LV5219LG-TLM-E [ONSEMI]
LED Driver for Cell Phones, LFLGA49 5x5 / FLGA49J, 2000-REEL;型号: | LV5219LG-TLM-E |
厂家: | ONSEMI |
描述: | LED Driver for Cell Phones, LFLGA49 5x5 / FLGA49J, 2000-REEL 驱动 信息通信管理 接口集成电路 |
文件: | 总65页 (文件大小:413K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ordering number : ENA1083
LV5219LG
Bi-CMOS IC
LED driver for cell phone
http://onsemi.com
Overview
The LV5219LG is an LED driver IC for cellular phones. It incorporates 17 LED drivers (main, sub, tricolor × 2, and
flash) and a switching regulator circuit and supports the step-up through mode. Each LED current level can be
adjusted over the I2C serial bus. The LED driver IC also has functions to synchronize a ringing tone with a tricolor
LED and to automatically control the brightness of white LEDs by brightness sensor.
Functions
• PWM switching regulator control circuit
(Triangular wave oscillator, reference voltage, PWM comparator, driver, DTC, and short-circuit protection
circuit incorporated)
(Timer-latch type output cut-off circuit in case of overload)
• LED driver
Main LCD backlight LED driver × 6 with automatic brightness adjustment
LED current 5-bit changeover 0.0mA to 18.6mA
Fade in/out function
External brightness control function
Dim mode 3-bit changeover 0mA to 1.4mA
MLED4, MLED5, and MLED6 can be controlled independently
Sub LCD backlight LED driver × 2
LED current 5-bit changeover 0.0mA to 18.6mA
Fade in/out function
Independently controlled SLED2
Tricolor LED driver × 2
LED current 5-bit changeover 0.0mA to 18.6mA
Gradation function
Ringing tone synchronization function (Forced to operate at SCTL : H)
Flash LED driver × 3
LED current 5-bit changeover 0.0mA to 18.6mA
Independent control
Semiconductor Components Industries, LLC, 2013
August, 2013
10509 MS PC 20071129-S00004 No.A1083-1/65
LV5219LG
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
V
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
V
max
6
1.2
CC
Pd max
Topr
Mounted on a board *
W
-30 to +85
-40 to +125
°C
°C
Tstg
∗ Designated board : 40mm×50mm×0.8mm, glass epoxy 4-layter board (2S2P)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Recommended Operating Conditions at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
V
Supply voltage 1
VBAT
2.7 to 4.5
1.65 to 3
1.65 to 3
Supply voltage 2
Supply voltage 3
V
V
DD
V
2
V
DD
* Use the IC so that supply voltages 1, 2, and 3 have a magnitude relationship expressed as VBAT > V
* Powers must be turned on so that VBAT brings up first.
and VBAT > V 2.
DD
DD
* Powers must be turned off so that VBAT brings down last.
Electrical Characteristics Ta = 25°C, VBAT = 3.7V, V
= V 2 = 2.6V
DD
DD
Ratings
typ
Parameter
Symbol
Conditions
Unit
min
max
5
VBAT system
I
I
I
I
1
2
3
4
RESET : L (standby mode)
RESET : H (sleep mode)
0
μA
μA
CC
CC
CC
CC
(PVBAT, SVBAT)
0.3
1.5
1.5
5
consumption current
When the switching regulator is operated.
2.5
2.5
mA
mA
Switching regulator operation
LED : ON current set to 0
RESET : L (standby mode)
V
system (V
)
I
I
I
I
5
6
7
8
0
0
0
0
5
5
5
5
μA
μA
μA
μA
DD
consumption current
DD
CC
CC
CC
CC
RESET : H (sleep mode)
When the switching regulator is operated.
Switching regulator operation
LED : ON current set to 0
RESET : L (standby mode)
V
system (V 2)
DD
consumption current
I
I
I
I
9
0
0
0
0
5
5
5
5
μA
μA
μA
μA
DD
CC
CC
CC
CC
10
11
12
RESET : H (sleep mode)
When the switching regulator is operated.
Switching regulator operation
LED : ON current set to 0
Switching regulator block
Output voltage 1
V
V
1
I
= 30mA, when output set to 5V
O
4.8
0.2
5.0
0.3
5.2
0.4
V
V
O
LED pin voltage
2
LED pin voltage Lowest voltage of feed back mode
LED pin voltages MLED1, 2, 3, 4, 5, and 6 (except
when MLED4, MLED5, and 6 are controlled
independently)
O
Clock frequency
f
External capacitance value connected to CT pin is
27pF
0.8
50
1
1.2
MHz
V
OSC
Changeover voltage
VD1
Voltage for switching from through mode to LED pin
fixed voltage mode when the LED pin voltage main
current value is set to 18.6mA
0.2
Changeover monitoring time
TVD1
Time interval predetermined to detect error for the
LED pin voltage when operation is switched over to
stepping up with the detection of LED pin voltage.
120
μs
Soft start time
TST
RTH
1000
μs
Through SW ON resistance
Load = 100mA
1
Ω
Continued on next page.
No.A1083-2/65
LV5219LG
Continued from preceding page.
Ratings
typ
Parameter
Symbol
Conditions
Unit
min
max
LED driver block
Minimum output current
Maximum output current
Nonlinearity error
I
I
1
Serial data = #00
0.2
0.6
1.7
mA
mA
LSB
LSB
V
MIN
1
Serial data = #1E
17.4
-2
18.6
19.8
2
MAX
LE
*1
*2
Differential linearity error
DLE
VS1
-2
2
LED pin voltage
RGB1, RGB2, FLED1, 2 SLED1, 2
MAX current set
0.35
Saturation characteristic 1
LED pin voltage
VS2
M1
M2
M3
M4
M5
MLED1, 2, 3, 4, 5, 6 set to MAX current
0.2
5
V
Saturation characteristic 2
LED current pairing
characteristic 1
MLED1, 2, 3, 4, 5, 6 MAX current set
SLED1, 2 MAX current set
%
%
%
%
%
LED current pairing
characteristic 2
5
LED current pairing
characteristic 3
R1LED, R2LED MAX current set
G1LED, G2LED MAX current set
B1LED, B2LED MAX current set
5
LED current pairing
characteristic 4
5
LED current pairing
characteristic 5
5
Leakage current
I
LED driver : OFF, V = 5V
O
1
μA
Ω
L
KLED pin on resistance
External CTL current 1
RKE
KLED1, KLED2 50 mA drive mode
5
0
VEM1
MLED1, 2, 3 current values, MICTL pin voltage =
-0.05
69.6
42
+0.05
79.6
52
mA
V
2, V 2 = 2.6V, RT2 = 120kΩ, V 2 = 1.8V,
DD DD DD
RT2 = 82kΩ, difference current when serial MISW :
OFF
External CTL current 2
External CTL current 3
External CTL current 4
External CTL current 5
SCTL response time
VEM2
VEM3
VEM4
VEM5
TSCTL
MLED1, 2, 3 current values, MICTL pin voltage =
74.6
47
%
%
V
2×3/4, V 2 = 2.6V, RT2 = 120kΩ, V 2 =
DD DD DD
1.8V, RT2 = 82kΩ, ratio to the current value when
serial MISW : OFF
MLED1, 2, 3 current values, MICTL pin voltage =
V
2×1/2, V 2 = 2.6V, RT2 = 120kΩ, V 2 =
DD DD DD
1.8V, RT2 = 82kΩ, ratio to the current value when
serial MISW : OFF
MLED1, 2, 3 current values, MICTL pin voltage =
15.3
20.3
25.3
0.5
%
V
2×1/4, V 2 = 2.6V, RT2 = 120kΩ, V 2 =
DD DD DD
1.8V, RT2 = 82kΩ, ratio to the current value when
serial MISW : OFF
MLED1, 2, 3 current values, MICTL pin voltage = 0,
0
mA
μs
= V 2 = 2.6V, RT2 = 120kΩ, V 2 = 1.8V, RT2 =
DD DD
82kΩ, operation to turn off LED by applying 0V to the
MICTL pin is prohibited.
RGB1 and 2LED current delay time when switching
SCTL on/off
10
*1 Nonlinearity error : Error from the ideal current value.
*2 Differential linearity error : Error from the ideal increment when increase by 1 bit is made.
Continued on next page.
No.A1083-3/65
LV5219LG
Continued from preceding page.
Ratings
typ
Parameter
Symbol
Conditions
Unit
min
max
Brightness sensor information input circuit
PTD pin threshold voltage 1
PTD pin threshold voltage 2
PTD pin threshold voltage 3
PTD pin threshold voltage 4
PTD pin threshold voltage 5
PTD pin threshold voltage 6
PTD pin threshold voltage 7
PTD pin threshold voltage 8
PTD pin threshold voltage 9
VP1
VP2
VP3
VP4
VP5
VP6
VP7
VP8
VP9
Brightness 1-2 switching PTD pin voltage
Brightness 2-3 switching PTD pin voltage
Brightness 3-4 switching PTD pin voltage
Brightness 4-5 switching PTD pin voltage
Brightness 5-6 switching PTD pin voltage
Brightness 6-7 switching PTD pin voltage
Brightness 7-8 switching PTD pin voltage
Brightness 8-9 switching PTD pin voltage
Brightness 9-10 switching PTD pin voltage
Brightness 10-11 switching PTD pin voltage
Brightness 11-12 switching PTD pin voltage
Brightness 12-13 switching PTD pin voltage
Brightness 13-14 switching PTD pin voltage
Brightness 14-15 switching PTD pin voltage
Brightness 15-16 switching PTD pin voltage
0.197
0.247
0.291
0.333
0.375
0.419
0.461
0.503
0.547
0.589
0.631
0.672
0.717
0.759
0.801
0.843
0.297
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
0.241
0.283
0.325
0.369
0.411
0.453
0.492
0.530
0.563
0.605
0.645
0.683
0.721
0.752
0.341
0.838
0.425
0.469
0.511
0.553
0.602
0.648
0.694
0.739
0.789
0.835
0.881
0.920
PTD pin threshold voltage 10 VP10
PTD pin threshold voltage 11 VP11
PTD pin threshold voltage 12 VP12
PTD pin threshold voltage 13 VP13
PTD pin threshold voltage 14 VP14
PTD pin threshold voltage 15 VP15
Control circuit block
High level 1
V
V
V
V
V
V
V
V
V
H1
L1
H2
L2
1
Input high level serial
0.8V
V
V
V
V
V
V
V
V
V
IN
IN
IN
IN
DD
0
Low level 1
Input low level serial
0.2V
DD
0.3
High level 2
Input high level RESET, SCTL
Input low level RESET, SCTL
1.5
0
Low level 2
High output level 1
Low output level 1
High output level 2
Low output level 2
High output level 3
Output high level PTEN, I = 1mA
L
V
V
V
-0.3
0
HO
DD
DD
DD
1
Output low level PTEN, I = -1mA
L
0.3
0.3
LO
2
Output high level INT, I = 1mA
L
-0.3
0
HO
2
Output low level INT, I = -1mA
L
LO
3
Output high level GPO0, GPO1, GPO2, I = 1mA
L
-0.3
HO
Output setting: when set to buffer output setting
Low output level 3
V
3
Output low level GPO0, GPO1, GPO2, I = -1mA
L
Output setting: when set to buffer output setting
0
0.3
1
V
LO
OPEN output
I
I
I
1
Current flows in or or out when V
DD
is applied to
-1
0
0
0
μA
OP
leakage current 1
output. When GPO0, GPO1, GPO2 output is set to
OPEN output.
