperature range
Storage
temperature range
■ Part Numbering
A PE 2 F
2 M
10
Z
-
-
-
Series code
Actuator shape Number of poles
Switching function
Terminal style
Actuator shape
Clip contact mechanism
Switching function
Number of poles
1 pole
Actuator shape
Standard
Fig.
1
Fig.
2
Terminal style
PC Straight
Code
Code
Type
Code
Push type
PE
ON -(ON)
M
F
Right angle
2 poles
2
5
(0.2 inch pitch)
Right angle
6
(0.3 inch pitch)
■Optional Accessories ……………… Page 253.
(ON):Momentary.
APE-M(Standard type)
SPDT
Switching
function
Part No.
APE1F-2M-10-Z
ON
(ON)
2-1
Connecting terminals
2-3
Terminal numbers are not shown on the switch.
PC Straight
DPDT
Switching
function
Part No.
APE2F-2M-10-Z
ON
2-3
5-6
(ON)
2-1
Connecting terminals
5-4
Terminal numbers are not shown on the switch.
PC Straight
SPDT
Switching
function
Part No.
★APE1F-5M-10-Z
ON
(ON)
2-1
Connecting terminals
2-3
0.2R/A
DPDT
Terminal numbers are not shown on the switch.
Switching
function
Part No.
★APE2F-5M-10-Z
ON
2-3
5-6
(ON)
2-1
Connecting terminals
5-4
0.2R/A
SPDT
Terminal numbers are not shown on the switch.
Switching
function
Part No.
APE1F-6M-10-Z
ON
(ON)
2-1
Connecting terminals
2-3
0.3R/A
DPDT
Terminal numbers are not shown on the switch.
Switching
function
Part No.
☆APE2F-6M-10-Z
ON
2-3
5-6
(ON)
2-1
Connecting terminals
5-4
0.3R/A
Terminal numbers are not shown on the switch.
(ON):Momentary.
☆:Semi-standard products.
★:Made to order products.
APE
■Right angle terminals
●The space between the terminal rows are available in
two dimensions: 0.2 inches (5.08 mm) and 0.3 inches
(7.62 mm).
1 pole
ꢀ[Example] ꢀ0.2-inch pitch : APE1F-5M-10-Z
0.3-inch pitch : APE1F-6M-10-Z
2 poles
Button Shape
■
Bracket Installation Procedure
■
Standard(M)
■Mounting of Switch
●Use PC boards with hole diameter of 1mm.
●Do not bend the terminal pins before mounting the switch on
the PC board.
Color Cap Mounting
■
●After mounting the switch, do not place the device in such a
way that the device weight will be applied on to the actuator of
the switch.
●Do not apply load exceeding 12.7 N to the actuator. If load
exceeding 12.7 N is expected to be applied to the actuator,
please use a Bracket (optional accessory sold separately).
Maximum load will be 29.4 N when a Bracket is used.
●Use Bracket 140000640314 or 140000640318 for side-by-
side mounting.
Refer to P.253.
●To increase mounting strength, use Bracket 140000640315.
●PC Hole Layouts will change depending on the Bracket.
Please refer to P.249.
:Optional Accessories.
APE
■ꢆꢀꢉꢌꢍꢂꢎꢄꢊꢏꢆꢀꢁꢂꢃꢄꢅꢃꢇꢈꢄꢉꢊꢋ
■Flux Cleaning
⑴Manual Soldering
⑴Solvent :Fluorine or Alcohol type.
Device Soldering iron
:
⑵Cleaning after soldering should be done after the terminal
temperature falls to 90℃ or below, or after leaving the
switch for five minutes or longer at room temperature.
⑶Do not use ultrasonic cleaning.
380°C, Max.; 3 seconds, Max.
⑵Auto Soldering
Device Jet wave type or dip type
:
275°C, Max.; 6 seconds, Max.
・Pre-heating should be done at temperatures ranging from 80°
C to 120°C and within 120 seconds.
■PC Hole Layouts(AP・APE)
ꢀPC Straight
Mounting
When optional Bracket is used.
140000640314 or 140000640316 140000640315 or 140000640317
Without Bracket
Type
140000640318
AP-M
AP-S
1 pole
AP-H
APE
AP-M
AP-S
AP-H
2 poles
2 poles
APE
■Right-angle Terminal
■ꢐꢇꢃꢑꢇꢏꢄꢊꢏꢆꢀꢁꢂꢃꢄꢅꢃꢇꢈꢄꢉꢊꢆ
ꢀꢀ
Terminal
0.2-inch pitch
0.3-inch pitch
Type
1 pole
AP-M
AP-S
APE
ꢄ
ꢅ
ꢀ
ꢃ
ꢂ
ꢀ
2 poles
相关型号:
APE2712EC
Single Color LED, High Efficiency Red, Water Clear, 2mm, 2.70 MM X 1.20 MM, 1.30 MM HEIGHT, SMT 2 PIN
KINGBRIGHT
APE2712MBC
Single Color LED, Blue, Water Clear, 2mm, 2.70 X 1.20 MM, 1.30 MM HEIGHT, SMD, 2 PIN
KINGBRIGHT
APE2712MGC
Single Color LED, Mega Green, Water Clear, 2mm, 2.70 MM X 1.20 MM, 1.30 MM HEIGHT, SMT 2 PIN
KINGBRIGHT
APE2712SGC
Single Color LED, Super Bright Green, Water Clear, 2mm, 2.70 X 1.20 MM, 1.30 MM HEIGHT, SMD, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明