OPEN output
2
Current flows in or out when 0V is applied to output.
When GPO0, GPO1, GPO2 output is set to OPEN
output.
-1
-1
1
1
μA
μA
OP
leakage current 2
High input current 1
1
Current flows in or out when VBAT voltage is applied
to PTD pin
HIN
Low input current 1
High input current 2
I
I
1
Current flows in or out when 0V is applied to PTD pin
-1
-3
0
0
1
3
μA
μA
LIN
2
3
4
Current flows in or out when V is applied to
DD
HIN
MICTL pin
Low input current 2
High input current 3
Low input current 3
High input current 4
Low input current 4
I
I
I
I
I
2
Current flows in or out when 0V is applied to MICTL
5
-1
6.5
0
8
1
μA
μA
μA
μA
μA
LIN
pin
Current flows in or out when VBAT voltage is applied
HIN
to RESET pin
3
Current flows in or out when 0V is applied to RESET
-1
0
1
LIN
pin
Current flows in or out when VDD is applied to SCTL
28
-1
40
0
52
1
HIN
pin
4
Current flows in or out when 0V is applied to SCTL
pin
LIN
No.A1083-4/65
LV5219LG
Package Dimensions
unit : mm (typ)
3359
Pd max -- Ta
1.4
1.2
Specified board : 50×40×0.8mm3
4-layer glass epoxy
5.0
0.45
0.55
1.0
0.8
0.6
0.4
0.2
0.48
G
F
E
D
C
B
A
0.65
0.35
0
–
–
30 20
0
20
40
60
8085
100
Ambient temperature, Ta – °C
FLGA49J(5.0X5.0)
Pin Assignment
G
F
E
D
C
B
A
LED
GND1
TEST3 MLED3
MLED2 SGND MLED_F TEST
1
2
3
4
5
6
7
SLED2 MLED4 MLED5 MLED6 MLED1 MICTL
CT
SLED1 RLED1 RT2 GPO2 GPO1 SCL SVBAT
LED
RLED2 SDA
PTD
SCTL
INT
IN
GND2
V
GLED1 GLED2 RESET
DD PTEN GPO0 PVBAT
BLED2 BLED1 FLED3 KLED1
LED
RT
V
2 SWOUT
DD
TEST1 FLED2 FLED1
GND3
KLED2 PGND TEST2
Top View
No.A1083-5/65
LV5219LG
Block Diagram
PTD
RT
EN
VBAT
GND
VBAT
Automatic
brightness
control
When V 2 = 1.8V
DD
82kΩ
RT2
MICTL
MLED1
MLED2
MLED3
MLED4
MLED5
MLED6
SLED1
SLED2
PTEN
V
2
DD
0.47μF
IN
PVBAT
SVBAT
47μH
SCH2817
VOUT
SWOUT
PGND
SGND
4.7μF
RLED1
GLED1
BLED1
V
DD
RESET
TEST
SCL
RLED2
GLED2
BLED2
SDA
INT
FLED1
FLED2
FLED3
GPO0
GPO1
GPO2
MLED_F
0.22μF
SCTL
LEDGND1
LEDGND2
LEDGND3
V
2
DD
KLED1
KLED2
TEST1
TEST2
TEST3
No.A1083-6/65
LV5219LG
Pin Functions
Pin No.
Pin name
Pin Description
Equivalent Circuit
A3
A1
TEST
Test signal input pin.
Be sure to connect the pin to GND.
40kΩ
A1
10kΩ
40kΩ
A2
CT
Oscillator frequency setting capacitance connection pin.
Triangular wave output is generated by connecting an external
capacitor across this pin and GND. The clock frequency of the switching
regulator and the LED on/off fade time can be adjusted by changing the
value of the external capacitor.
A3
A2
Internal reference
40kΩ
A3
A4
SVBAT
IN
Power pin for analog circuit.
DC/DC feedback voltage input pin.
Feedback is applied so that the input voltage becomes equal to the set
voltage in the output voltage fixed mode. Overvoltage limiter is activated
when the input voltage rises about 0.6V higher than the fixed mode set
voltage. When the input voltage falls, the switching regulator is stopped
in about 10ms. This condition is released by resetting the IC or setting
the serial RGSW to OFF.
A3
A5
A4
A5
A6
PVBAT
Power pin for DC/DC pulse output driver.
SWOUT
DC/DC PWM pulse output pin.
A5
The on resistance of both output transistors PCH and NCH are about
10Ω.
A6
B1
MLED_F
MLED filter capacitor connection pin.
A3
50kΩ
1kΩ
B1
B2
MICTL
MLED external brightness control pin.
A3
The main LED normal current value can be varied by applying a DC
B6
voltage to this pin. The set current value is obtained when V
2
DD
voltage is applied. The main LED normal current decreases as the
voltage is lowered. The level of current change can be varied by the
value of external resistor connected to the RT2 pin.
200kΩ
B2
Continued on next page.
No.A1083-7/65
LV5219LG
Continued from preceding page.
Pin No.
B3
Pin name
SCL
Pin Description
Equivalent Circuit
Serial clock signal input pin.
A3
B3
D5
10kΩ
B4
INT
Interrupt signal output pin.
A3
B4
D5
B6
B7
C1
V
2
Reference power for MLED external sync circuit.
DC/DC pulse output driver GND pin.
Analog circuit GND pin.
DD
PGND
SGND
B5
C3
D3
GPO0
GPO1
GPO2
General-purpose output pins.
A3
D5
B5
C3
D3
C4
C5
C6
SCTL
PTEN
RT
RBGLED external sync signal input pin.
A3
C4
When the serial R1SW, G1SW, and B1SW, G2SW, and B2SW are set
to ON, setting the application voltage H causes tricolor LED to go ON.
When the application voltage set to L, tricolor LED goes OFF. Note that
if the serial settings SCSW1 and SCSW2 are set to "ignore SCTL,"
tricolor LED goes ON regardless of the state of SCTL.
50kΩ
100kΩ
Brightness sensor ON/OF control pin.
A3
C5
Reference current setting resistor connection pin.
A3
C6
By connecting the external resistor between this pin and GND, the
reference current is generated. The pin voltage is about 0.25V. Change
of this current value enables change of the oscillation frequency and
LED driver current value.
30kΩ
Continued on next page.
No.A1083-8/65
LV5219LG
Continued from preceding page.
Pin No.
Pin name
KLED1
Pin Description
Equivalent Circuit
D6
C7
Key LED driver output pins.
D6
C7
KLED2
C2
D1
F1
F2
E2
D2
MLED1
MLED2
MLED3
MLED4
MLED5
MLED6
Main LCD backlight LED driver pin.
Feedback is applied so that the current flow through the output
transistor becomes equal to the set current value. The driver current
value can be adjusted in 0.6mA steps from about 0.6mA to 18.6mA
through serial setting. These pins are also used to switch from through
to switching regulator mode and to sense the feedback of the output
voltage to the LED pins.
F2 C2
E2 D1
D2 F1
D4
PTD
Brightness sensor output connection pin.
A3
D4
Used to determine the brightness according to the DC input voltage.
Must be connected to GND when not to be used.
20kΩ
D5
D7
E1
E3
V
Power pin for IF.
DD
LEDGND3
LEDGND1
RT2
LED driver dedicated GND pin 3
LED driver dedicated GND pin 1
Reference current setting resistor connection pin used when MLED is
controlled externally.
A3
E3
1kΩ
The resistance value of the external resistor connected to the V 2 pin
DD
can set a variable value of the main LED normal mode current that is
200kΩ
varied with the MICTL pin.
E4
SDA
Serial data signal input pin.
A3
E4
D5
10kΩ
E5
RESET
Reset signal input pin.
Reset state when low.
A3
E5
0.2μA
18kΩ
E7
F7
E6
FLED1
FLED2
FLED3
Flash LED driver pins.
E7
Feedback is applied so that the current flow through the output
transistor becomes equal to the set current value. Each driver output
current value can be adjusted independently with the 0.6 step from
about 0.8mA to 18.6mA through serial setting.
F7
E6
Continued on next page.
No.A1083-9/65
LV5219LG
Continued from preceding page.
Pin No.
Pin name
Pin Description
Equivalent Circuit
F3
F4
G5
F5
F6
G6
RLED1
RLED2
GLED1
GLED2
BLED1
BLED2
Tricolor LED driver pins.
F5 F3
F6 F4
Feedback is applied so that the current flow through the output
transistor becomes equal to the set current value. Each driver output
current value can be adkusted independently with the 0.6 step from
about 0.8mA to 18.6mA through serial setting.
G6 G5
These pins are turned ON only when the SCTL pin is set high or the
serial SCTEN and SCSW2 pins are set to ignore SCTL.
G3
G2
SLED1
SLED2
Sub-LED backlight LED driver pins.
G3
G2
Feedback is applied so that the current flow through the output
transistor becomes equal to the set current value. The driver output
current value can be adjusted independently with the 0.6 step from
about 0.8mA to 18.6mA through serial setting.
G4
LEDGND2
LED driver dedicated GND pin 2.
G7
A7
G1
TEST1
TEST2
TEST3
Test signal input pin.
A3
Be sure to connect the pin to GND.
G7
A7
G1
50kΩ
100kΩ
No.A1083-10/65
LV5219LG
Serial Bus Communication Specifications
I2C serial transfer timing conditions
twH
SCL
th1
twL
th2
tbuf
SDA
th1
ts2
ts1
ts3
Start condition
Resend start condition
Stop condition
ton
tof
Input waveform condition
Standard mode
Parameter
SCL clock frequency
Data set up time
symbol
Conditions
min
typ
max
unit
kHz
μs
ns
fscl
ts1
ts2
ts3
th1
th2
twL
twH
ton
tof
SCL clock frequency
0
100
SCL setup time relative to the fall of SDA
SDA setup time relative to the rise of SCL
SCL setup time relative to the rise of SDA
SCL data hold time relative to the rise of SDA
SDA hold time relative to the fall of SCL
SCL pulse width for the L period
4.7
250
4.0
4.0
0
μs
μs
μs
μs
μs
ns
Data hold time
Pulse width
4.7
4.0
SCL pulse width for the H period
Input waveform conditions
Bus free time
SCL and SDA (input) rise time
1000
300
SCL and SDA (input) fall time
ns
tbuf
Time between STOP and START conditions
4.7
μs
High-speed mode
Parameter
SCL clock frequency
Data setup time
Symbol
fscl
ts1
Conditions
SCL clock frequency
min
typ
max
unit
kHz
μs
ns
0
0.6
100
0.6
0.6
0
400
SCL setup time relative to the fall of SDA
SDA setup time relative to the rise of SCL
SCL setup time relative to the rise of SDA
SCL data hold time relative to the rise of SDA
SDA hold time relative to the fall of SCL
SCL pulse width for the L period
ts2
ts3
μs
μs
μs
μs
μs
ns
Data hold time
th1
th2
Pulse width
twL
twH
ton
1.3
0.6
SCL pulse width for the H period
Input waveform conditions
Bus free time
SCL and SDA (input) rise time
300
300
tof
SCL and SDA (input) fall time
ns
tbuf
Time between STOP and START conditions
1.3
μs
No.A1083-11/65
LV5219LG
I2C bus transmission method
Start and stop conditions
In the I2C bus, SDA must basically be kept in the constant state while SCL is "H" as shown below during data
transfer.
SCL
SDA
ts2
th2
When data transfer is not made, both SCL and SDA are in the "H" state.
When SCL = SDA = "H", change of SDA from "H" to "L" enables the start conditions to start access.
When SCL is "H", change of SDA from "L" to "H" enables the stop conditions to stop access.
Start condition
Stop condition
SCL
SDA
th1
th3
Data transfer and acknowledgement response
After establishment of start conditions, data transfer is made by one byte (8 bits).
Data transfer enables continuous transfer of any number of bytes.
Each time the 8-bit data is transferred, the ACK signal is sent from the receive side to the send side.
The ACK signal is issued when SDA on the send side is released and SDA on the receive side is set "L" immediately
after fall of the clock pulse at the SCL eighth bit of data transfer to "L".
When the next 1-byte transfer is left in the receive state after transmission of the ACK signal from the receive side,
the receive side releases SDA at fall of the SCL ninth clock.
In the I2C bus, there is no CE signal. Instead, 7-bit slave address is assigned to each device and the first byte of
transfer is assigned to the command (R/W) representing the 7-bit slave address and subsequent transfer direction.
The 7-bit address is transferred sequentially from MSB and the second byte is WRITE when the eighth bit is "L" and
READ when the eighth bit is "H".
In LV5219LG, the slave address is specified as (1110100).
M
S
B
L
S
B
A
C
K
M
S
B
L
S
B
A
C
K
M
S
B
L
S
B
A
C
K
W
Start
Slave address
Register address
Data
STOP
SCL
SDA
(WRITE)
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
0
1
0
0
0
0
1
0
0
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
1
0
SDA
(READ)
1
0
1
0
0
1
M
L
A
C
K
M
L
S
B
A
C
K
M
L
S
B
A
C
K
S
S
W
S
S
Start
Slave address
Data 1
Data 2
STOP
B
B
B
B
No.A1083-12/65
LV5219LG
Data transfer write format
The slave address and Write command must be allocated to the first byte and the register address in the serial map
must be designated in the second byte.
For the third byte, data transfer is carried out to the address designated by the register address which is written in the
second byte. Subsequently, if data continues, the register address value is automatically incremented for the fourth
and subsequent bytes.
Thus, continuous data transfer starting at the designated address is made possible.
After the register address reaches 7Fh, the transfer address for the next byte is set to 00h.
Data write example
1
1
1
1
0
1
0
0
0
A
0
0
0
0
0
1
1
1
A
Data 1
A
Slave address
Register address set to 07h
R/W = 0 written
Write data to address 07h
Data 2
A
Data 3
A
Data 4
A
P
Write data to address 08h
Write data to address 09h
Write data to address 0Ah
S
Start condition
P
Stop condition
A
A
ACK signal
Master side transmission
Slave side transmission
S
1
1
1
0
1
0
0
0
A
0
0
1
0
1
1
1
0
A
Sr
1
1
1
0
1
0
0
1
A
Slave address
Register address set to 2Eh
Slave address
R/W = 0 written
Restart
R/W = 1 read
A
Data 1
A
Data 2
P
Read data from address 2Eh
Read data from address 2Fh
Notify end of read by not sending out ACK
A
S
Start condition
P
Stop condition
A
A
ACK signal
Master side transmission
Slave side transmission
Sr
Restart condition
No.A1083-13/65
LV5219LG
Serial modes setting
address : 00h (LEDCTL) LED Setting 1 Register Write
00h (LEDCTL)
Register name
R/W
D7
MLED6
W
D6
MLED5
W
D5
MLED4
W
D4
MSW2
W
D3
MSW1
W
D2
FXSW
W
D1
RGSW
W
D0
STBY
W
Default
0
0
0
0
0
0
0
0
D0 : STBY (Standby setting)
0 : Standby state *Default
1 : Active state
D1 : RGSW (Switching regulator operation setting)
0 : Switching regulator forced to OFF *Default
1 : Switching regulator waiting for step-up
D2 : FXSW (Fixed output voltage mode setting)
0 : Auto step-up mode *Default
1 : Fixed voltage step-up mode (fixed at voltage set through serial VD)
D3 : MSW1 (Main LED output setting (dim mode))
0 : Dim mode OFF *Default
1 : Dim mode ON
D4 : MSW2 (Main LED output setting (normal mode))
0 : Normal mode OFF *Default
1 : Normal mode ON
D5 : MLED4 (MLED4 output setting)
0 : OFF *Default
1 : ON
D6 : MLED5 (MLED5 output setting)
0 : OFF *Default
1 : ON
D7 : MLE6 (MLED6 output setting)
0 : OFF *Default
1 : ON
No.A1083-14/65
LV5219LG
address : 01h (LEDCTL2) LED Setting 2 Register Write
01h (LEDCTL2)
Register name
R/W
D7
SPM6
W
D6
SPM5
W
D5
SPM4
W
D4
SPS2
W
D3
S2SW
W
D2
S1SW
W
D1
MISW
W
D0
VOCSW
W
0
Default
0
0
0
0
0
0
0
D0 : VOCSW (Step-up setting)
0 : Manual setting *Default
1 : Automatic setting
*Sets, when FXSW is set to OFF, whether automatic step-up is to be carried out or not
when LEDs other than the main LEDs are turned on.
In automatic setting mode, stepping-up is carried out when LEDs other than the MLEDs
are turned on.
D1 : MISW
D2 : S1SW
D3 : S2SW
D4 : SPS2
D5 : SPM4
D6 : SPM5
D7 : SPM6
(MICTL setting = Enable brightness adjustment for LEDs other than main LEDs)
0 : MICTL disabled *Default
1 : MICTL enabled
(SLED1 output setting)
0 : OFF *Default
1 : ON
(SLED2 output setting)
0 : OFF *Default
1 : ON
(SLED2 independent control setting)
…
…
0 : OFF
1 : ON
Same operation as SLED1 when set to OFF. *Default
When set to ON, operate as SLED2 set current, independently of SLED1.
(MLED4 independent control setting)
…
…
0 : OFF
1 : ON
Same operation as MLED1, 2, and 3 when set to OFF. *Default
When set to ON, operate as MLED4 set current, irrespective of main LEDs.
(MLED5 independent control setting)
…
…
0 : OFF
1 : ON
Same operation as MLED1, 2, and 3 when set to OFF. *Default
When set to ON, operate as MLED5 set current, irrespective of main LEDs.
(MLED6 independent control setting)
…
…
0 : OFF
1 : ON
Same operation as MLED1, 2, and 3 when set to OFF. *Default
When set to ON, operate as MLED6 set current, irrespective of main LEDs.
No.A1083-15/65
LV5219LG
address : 02h (LEDCTL3) LED Setting 3 Register Write
02h (LEDCTL3)
Register name
R/W
D7
SCSW2
W
D6
B2SW
W
D5
G2SW
W
D4
R2SW
W
D3
SCSW1
W
D2
B1SW
W
D1
G1SW
W
D0
R1SW
W
Default
0
0
0
0
0
0
0
0
D0 : R1SW
D1 : G1SW
D2 : B1SW
(RLED1 output setting)
0 : OFF *Default
1 : ON
(GLED1 output setting)
0 : OFF *Default
1 : ON
(BLED1 output setting)
0 : OFF *Default
1 : ON
D3 : SCSW1 (SCTL signal enable 1 RLED1, GLED1, BLED1 setting)
0 : SCTL enabled *Default
1 : SCTL disabled
D4 : R2SW
D5 : G2SW
D6 : B2SW
(RLED2 output setting)
0 : OFF *Default
1 : ON
(GLED2 output setting)
0 : OFF *Default
1 : ON
(BLED2 output setting)
0 : OFF *Default
1 : ON
D7 : SCSW2 (SCTL signal enable 2 RLED2, GLED2, BLED2 setting)
0 : SCTL enabled *Default
1 : SCTL disabled
*SCTL is the external sync pin input used for the synchronization with the sound signal from the
sound source IC. It turns on and off the tricolor LEDs.
*The SCTL signal can be enabled or disabled with the SCT signal enable setting.
The relationships among SCSW, SCTL, and RLED, GLED, and BLED are shown below.
SCSW1
SCTL pin
RLED1, GLED1, BLED1 State
Forced off regardless of the serial command when
set to turn off.
0
0
1
1
L
H
L
Turn off
When set to "turn-on enable," the LEDs can be
turned on with the serial command R1SW, G1SW, or
B1SW, or can be automatically turned on and off in
the gradation/pulse mode.
Turn-on enable
Turn-on enable
Turn-on enable
H
SCSW2
SCTL pin
RLED2, GLED2, BLED2 State
Turn off
Forced off regardless of the serial command when
set to turn off.
0
0
1
1
L
H
L
When set to "turn-on enable," the LEDs can be
turned on with the serial command R2SW, G2SW, or
B2SW, or B1SW, or can be automatically turned on
and off in the gradation/pulse mode.
Turn-on enable
Turn-on enable
Turn-on enable
H
No.A1083-16/65
LV5219LG
address : 03h (LEDCTL4) LED Setting 4 Register Write
03h (LEDCTL4)
Register name
R/W
D7
MFSW
W
D6
KESW4
W
D5
KESW3
W
D4
KESW2
W
D3
KESW1
W
D2
F3SW
W
D1
F2SW
W
D0
F1SW
W
Default
0
0
0
0
0
0
0
0
D0 : F1SW
D1 : F2SW
D2 : F3SW
(FLED1 output setting)
0 : OFF *Default
1 : ON
(FLED2 output setting)
0 : OFF *Default
1 : ON
(FLED3 output setting)
0 : OFF *Default
1 : ON
D3 : KESW1 (KLED1 output setting 1)
0 : Forced *Default
1 : Automatic
D4 : KESW2 (KLED1 output setting 2)
0 : OFF *Default
1 : ON
* Controllable only when KESW1 is set to "Forced."
D5 : KESW3 (KLED2 output setting 1)
0 : Forced *Default
1 : Automatic
D6 : KESW4 (KLED2 output setting 2)
0 : OFF *Default
1 : ON
* Controllable only when KESW3 is set to "Forced."
D7 : MFSW (Main LED filter ON/OFF setting)
0 : OFF *Default
1 : ON
*Operate for main LED current other that dim mode.
No.A1083-17/65
LV5219LG
address : 04h (MLEDDACTL) MLED Current Setting Register Write
04h (MLEDDACTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
MAINL [2]
MAINL [1]
MAINL [0]
MAINH [4]
MAINH [3]
MAINH [2]
MAINH [1]
MAINH [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D4 : MAINH [0] to MAINH [4] (MLED1, 2, and 3 current settings (normal mode))
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
LED is turned off when these bits are set to 11111. Fade out operation
using this setting is prohibited.
D5 to D7 : MAINL [0] to MAINL [2] (MLED current settings (dim mode))
D7
D6
D5
Current value (mA)
0
0
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.0
*Default
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
LED is turned off when these bits are set to 111. Fade out operation
using this setting is prohibited.
Use of fade out operation is inhibited.
No.A1083-18/65
LV5219LG
address : 05h (M4DACTL) MLED4 Current Setting Register Write
05h (M4DACTL)
Register name
R/W
D7
D6
D5
D4
M4C [4]
W
D3
M4C [3]
W
D2
M4C [2]
W
D1
M4C [1]
W
D0
M4C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : M4C [0] to M4C [4] (MLED4 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
No.A1083-19/65
LV5219LG
address : 06h (M5DACTL) MLED5 Current Setting Register Write
06h (M5DACTL)
Register name
R/W
D7
D6
D5
D4
M5C [4]
W
D3
M5C [3]
W
D2
M5C [2]
W
D1
M5C [1]
W
D0
M5C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : M5C [0] to M5C [4] (MLED5 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
No.A1083-20/65
LV5219LG
address : 07h (M6_VD_DACTL) MLED6 Current Setting/Output Setting Register Write
07h (M6_VD_DACTL)
Register name
R/W
D7
VD [2]
W
D6
VD [1]
W
D5
VD [0]
W
D4
M6C [4]
W
D3
M6C [3]
W
D2
M6C [2]
W
D1
M6C [1]
W
D0
M6C [0]
W
Default
0
0
0
0
0
0
0
0
D0 to D4 : M6C [0] to M6C [4] (MLED6 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
D5 to D7 : VD [0] to VD [2] (Output DC settings)
D7
D6
D5
Output Voltage (V)
0
0
0
5.0
4.3
4.5
4.7
4.9
5.1
5.3
5.5
*Default
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
No.A1083-21/65
LV5219LG
address : 08h (S1DACTL) SLED1 Current Setting Register Write
08h (S1DACTL)
Register name
R/W
D7
D6
D5
D4
S1C [4]
W
D3
S1C [3]
W
D2
S1C [2]
W
D1
S1C [1]
W
D0
S1C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : S1C [0] to S1C [4] (SLED1 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
LED is turned off when these bits are set to 11111. Fade out operation
using this setting is prohibited.
No.A1083-22/65
LV5219LG
address : 09h (S2DACTL) SLED2 Current Setting Register Write
09h (S2DACTL)
Register name
R/W
D7
D6
D5
D4
S2C [4]
W
D3
S2C [3]
W
D2
S2C [2]
W
D1
S2C [1]
W
D0
S2C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : S2C [0] to S2C [4] (SLED2 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
No.A1083-23/65
LV5219LG
address : 0Ah (R1DACTL) RLED1 Current Setting Register Write
0Ah (R1DACTL)
Register name
R/W
D7
D6
D5
D4
R1C [4]
W
D3
R1C [3]
W
D2
R1C [2]
W
D1
R1C [1]
W
D0
R1C [0]
W
MAXC1 [2]
MAXC1 [1]
MAXC1 [0]
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : R1C [0] to R1C [4] (RLED1 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
LED is turned off when these bits are set to 11111. Fade out operation
using this setting is prohibited.
D5 to D7 : MAXC1 [0] to MAXC1 [2] (Group 1 (RLED1, GLED1, BLED1) maximum current value settings)
D7
D6
D5
Max. Current value (mA)
0
0
0
18.6 (100%)
*Default
0
0
1
16.275 (87%)
13.95 (75%)
0
1
0
0
1
1
11.625 (62.5%)
9.3 (50%)
1
0
0
1
0
1
6.975 (37.5%)
4.65 (25%)
1
1
0
1
1
1
2.325 (12.5%)
No.A1083-24/65
LV5219LG
address : 0Bh (G1DACTL) GLED1 Current Setting Register Write
0Bh (G1DACTL)
Register name
R/W
D7
D6
D5
D4
G1C [4]
W
D3
G1C [3]
W
D2
G1C [2]
W
D1
G1C [1]
W
D0
G1C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : G1C [0] to G1C [4] (GLED1 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
LED is turned off when these bits are set to 11111. Fade out operation
using this setting is prohibited.
No.A1083-25/65
LV5219LG
address : 0Ch (B1DACTL) BLED1 Current Setting Register Write
0Ch (B1DACTL)
Register name
R/W
D7
D6
D5
D4
B1C [4]
W
D3
B1C [3]
W
D2
B1C [2]
W
D1
B1C [1]
W
D0
B1C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : B1C [0] to B1C [4] (BLED1 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
LED is turned off when these bits are set to 11111. Fade out operation
using this setting is prohibited.
No.A1083-26/65
LV5219LG
address : 0Dh (R2DACTL) RLED2 Current Setting Register Write
0Dh (R2DACTL)
Register name
R/W
D7
D6
D5
D4
R2C [4]
W
D3
R2C [3]
W
D2
R2C [2]
W
D1
R2C [1]
W
D0
R2C [0]
W
MAXC2 [2]
MAXC2 [1]
MAXC2 [0]
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : R2C [0] to R2C [4] (RLED2 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
LED is turned off when these bits are set to 11111. Fade out operation
using this setting is prohibited.
D5 to D7 : MAXC2 [0] to MAXC2 [2] (Group 2 (RLED2, GLED2, BLED2) maximum current value settings)
D7
D6
D5
Max. Current value (mA)
0
0
0
18.6 (100%)
*Default
0
0
1
16.275 (87%)
13.95 (75%)
0
1
0
0
1
1
11.625 (62.5%)
9.3 (50%)
1
0
0
1
0
1
6.975 (37.5%)
4.65 (25%)
1
1
0
1
1
1
2.325 (12.5%)
No.A1083-27/65
LV5219LG
address : 0Eh (G2DACTL) GLED2 Current Setting Register Write
0Eh (G2DACTL)
Register name
R/W
D7
D6
D5
D4
G2C [4]
W
D3
G2C [3]
W
D2
G2C [2]
W
D1
G2C [1]
W
D0
G2C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : G2C [0] to G2C [4] (GLED2 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
LED is turned off when these bits are set to 11111. Fade out operation
using this setting is prohibited.
No.A1083-28/65
LV5219LG
address : 0Fh (B2DACTL) BLED2 Current Setting Register Write
0Fh (B2DACTL)
Register name
R/W
D7
D6
D5
D4
B2C [4]
W
D3
B2C [3]
W
D2
B2C [2]
W
D1
B2C [1]
W
D0
B2C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : B2C [0] to B2C [4] (BLED2 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
LED is turned off when these bits are set to 11111. Fade out operation
using this setting is prohibited.
No.A1083-29/65
LV5219LG
address : 10h (F1DACTL) FLED1 Current Setting Register Write
10h (F1DACTL)
Register name
R/W
D7
D6
D5
D4
F1C [4]
W
D3
F1C [3]
W
D2
F1C [2]
W
D1
F1C [1]
W
D0
F1C [0]
W
MAXCF [2]
MAXCF [1]
MAXCF [0]
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : F1C [0] to F1C [4] (FLED1 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
D5 to D7 : MAXCF [0] to MAXCF [2] (Flash LED (FLED1, FLED2, FLED3) maximum current value settings)
D7
D6
D5
Max. Current value (mA)
0
0
0
18.6 (100%)
*Default
0
0
1
16.275 (87%)
13.95 (75%)
0
1
0
0
1
1
11.625 (62.5%)
9.3 (50%)
1
0
0
1
0
1
6.975 (37.5%)
4.65 (25%)
1
1
0
1
1
1
2.325 (12.5%)
No.A1083-30/65
LV5219LG
address : 11h (F2DACTL) FLED2 Current Setting Register Write
11h (F2DACTL)
Register name
R/W
D7
D6
D5
D4
F2C [4]
W
D3
F2C [3]
W
D2
F2C [2]
W
D1
F2C [1]
W
D0
F2C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : F2C [0] to F2C [4] (FLED2 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
No.A1083-31/65
LV5219LG
address : 12h (F3DACTL) FLED3 Current Setting Register Write
12h (F3DACTL)
Register name
R/W
D7
D6
D5
D4
F3C [4]
W
D3
F3C [3]
W
D2
F3C [2]
W
D1
F3C [1]
W
D0
F3C [0]
W
-
-
-
W
0
W
0
W
0
Default
0
0
0
0
0
D0 to D4 : F3C [0] to F3C [4] (FLED3 current settings)
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.6
*Default
1.2
1.8
2.4
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
14.4
15.0
15.6
16.2
16.8
17.4
18.0
18.6
0.0
No.A1083-32/65
LV5219LG
address : 13h (MFCTL) MLED Fade Time Setting Register Write
13h (MFCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
MFOUT [2]
MFOUT [1]
MFOUT [0]
MFIN [2]
MFIN [1]
MFIN [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D2 : MFIN [0] to MFIN [2] (Fin slope settings (MLED))
D2
D1
D0
MFIN (Normal Mode)
MFIN (Dim Mode)
No slope
0.012s
0
0
0
No slope
0.050s
0.1s
*Default
0
0
1
0
1
0
0.025s
0
1
1
0.15s
0.2s
0.04s
1
0
0
0.05s
1
0
1
0.25s
0.3s
0.065s
1
1
0
0.08s
1
1
1
0.5s
0.125s
D3 to D5 : MFOUT [0] to MFOUT [2] (Fout slope settings (MLED))
D5
D4
D3
MFOUT (Normal Mode)
MFOUT (Dim Mode)
No slope
0.025s
0
0
0
No slope
0.1s
*Default
0
0
1
0
1
0
0.15s
0.2s
0.04s
0
1
1
0.05s
1
0
0
0.25s
0.3s
0.065s
1
0
1
0.08s
1
1
0
0.5s
0.125s
1
1
1
1.0s
0.25s
address : 14h (SFCTL) MLED Fade Time Setting Register Write
14h (SFCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
SFOUT [2]
SFOUT [1]
SFOUT [0]
SFIN [2]
SFIN [1]
SFIN [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D2 : SFIN [0] to SFIN [2] (Fin slope settings (SLED1, SLED2))
D2
D1
D0
SFIN
No slope
0.050s
0.1s
0
0
0
*Default
0
0
1
0
1
0
0
1
1
0.15s
0.2s
1
0
0
1
0
1
0.25s
0.3s
1
1
0
1
1
1
0.5s
D3 to D5 : SFOUT [0] to SFOUT [2] (Fout slope settings (SLED1, SLED2))
D5
D4
D3
SFOUT
No slope
0.1s
0
0
0
*Default
0
0
1
0
1
0
0.15s
0.2s
0
1
1
1
0
0
0.25s
0.3s
1
0
1
1
1
0
0.5s
1
1
1
1.0s
No.A1083-33/65
LV5219LG
address : 15h (R1FCTL) RLED1 Fade Time Setting Register Write
15h (R1FCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
R1FOUT [2] R1FOUT [1]
R1FOUT [0]
R1FIN [2]
R1FIN [1]
R1FIN [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D2 : R1FIN [0] to R1FIN [2] (Fin slope settings (RLED1))
D2
D1
D0
R1FIN
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT1 time setting.
D3 to D5 : R1FOUT [0] to R1FOUT [2] (Fout slope settings (RLED1))
D5
D4
D3
R1FOUT
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT1 time setting.
address : 16h (G1FCTL) GLED1 Fade Time Setting Register Write
16h (G1FCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
G1FOUT [2] G1FOUT [1] G1FOUT [0]
G1FIN [2]
G1FIN [1]
G1FIN [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D2 : G1FIN [0] to G1FIN [2] (Fin slope settings (GLED1))
D2
D1
D0
G1FIN
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT1 time setting.
D3 to D5 : G1FOUT [0] to G1FOUT [2] (Fout slope settings (GLED1))
D5
D4
D3
G1FOUT
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT1 time setting.
No.A1083-34/65
LV5219LG
address : 17h (B1FCTL) BLED1 Fade Time Setting Register Write
17h (B1FCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
B1FOUT [2]
B1FOUT [1]
B1FOUT [0]
B1FIN [2]
B1FIN [1]
B1FIN [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D2 : B1FIN [0] to B1FIN [2] (Fin slope settings (BLED1))
D2
D1
D0
B1FIN
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT1 time setting.
D3 to D5 : B1FOUT [0] to B1FOUT [2] (Fout slope settings (BLED1))
D5
D4
D3
B1FOUT
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT1 time setting.
No.A1083-35/65
LV5219LG
address : 18h (RGB1GRCTL) RGB1 Gradation Setting Register Write
18h (RGB1GRCTL)
Register name
R/W
D7
GHB1
W
D6
GHG1
W
D5
GHR1
W
D4
GR1M1
W
D3
GRON1
W
D2
AT1 [2]
W
D1
AT1 [1]
W
D0
AT1 [0]
W
Default
0
0
0
0
0
0
0
0
D0 to D2 : AT1 [0] to AT1 [2] (Automatic ON/OFF period settings (RED1, GLED1, BLED1))
D2
D1
D0
AT1
0.0625s
0.125s
0.25s
0.5s
1s
0
0
0
*Default
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
2s
1
1
0
4s
1
1
1
8s
D3 : GRON1 (Automatic ON/OFF function setting (RLED1, GLED1, BLED1))
0 : OFF *Default
1 : ON
D4 : GR1M1 (Execute gradation once (RLED1, GLED1, BLED1))
0 : OFF *Default
1 : ON
D5 : GHR1
D6 : GHG1
D7 : GHB1
(Period mode setting (RLED1))
0 : Standard period *Default
1 : 1/2 period
(Period mode setting (GLED1))
0 : Standard period *Default
1 : 1/2 period
(Period mode setting (BLED1))
0 : Standard period *Default
1 : 1/2 period
No.A1083-36/65
LV5219LG
address : 19h (RGB1PUCTL) RGB1 Pulse Mode Setting Register Write
19h (RGB1PUCTL)
Register name
R/W
D7
D6
PRON1
W
D5
PT1 [2]
W
D4
PT1 [1]
W
D3
PT1 [0]
W
D2
HO1 [2]
W
D1
HO1 [1]
W
D0
HO1 [0]
W
-
W
0
Default
0
0
0
0
0
0
0
D0 to D2 : HO1 [0] to HO1 [2] (Hold time settings (RLED1, GRLD1, BLED1))
D2
D1
D0
HOLD TIME
0
0
0
None
*Default
0
0
1
ON/OFF period ×1
ON/OFF period ×2
ON/OFF period ×3
ON/OFF period ×4
ON/OFF period ×5
ON/OFF period ×6
ON/OFF period ×7
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
D3 to D5 : PT1 [0] to PT1 [2] (Flashing count settings (RLED1, GRLD1, BLED1))
D5
D4
D3
Pulse Count
0
0
0
ON/OFF period ×1
ON/OFF period ×2
ON/OFF period ×3
ON/OFF period ×4
ON/OFF period ×5
ON/OFF period ×6
ON/OFF period ×7
ON/OFF period ×8
*Default
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
D6 : PRON1 (Pulse mode setting (RLED1, GRLD1, BLED1))
0 : OFF *Default
1 : Pulse mode
No.A1083-37/65
LV5219LG
address : 1Ah (R1AOFFCTL) RLED1 OFF Position Setting Register Write
1Ah (R1AOFFCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
R1Aoff [5]
R1Aoff [4]
R1Aoff [3]
R1Aoff [2]
R1Aoff [1]
R1Aoff [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : R1Aoff [0] to R1Aoff [5] (RLED1 automatic OFF position settings)
address : 1Bh (R1AONCTL) RLED1 ON Position Setting Register Write
1Bh (R1AONCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
R1Aon [5]
R1Aon [4]
R1Aon [3]
R1Aon [2]
R1Aon [1]
R1Aon [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : R1Aon [0] to R1Aon [5] (RLED1 automatic ON position settings)
*R1Aoff = R1Aon = FF specifies "ON throughout the entire period."
R1Aoff = R1Aon ≠ FF specifies "Off throughout the entire period."
LED control output waveform (RLED1), same for GLED1 and BLED1.
Rise position of clock 0 when D5 - D0 are set to all 0.
Rise position of clock 63 when D5 - D0 are set to all 1.
64 counts
Gradation clock
0
1
2
3
4
63
0
5 counts
59 counts
RLED1
ON period
OFF period
R1off
R1on
When :R1on R1AONCTL 00000000 (00h)
R1off R1AOFFCTL 00000101 (05h)
address : 1Ch (G1AOFFCTL) GLED1 OFF Position Setting Register Write
1Ch (G1AOFFCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
G1Aoff [5]
G1Aoff [4]
G1Aoff [3]
G1Aoff [2]
G1Aoff [1]
G1Aoff [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : G1Aoff [0] to G1Aoff [5] (GLED1 automatic OFF position settings)
No.A1083-38/65
LV5219LG
address : 1Dh (G1AONCTL) GLED1 ON Position Setting Register Write
1Dh (G1AONCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
G1Aon [5]
G1Aon [4]
G1Aon [3]
G1Aon [2]
G1Aon [1]
G1Aon [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : G1Aon [0] to G1Aon [5] (GLED1 automatic ON position settings)
*G1Aoff = G1Aon = FF specifies "ON throughout the entire period."
G1Aoff = G1Aon ≠ FF specifies "OFF throughout the entire period."
address : 1Eh (B1AOFFCTL) BLED1 OFF Position Setting Register Write
1Eh (B1AOFFCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
B1Aoff [5]
B1Aoff [4]
B1Aoff [3]
B1Aoff [2]
B1Aoff [1]
B1Aoff [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : B1Aoff [0] to B1Aoff [5] (BLED1 automatic OFF position settings)
address : 1Fh (B1AONCTL) BLED1 ON Position Setting Register Write
1Fh (B1AONCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
B1Aon [5]
B1Aon [4]
B1Aon [3]
B1Aon [2]
B1Aon [1]
B1Aon [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : B1Aon [0] to B1Aon [5] (BLED1 automatic ON position settings)
*B1Aoff = B1Aon = FF specifies "ON throughout the entire period."
B1Aoff = B1Aon ≠ FF specifies "OFF throughout the entire period."
No.A1083-39/65
LV5219LG
address : 20h (R2FCTL) RLED2 Fade Time Setting Register Write
20h (R2FCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
R2FOUT [2] R2FOUT [1]
R2FOUT [0]
R2FIN [2]
R2FIN [1]
R2FIN [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D2 : R2FIN [0] to R2FIN [2] (Fin slope settings (RLED2))
D2
D1
D0
R2FIN
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT2 time setting.
D3 to D5 : R2FOUT [0] to R2FOUT [2] (Fout slope settings (RLED2))
D5
D4
D3
R2FOUT
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT2 time setting.
address : 21h (G2FCTL) GLED2 Fade Time Setting Register Write
21h (G2FCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
G2FOUT [2] G2FOUT [1] G2FOUT [0]
G2FIN [2]
G2FIN [1]
G2FIN [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D2 : G2FIN [0] to G2FIN [2] (Fin slope settings (GLED2))
D2
D1
D0
G2FIN
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT2 time setting.
D3 to D5 : G2FOUT [0] to G2FOUT [2] (Fout slope settings (GLED2))
D5
D4
D3
G2FOUT
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT2 time setting.
No.A1083-40/65
LV5219LG
address : 22h (B2FCTL) BLED2 Fade Time Setting Register Write
22h (B2FCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
B2FOUT [2]
B2FOUT [1]
B2FOUT [0]
B2FIN [2]
B2FIN [1]
B2FIN [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D2 : B2FIN [0] to B2FIN [2] (Fin slope settings (BLED2))
D2
D1
D0
B2FIN
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT2 time setting.
D3 to D5 : B2FOUT [0] to B2FOUT [2] (Fout slope settings (BLED2))
D5
D4
D3
R2FOUT
No slope
1/16
0
0
0
*Default
0
0
1
0
1
0
1/8
0
1
1
1/4
1
0
0
3/8
1
0
1
1/2
1
1
0
3/4
1
1
1
Slope MAX
The slope time MAX is 1/2 of the AT2 time setting.
No.A1083-41/65
LV5219LG
address : 23h (RGB2GRCTL) RGB2 Gradation Setting Register Write
23h (RGB2GRCTL)
Register name
R/W
D7
GHB2
W
D6
GHG2
W
D5
GHR2
W
D4
GR1M2
W
D3
GRON2
W
D2
AT2 [2]
W
D1
AT2 [1]
W
D0
AT2 [0]
W
Default
0
0
0
0
0
0
0
0
D0 to D2 : AT2 [0] to AT2 [2] (Automatic ON/OFF period settings (RED2, GLED2, BLED2))
D2
D1
D0
AT2
0.0625s
0.125s
0.25s
0.5s
1s
0
0
0
*Default
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
2s
1
1
0
4s
1
1
1
8s
D3 : GRON2 (Automatic ON/OFF function setting (RLED2, GLED2, BLED2))
0 : OFF *Default
1 : ON
D4 : GR1M2 (Execute gradation once (RLED2, GLED2, BLED2))
0 : OFF *Default
1 : ON
D5 : GHR2
D6 : GHG2
D7 : GHB2
(Period mode setting (RLED2))
0 : Standard period *Default
1 : 1/2 period
(Period mode setting (GLED2))
0 : Standard period *Default
1 : 1/2 period
(Period mode setting (BLED2))
0 : Standard period *Default
1 : 1/2 period
No.A1083-42/65
LV5219LG
address : 24h (RGB2PUCTL) RGB2 Pulse Mode Setting Register Write
24h (RGB2PUCTL)
Register name
R/W
D7
D6
PRON2
W
D5
PT2 [2]
W
D4
PT2 [1]
W
D3
PT2 [0]
W
D2
HO2 [2]
W
D1
HO2 [1]
W
D0
HO2 [0]
W
-
W
0
Default
0
0
0
0
0
0
0
D0 to D2 : HO2 [0] to HO2 [2] (Hold time settings (RLED2, GRLD2, BLED2))
D2
D1
D0
HOLD TIME
0
0
0
None
*Default
0
0
1
ON/OFF period ×1
ON/OFF period ×2
ON/OFF period ×3
ON/OFF period ×4
ON/OFF period ×5
ON/OFF period ×6
ON/OFF period ×7
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
D3 to D5 : PT2 [0] to PT2 [2] (Flashing count settings (RLED2, GRLD2, BLED2))
D5
D4
D3
PULSE
0
0
0
ON/OFF period ×1
ON/OFF period ×2
ON/OFF period ×3
ON/OFF period ×4
ON/OFF period ×5
ON/OFF period ×6
ON/OFF period ×7
ON/OFF period ×8
*Default
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
D6 : PRON2 (Pulse mode setting (RLED2, GRLD2, BLED2))
0 : OFF *Default
1 : Pulse mode
No.A1083-43/65
LV5219LG
address : 25h (R2AOFFCTL) RLED2 OFF Position Setting Register Write
25h (R2AOFFCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
R2Aoff [5]
R2Aoff [4]
R2Aoff [3]
R2Aoff [2]
R2Aoff [1]
R2Aoff [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : R2Aoff [0] to R2Aoff [5] (RLED2 automatic OFF position settings)
address : 26h (R2AONCTL) RLED2 ON Position Setting Register Write
26h (R2AONCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
R2Aon [5]
R2Aon [4]
R2Aon [3]
R2Aon [2]
R2Aon [1]
R2Aon [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : R2Aon [0] to R2Aon [5] (RLED2 automatic ON position settings)
*R2Aoff = R2Aon = FF specifies "ON throughout the entire period."
R2Aoff = R2Aon ≠ FF specifies "OFF throughout the entire period."
LED control output waveform (RLED2), same for GLED2 and BLED2.
Rise position of clock 0 when D5 - D0 are set to all 0.
Rise position of clock 63 when D5 - D0 are set to all 1.
64 counts
Gradation clock
0
1
2
3
4
63
0
5 counts
59 counts
RLED2
ON period
OFF period
R1off
R1on
When :R2on R2AONCTL 00000000 (00h)
R2off R2AOFFCTL 00000101 (05h)
address : 27h (G2AOFFCTL) GLED2 OFF Position Setting Register Write
27h (G2AOFFCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
G2Aoff [5]
G2Aoff [4]
G2Aoff [3]
G2Aoff [2]
G2Aoff [1]
G2Aoff [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : G2Aoff [0] to G2Aoff [5] (GLED2 automatic OFF position settings)
No.A1083-44/65
LV5219LG
address : 28h (G2AONCTL) GLED2 ON Position Setting Register Write
28h (G2AONCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
G2Aon [5]
G2Aon [4]
G2Aon [3]
G2Aon [2]
G2Aon [1]
G2Aon [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : G2Aon [0] to G2Aon [5] (GLED2 automatic ON position settings)
*G2Aoff = G2Aon = FF specifies "ON throughout the entire period."
G2Aoff = G2Aon ≠ FF specifies "OFF throughout the entire period."
address : 29h (B2AOFFCTL) BLED2 OFF Position Setting Register Write
29h (B2AOFFCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
B2Aoff [5]
B2Aoff [4]
B2Aoff [3]
B2Aoff [2]
B2Aoff [1]
B2Aoff [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : B2Aoff [0] to B2Aoff [5] (BLED2 automatic OFF position settings)
address : 2Ah (B2AONCTL) BLED2 ON Position Setting Register Write
2Ah (B2AONCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
-
B2Aon [5]
B2Aon [4]
B2Aon [3]
B2Aon [2]
B2Aon [1]
B2Aon [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D5 : B2Aon [0] to B2Aon [5] (BLED2 automatic ON position settings)
*B2Aoff = B2Aon = FF specifies "ON throughout the entire period."
B2Aoff = B2Aon ≠ FF specifies "OFF throughout the entire period."
No.A1083-45/65
LV5219LG
address : 2Bh (KEYCTL) KLED1, KLED2 Changeover Voltage Setting Register Write
2Bh (KEYCTL)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
KEY2C [3]
KEY2C [2]
KEY2C [1]
KEY2C [0]
KEY1C [3]
KEY1C [2]
KEY1C [1]
KEY1C [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D3 : KEY1C [0] to KEY1C [3] (KEYLED control changeover voltage)
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
KEY1C
Bright→Dark
Brightness 1
Brightness 2
Brightness 3
Brightness 4
Brightness 5
Brightness 6
Brightness 7
Brightness 8
Brightness 9
Brightness 10
Brightness 11
Brightness 12
Brightness 13
Brightness 14
Brightness 15
Inhibited
*Default
*Lit (KLED : ON) when dark if KLED automatic ON is set.
*The setting brightness 2 means that KLED turns on when a changeover from brightness 3 to brightness 2 occurs if
KLED automatic ON is set.
D4 to D7 : KEY2C [0] to KEY2C [3] (KEYLED control changeover voltage)
D7
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D6
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D5
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D4
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
KEY2C
Bright→Dark
Brightness 1
Brightness 2
Brightness 3
Brightness 4
Brightness 5
Brightness 6
Brightness 7
Brightness 8
Brightness 9
Brightness 10
Brightness 11
Brightness 12
Brightness 13
Brightness 14
Brightness 15
Inhibited
*Default
*Lit (KLED : ON) when dark if KLED automatic ON is set.
*The setting brightness 2 means that KLED turns on when a changeover from brightness 3 to brightness 2 occurs if
KLED automatic ON is set.
No.A1083-46/65
LV5219LG
Brightness Levels
Brightness
(Lx)
Threshold Current
Threshold Voltage
(V)
Brightness Level
(μA)
The resistance value of the external reresistor is 22KΩ
Brightness 1
Brightness 2
Brightness 3
Brightness 4
Brightness 5
Brightness 6
Brightness 7
Brightness 8
Brightness 9
Brightness 10
Brightness 11
Brightness 12
Brightness 13
Brightness 14
Brightness 15
Brightness 16
Compatible with LOG type brightness sensor.
25
40
11
0.25
0.29
0.33
0.38
0.42
0.46
0.50
0.55
0.59
0.63
0.67
0.72
0.76
0.80
0.84
Adjustment of sensor variations sensitivity variance
When TDA 0.42V is set
12.8
14.6
16.3
18
When TAU 0.84V is set
60
90
140
220
350
550
850
1300
1900
3000
5000
7000
10000
19.7
21.4
23.1
24.8
26.5
28.2
30.5
33
35.5
38
Relationship between Brightness and Threshold Current
45
40
35
30
25
20
15
10
5
0
2
3
5
7
2
3
5
7
2
3
5
7
2
3
5 7
1
10
100
1000
10000
Brightness – Lx
No.A1083-47/65
LV5219LG
address : 2Ch (PTCTL) Automatic Brightness Control Mode Setting 1 Register Write
2Ch (PTCTL)
Register name
R/W
D7
SWCTL
W
D6
PTSW
W
D5
KISW
W
D4
D3
D2
D1
D0
SMPN [1]
SMPN [0]
SMPF [2]
SMPF [1]
SMPF [0]
W
0
W
0
W
0
W
0
W
0
Default
0
0
0
D0 to D2 : SMPF [0] to SMPF [2] (Brightness sensor sampling period settings)
D2
D1
D0
SMPF
131.072ms
262.144ms
524.288ms
1.049s
0
0
0
*Default
0
0
1
0
1
0
0
1
1
1
0
0
2.098s
1
0
1
4.196s
1
1
0
8.392s
1
1
1
20ms
SMPF
20ms
PTEN
19ms
18ms
Interrupt
PTSW:1
Status change : Flush
* Continuous operation when SMPF is set to 20 ms and intermittent operation otherwise.
D3 to D4 : SMPN [0] to SMPN [1] (Brightness sensor sampling count settings)
D4
D3
SMPN
0
0
1 time
*Default
0
1
2 times
3 times
4 times
1
0
1
1
D5 : KISW
D6 : PTSW
(MLED fixed/automatic current settings)
0 : Fixed *Default
1 : Automatic (brightness control)
(Sensor ON/OFF)
0 : OFF *Default
1 : ON
D7 : SWCTL (Sensor ON/OFF SW polarity)
0 : Standard *Default
1 : Inverted
No.A1083-48/65
LV5219LG
address : 2Dh (INTMASK) INT Mask Setting Register Write
2Dh (INTMASK)
Register name
R/W
D7
INTCR
W
D6
D5
INTM6
W
D4
INTM5
W
D3
INTM4
W
D2
INTM3
W
D1
INTM2
W
D0
INTM1
W
-
W
0
Default
0
0
0
0
0
0
0
D0 : INTM1 (INT1 mask setting - interrupt source 1 mask)
0 : OFF *Default
1 : ON
D1 : INTM2 (INT2 mask setting - interrupt source 2 mask)
0 : OFF *Default
1 : ON
D2 : INTM3 (INT3 mask setting - interrupt source 3 mask)
0 : OFF *Default
1 : ON
D3 : INTM4 (INT4 mask setting - interrupt source 4 mask)
0 : OFF *Default
1 : ON
D4 : INTM5 (INT5 mask setting - interrupt source 5 mask)
0 : OFF *Default
1 : ON
D5 : INTM6 (INT6 mask setting - interrupt source 6 mask)
0 : OFF *Default
1 : ON
D7 : INTCR (INT clear)
0 : INT accepted *Default
1 : INT cleared
*This bit is set to 0 to enable interrupts after the interrupt is cleared.
No.A1083-49/65
LV5219LG
address : 2Eh (INTDET) INT Detection Register - Read only
2Eh (INTDET)
Register name
R/W
D7
D6
D5
INT6
R
D4
INT5
R
D3
INT4
R
D2
INT3
R
D1
INT2
R
D0
INT1
R
-
-
R
0
R
0
Default
0
0
0
0
0
0
D0 : INT1
D1 : INT2
D2 : INT3
D3 : INT4
D4 : INT5
D5 : INT6
(interrupt source 1)
0 : OFF *Default
1 : ON
*Brightness detection for KEY-LED (read only)
(interrupt source 2)
0 : OFF *Default
1 : ON
*End of white LED fade IN/OUT (read only)
(interrupt source 3)
0 : OFF *Default
1 : ON
*End of group 1 (RLED1, GLED1, BLED1) fade IN/OU (read only)
(interrupt source 4)
0 : OFF *Default
1 : ON
*End of group 2(RLED2, GLED2, BLED2) fade IN/OU (read only)
(interrupt source 5)
0 : OFF *Default
1 : ON
*End of group 1 (RLED1, GLED1, BLED1) gradation (read only)
(interrupt source 6)
0 : OFF *Default
1 : ON
*End of group 2(RLED2, GLED2, BLED2) gradation (read only)
Interrupts associated with the 1 bits of the INT Detection Register occur.
No.A1083-50/65
LV5219LG
address : 2Fh (STATUS) Status Detect Register - Read only
2Fh (STATUS)
Register name
R/W
D7
XM [3]
R
D6
XM [2]
R
D5
XM [1]
R
D4
XM [0]
R
D3
-
D2
-
D1
D0
DCDC
R
KEYON
R
0
R
0
R
0
Default
0
0
0
0
0
D0 : DCDC
(DC/DC step-up state (read only))
…
…
0 : Through
1 : Step-up
DC/DC is not stepped-up. *Default
DC/DC stepped-up.
D1 : KEYON (KEY ON/OFF(read only))
…
…
0 : OFF
1 : ON
Brightness is above or equal to the KEYLED changeover voltage. *Default
Brightness is less than the KEYLED changeover voltage.
D4 to D7 : XM [0] to XM [3] (Brightness information (read only))
D7
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D6
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D5
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D4
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
XM
Brightness 1
Brightness 2
Brightness 3
Brightness 4
Brightness 5
Brightness 6
Brightness 7
Brightness 8
Brightness 9
Brightness 10
Brightness 11
Brightness 12
Brightness 13
Brightness 14
Brightness 15
Brightness 16
*Default
No.A1083-51/65
LV5219LG
address : 30h (PTMDACTL0) Automatic Brightness Control Mode Current Settings 0 Register Write
30h (PTMDACTL0)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN0 [6]
YMAIN0 [5]
YMAIN0 [4]
YMAIN0 [3]
YMAIN0 [2]
YMAIN0 [1]
YMAIN0 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN0 [0] to YMIAN0 [6] (MLED current settings (normal mode) * MLED current settings for
brightness 1
D6
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
D5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
0.15 inhibited
0.3 inhibited
0.45 inhibited
0.6
0.75
0.90
1.05
1.20
1.35
1.50
1.65
1.80
1.95
2.10
2.25
2.40
2.55
2.70
2.85
3.00
3.15
3.30
3.45
3.60
3.75
3.90
4.05
4.20
4.35
4.50
4.65
4.80
4.95
5.10
5.25
5.40
5.55
5.70
5.85
6.00
6.15
6.30
6.45
6.60
6.75
6.90
Continued on next page.
No.A1083-52/65
LV5219LG
Continued from preceding page.
D6
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
D4
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
D3
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
D2
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
D1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
7.05
7.20
7.35
7.50
7.65
7.80
7.95
8.10
8.25
8.40
8.55
8.70
8.85
9.00
9.15
9.30
9.45
9.60
9.75
9.90
10.05
10.20
10.35
10.50
10.65
10.80
10.95
11.10
11.25
11.40
11.55
11.70
11.85
12.00
12.15
12.30
12.45
12.60
12.75
12.90
13.05
13.20
13.35
13.50
13.65
13.80
13.95
14.10
14.25
14.40
14.55
14.70
Continued on next page.
No.A1083-53/65
LV5219LG
Continued from preceding page.
D6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
D3
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Current value (mA)
14.85
15.00
15.15
15.30
15.45
15.60
15.75
15.90
16.05
16.20
16.35
16.50
16.65
16.80
16.95
17.10
17.25
17.40
17.55
17.70
17.85
18.00
18.15
18.30
18.45
18.60
0.00
0.00
0.00
0.00
address : 31h (PTMDACTL1) Automatic Brightness Control Mode Current Setting 1 Register Write
31h (PTMDACTL1)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN1 [6]
YMAIN1 [5]
YMAIN1 [4]
YMAIN1 [3]
YMAIN1 [2]
YMAIN1 [1]
YMAIN1 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN1 [0] to YMIAN1 [6] (MLED current settings for brightness 2)
*The current values are the same as those for the MLED current settings.
address : 32h (PTMDACTL2) Automatic Brightness Control Mode Current Setting 2 Register Write
32h (PTMDACTL2)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN2 [6]
YMAIN2 [5]
YMAIN2 [4]
YMAIN2 [3]
YMAIN2 [2]
YMAIN2 [1]
YMAIN2 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN2 [0] to YMIAN2 [6] (MLED current settings for brightness 3)
*The current values are the same as those for the MLED current settings.
No.A1083-54/65
LV5219LG
address : 33h (PTMDACTL3) Automatic Brightness Control Mode Current Setting 3 Register Write
33h (PTMDACTL3)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN3 [6]
YMAIN3 [5]
YMAIN3 [4]
YMAIN3 [3]
YMAIN3 [2]
YMAIN3 [1]
YMAIN3 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN3 [0] to YMIAN3 [6] (MLED current settings for brightness 4)
*The current values are the same as those for the MLED current settings.
address : 34h (PTMDACTL4) Automatic Brightness Control Mode Current Setting 4 Register Write
34h (PTMDACTL4)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN4 [6]
YMAIN4 [5]
YMAIN4 [4]
YMAIN4 [3]
YMAIN4 [2]
YMAIN4 [1]
YMAIN4 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN4 [0] to YMIAN4 [6] (MLED current settings for brightness 5)
*The current values are the same as those for the MLED current settings.
address : 35h (PTMDACTL5) Automatic Brightness Control Mode Current Setting 5 Register Write
35h (PTMDACTL5)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN5 [6]
YMAIN5 [5]
YMAIN5 [4]
YMAIN5 [3]
YMAIN5 [2]
YMAIN5 [1]
YMAIN5 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN5 [0] to YMIAN5 [6] (MLED current settings for brightness 6)
*The current values are the same as those for the MLED current settings.
address : 36h (PTMDACTL6) Automatic Brightness Control Mode Current Setting 6 Register Write
36h (PTMDACTL6)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN6 [6]
YMAIN6 [5]
YMAIN6 [4]
YMAIN6 [3]
YMAIN6 [2]
YMAIN6 [1]
YMAIN6 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN6 [0] to YMIAN6 [6] (MLED current settings for brightness 7)
*The current values are the same as those for the MLED current settings.
address : 37h (PTMDACTL7) Automatic Brightness Control Mode Current Setting 7 Register Write
37h (PTMDACTL7)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN7 [6]
YMAIN7 [5]
YMAIN7 [4]
YMAIN7 [3]
YMAIN7 [2]
YMAIN7 [1]
YMAIN7 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN7 [0] to YMIAN7 [6] (MLED current settings for brightness 8)
*The current values are the same as those for the MLED current settings.
address : 38h (PTMDACTL8) Automatic Brightness Control Mode Current Setting 8 Register Write
38h (PTMDACTL8)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN8 [6]
YMAIN8 [5]
YMAIN8 [4]
YMAIN8 [3]
YMAIN8 [2]
YMAIN8 [1]
YMAIN8 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN8 [0] to YMIAN8 [6] (MLED current settings for brightness 9)
*The current values are the same as those for the MLED current settings.
No.A1083-55/65
LV5219LG
address : 39h (PTMDACTL9) Automatic Brightness Control Mode Current Setting 9 Register Write
39h (PTMDACTL9)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIN9 [6]
YMAIN9 [5]
YMAIN9 [4]
YMAIN9 [3]
YMAIN9 [2]
YMAIN9 [1]
YMAIN9 [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAN9 [0] to YMIAN9 [6] (MLED current settings for brightness 10)
*The current values are the same as those for the MLED current settings.
address : 3Ah (PTMDACTLA) Automatic Brightness Control Mode Current Setting A Register Write
3Ah (PTMDACTLA)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAINA [6]
YMAINA [5]
YMAINA [4]
YMAINA [3]
YMAINA [2]
YMAINA [1]
YMAINA [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIANA [0] to YMIANA [6] (MLED current settings for brightness 11)
*The current values are the same as those for the MLED current settings.
address : 3Bh (PTMDACTLB) Automatic Brightness Control Mode Current Setting B Register Write
3Bh (PTMDACTLB)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAINB [6]
YMAINB [5]
YMAINB [4]
YMAINB [3]
YMAINB [2]
YMAINB [1]
YMAINB [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIANB [0] to YMIANB [6] (MLED current settings for brightness 12)
*The current values are the same as those for the MLED current settings.
address : 3Ch (PTMDACTLC) Automatic Brightness Control Mode Current Setting C Register Write
3Ch (PTMDACTLC)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAINC [6]
YMAINC [5]
YMAINC [4]
YMAINC [3]
YMAINC [2]
YMAINC [1]
YMAINC [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIANC [0] to YMIANC [6] (MLED current settings for brightness 13)
*The current values are the same as those for the MLED current settings.
address : 3Dh (PTMDACTLD) Automatic Brightness Control Mode Current Setting D Register Write
3Dh (PTMDACTLD)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAIND [6]
YMAIND [5]
YMAIND [4]
YMAIND [3]
YMAIND [2]
YMAIND [1]
YMAIND [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIAND [0] to YMIAND [6] (MLED current settings for brightness 14)
*The current values are the same as those for the MLED current settings.
address : 3Eh (PTMDACTLE) Automatic Brightness Control Mode Current Setting E Register Write
3Eh (PTMDACTLE)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAINE [6]
YMAINE [5]
YMAINE [4]
YMAINE [3]
YMAINE [2]
YMAINE [1]
YMAINE [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIANE [0] to YMIANE [6] (MLED current settings for brightness 15)
*The current values are the same as those for the MLED current settings.
No.A1083-56/65
LV5219LG
address : 3Fh (PTMDACTLF) Automatic Brightness Control Mode Current Setting F Register Write
3Fh (PTMDACTLF)
Register name
R/W
D7
D6
D5
D4
D3
D2
D1
D0
-
YMAINF [6]
YMAINF [5]
YMAINF [4]
YMAINF [3]
YMAINF [2]
YMAINF [1]
YMAINF [0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Default
D0 to D6 : YMIANF [0] to YMIANF [6] (MLED current settings for brightness 16)
*The current values are the same as those for the MLED current settings.
address : 40h (PTCTL2) Automatic Brightness Control Mode Setting 2 Register Write
40h (PTCTL2)
Register name
R/W
D7
TUP [3]
W
D6
TUP [2]
W
D5
TUP [1]
W
D4
TUP [0]
W
D3
D2
D1
D0
TDWN [3]
TDWN [2]
TDWN [1]
TDWN [0]
W
0
W
0
W
0
W
0
Default
0
0
0
0
D0 to D3 : TDWNE [0] to TDWN [3] (MLED current, brightness control change time (when decreasing)
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
TDWN
0.256ms
0.512ms
1.024ms
2.048ms
4.096ms
8.192ms
16.384ms
32.768ms
65.536ms
131.072ms
262.144ms
524.288ms
1.049s
*Default
2.097s
4.194s
8.389s
D4 to D7 : TUP [0] to TUP [3] (MLED current, brightness control change time (when increasing)
D7
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D6
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D5
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D4
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
TUP
0.256ms
0.512ms
1.024ms
2.048ms
4.096ms
8.192ms
16.384ms
32.768ms
65.536ms
131.072ms
262.144ms
524.288ms
1.049s
*Default
2.097s
4.194s
8.389s
No.A1083-57/65
LV5219LG
address : 41h (PTCTL3) Automatic Brightness Control Mode Setting 3 Register Write
41h (PTCTL3)
Register name
R/W
D7
D6
TAU [2]
W
D5
TAU [1]
W
D4
TAU [0]
W
D3
D2
TAD [2]
W
D1
TAD [1]
W
D0
TAD [0]
W
-
-
W
0
W
0
Default
0
0
0
0
0
0
D0 to D2 : TAD [0] to TAD [2] (For sensor variation adjustment 1) *MIN setting : Value established when sensor
variation adjustment 2 is set to 0.84V
140 lux
D2
D1
D0
threshold voltage (V)
0
0
0
0.32
0.34
0.37
0.39
0.42
0.44
0.47
0.49
*Default
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
D4 to D6 : TAU [0] to TAU [2] (For sensor variation adjustment 2) * MAX setting
10000 lux
D6
D5
D4
threshold voltage (V)
0
0
0
0.65
0.71
0.78
0.84
0.90
0.97
1.03
1.10
*Default
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
No.A1083-58/65
LV5219LG
address : 42h (GPOCTL) GPO Setting Register Write
42h (GPOCTL)
Register name
R/W
D7
D6
D5
GPO22
W
D4
GPO12
W
D3
GPO02
W
D2
GPO21
W
D1
GPO11
W
D0
GPO01
W
MFXSW
-
W
0
W
0
Default
0
0
0
0
0
0
D0 : GPO01 (GPO0 output setting 1)
0 : Low output *Default
1 : High output
D1 : GPO11 (GPO1 output setting 1)
0 : Low output *Default
1 : High output
D2 : GPO21 (GPO2 output setting 1)
0 : Low output *Default
1 : High output
D3 : GPO02 (GPO0 output setting 2)
0 : OPEN *Default
1 : Buffer output
D4 : GPO12 (GPO1 output setting 2)
0 : OPEN *Default
1 : Buffer output
D5 : GPO22 (GPO2 output setting 2)
0 : OPEN *Default
1 : Buffer output
D7 : MFXSW (Step-up mode settings in which LED pins are set to the same level)
0 : Turns on the step-up mode in which the LED pins are set to the predetermined voltage level when
the voltage at the MLED pins goes down and a mode change from through to step-up occurs.
*Default
1 : Turns on the fixed voltage output mode when the voltage at the MLED pins goes down and a mode
change from through to step-up occurs.
No.A1083-59/65
LV5219LG
Precautions for serial transmission and use
* When the switching regulator is to be started, the LED driver must be turned off.
* When the MLED4, 5 and 6 settings are to be turned on as the main LED drivers, either MLED4, MLED5, and
MLED6 must be turned off after fade out, or they must be set to “always ON.”
* When the SLED2 setting is to be turned on as the SLED driver, either SLED2 must be turned off after fade out, or
it must be set to “always ON.”
* When LED pins are not to be used
When no LED is to be connected to the LED pin, the LED driver pin must be connected to VBAT.
* Thermal shutdown operation
At a high temperature, the thermal shutdown is activated. In this case, all of the LEDs are turned off, and the
voltage stepping-up operation is stopped.
The serial registers are held in the HOLD state. When the temperature goes down to the normal level, the IC self -
restores.
However, the IC will not self-restore if the short-circuit prevention circuit (SCP) is activated when DC/DC circuit
is turned off.
* IN pin H limit operation
When the IN pin becomes approximately 0.6V higher than the DC/DC set voltage, the H limit operation is
triggered.
H limit operation causes DC/DC circuit to stop the voltage stepping-up operation, but when the voltage falls to the
normal level, the the IC self-restores.
The H limit voltage becomes approximately 0.6V higher than the fixed mode set voltage and varies when the set
voltage changes. When the set voltage is 4.3V, the H limit voltage will be approximately 4.9V, and when the set
voltage is approximately 5.0V, the H limit voltage will be approximately 5.6V.
H limit operation is also effective in a mode in which the LED pin voltage is made constant, so in this mode as well
a fixed mode output voltage must be set in consideration of the H limit voltage.
* RESET serial communication
The RESET pin must be cleared (L→H) after VBAT is started.
V
and V D2 are unrelated to the RESET function.
DD
DD
Serial communication does not take place until V
is started after RESET is released, When voltage V
does
DD
DD
not exist, no communication can be carried out and RESET is not triggered, either.
The registers hold their state.
* Regarding the switching regulator short-circuit protection circuit (SCP)
When the switching regulator output falls, it is assumed that a short circuit has occurred, and the SCP is activated
to prevent an excessively large current from flowing. When the IN pin voltage falls by about 30mV from the no-
load output value, an internal timer operates. If the reduced voltage condition continues for 10msec, the
LV5219LG will judge that a short circuit has occurred, and stop the switching regulator control circuit.
After the switching regulator control circuit has stopped, it does not self-restore. However, it can be reset by either
applying a RESET, or sending a command to set the serial control RGSW to 0.
In a mode in which the LED pin voltage is made constant, the same operation takes place when the MLED pin
voltage falls by 60mV, and the SCP is activated. As in the case of the constant voltage mode, a self-restore does
not take place, and the resetting method is also the same.
No.A1083-60/65
LV5219LG
Serial map
Data
Register
Address
Description
R/W
W
name
D7
D6
D5
D4
D3
MSW1
W
D2
D1
D0
MLED6
MLED5
MLED4
MSW2
FXSW
RGSW
STBY
LED Settings 1
Register
00h
LEDCTL1
W
W
W
W
W
W
W
0
0
0
0
0
0
0
MISW
W
0
SPM6
SPM5
SPM4
SPS2
S2SW
W
S1SW
VOCSW
LED Settings 2
Register
01h
02h
03h
04h
05h
LEDCTL2
LEDCTL3
W
W
W
W
W
W
W
W
W
W
W
0
0
0
0
0
0
0
0
R1SW
W
SCSW2
B2SW
G2SW
R2SW
SCSW1
B1SW
G1SW
W
LED Settings 3
Register
W
W
W
W
W
W
0
MFSW
W
0
0
KESW3
W
0
KESW2
W
0
KESW1
W
0
0
0
KESW4
F3SW
F2SW
W
F1SW
W
LED Settings 4
Register
LEDCTL4
W
W
0
0
0
0
0
0
0
0
MAINL [2 : 0]
MAINH [4 : 0]
MLED Current
MLEDDACCTL
M4DACTL
W
0
W
W
0
W
0
W
0
W
W
0
W
0
Setting Register
0
0
-
-
-
M4C [4 : 0]
MLED4 Current
Setting Register
W
0
W
W
0
W
0
W
0
W
W
0
W
0
0
0
-
-
-
M5C [4 : 0]
MLED5 Current
Setting Register
06h
07h
08h
09h
0Ah
0Bh
0Ch
0Dh
0Eh
0Fh
M5DACTL
M6_VD_DACTL
S1DACTL
S2DACTL
R1DACTL
G1DACTL
B1DACTL
R2DACTL
G2DACTL
B2DACTL
W
W
W
W
W
W
W
W
W
W
W
0
W
W
0
W
0
W
0
W
W
0
W
0
0
0
VD [2 : 0]
MC6 [4 : 0]
MLED6 Current
Output Setting
Register
W
0
W
0
W
0
W
0
W
0
W
W
0
W
0
0
-
-
-
S1C [4 : 0]
SLED1 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
-
-
-
S2C [4 : 0]
SLED2 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
MAXC1 [2 : 0]
R1C [4 : 0]
RLED1 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
-
-
-
G1C [4 : 0]
GLED1 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
-
-
-
B1C [4 : 0]
BLED1 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
MAXC2 [2 : 0]
R2C [4 : 0]
RLED2 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
W
0
W
0
0
-
-
-
G2C [4 : 0]
GLED2 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
-
-
-
B2C [4 : 0]
BLED2 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Upper column : Register name, Middle column : Read/Write, Lower column : Default value
Continued on next page.
No.A1083-61/65
LV5219LG
Continued from preceding page.
Data
Register
Address
Description
R/W
W
name
D7
D6
D5
D4
D3
D2
D1
D0
MAXCF [2 : 0]
F1C [4 : 0]
FLED1 Current
Setting Register
10h
11h
12h
F1DACTL
F2DACTL
F3DACTL
W
0
W
0
W
0
W
0
W
0
W
W
0
W
0
0
-
-
-
F2C [4 : 0]
FLED2 Current
Setting Register
W
W
W
0
W
0
W
0
W
0
W
0
W
W
0
W
0
0
-
-
-
F3C [4 : 0]
FLED3 Current
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
W
0
0
-
-
MFOUT [2 : 0]
MFIN [2 : 0]
MLED Fade
Time
13h
14h
15h
16h
17h
18h
19h
1Ah
1Bh
1Ch
1Dh
1Eh
1Fh
MFCTL
SFCTL
W
W
W
W
W
W
W
W
W
W
W
W
W
W
0
W
0
W
0
W
W
0
W
0
W
W
0
Setting Register
0
0
-
-
SFOUT [2 : 0]
SFIN [2 :0]
SLED Fade
Time
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
-
-
R1FOUT [2 : 0]
R1FIN [2 : 0]
RLED1 Fade
Time
R1FCTL
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
-
-
G1FOUT [2 : 0]
G1FIN [2 : 0]
GLED1 Fade
Time
G1FCTL
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
-
-
B1FOUT [2 : 0]
B1FIN [2 : 0]
BLED1 Fade
Time
B1FCTL
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
GHB1
GHG1
GHR1
GR1M1
GRON1
AT1 [2 : 0]
RGB1 Gradation
Setting Register
RGB1GRCTL
RGB1PUCTL
R1AOFFCTL
R1AONCTL
G1AOFFCTL
G1AONCTL
B1AOFFCTL
B1AONCTL
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
-
W
0
PRON1
PT1 [2 : 0]
HO1 [2 : 0]
RGB1 Pulse Mode
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
-
-
R1Aoff [5 : 0]
RLED1 OFF
Position
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
-
-
R1Aon [5 : 0]
RLED1 ON
Position
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
-
-
G1Aoff [5 : 0]
GLED1 OFF
Position
W
0
W
0
W
0
W
0
W
0
W
W
0
W
0
Setting Register
0
-
-
G1Aon [5 : 0]
GLED1 ON
Position
W
0
W
0
W
0
W
0
W
W
W
0
W
0
Setting Register
0
0
-
-
B1Aoff [5 : 0]
BLED1 OFF
Position
W
0
W
0
W
0
W
0
W
W
W
0
W
0
Setting Register
0
0
-
-
B1Aon [5 : 0]
BLED1 ON Position
Setting Register
W
0
W
0
W
0
W
0
W
W
W
0
W
0
0
0
Upper column : Register name, Middle column : Read/Write, Lower column : Default value
Continued on next page.
No.A1083-62/65
LV5219LG
Continued from preceding page.
Data
Register
Address
Description
R/W
W
name
D7
-
D6
-
D5
D4
D3
D2
D1
D0
R2FOUT [2 : 0]
R2FIN [2 : 0]
RLED2 Fade
Time
20h
21h
22h
R2FCTL
G2FCTL
B2FCTL
W
0
W
0
W
0
W
W
0
W
0
W
W
0
Setting Register
0
0
-
-
G2FOUT [2 : 0]
G2FIN [2 : 0]
GLED2 Fade
Time
W
W
W
0
W
0
W
0
W
W
0
W
0
W
W
0
Setting Register
0
0
-
-
B2FOUT [2 : 0]
B2FIN [2 : 0]
BLED2 Fade
Time
W
0
W
0
W
0
W
W
W
0
W
W
0
Setting Register
0
0
0
GHB2
GHG2
GHR2
W
GR1M2
GRON2
AT2 [2 : 0]
RGB2 Gradation
Setting Register
23h
24h
25h
26h
27h
28h
29h
2Ah
2Bh
2Ch
2Dh
2Eh
2Fh
RGB2GRCTL
RGB2PUCTL
R2AOFFCTL
R2AONCTL
G2AOFFCTL
G2AONCTL
B2AOFFCTL
B2AONCTL
KEYCTL
W
W
W
W
W
W
W
W
W
W
W
R
W
0
W
W
W
0
W
0
W
W
0
0
PRON2
W
0
0
0
-
PT2[2:0]
HO2[2:0]
RGB2 Pulse Mode
Setting Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
0
-
-
R2Aoff [5 : 0]
RLED2 OFF
Position
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
-
-
R2Aon [5 : 0]
RLED2 ON
Position
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
-
-
G2Aoff [5 : 0]
GLED2 OFF
Position
W
0
W
0
W
0
W
0
W
0
W
W
0
W
0
Setting Register
0
-
-
G2Aon [5 : 0]
GLED2 ON
Position
W
0
W
0
W
0
W
0
W
W
W
0
W
0
Setting Register
0
0
-
W
0
-
W
0
B2Aoff [5 : 0]
BLED2 OFF
Position
W
0
W
0
W
W
W
0
W
0
Setting Register
0
0
-
-
B2Aon [5 : 0]
BLED2 ON Position
Setting Register
W
0
W
0
W
0
W
0
W
W
W
0
W
0
0
0
KLED1, KLED2
Changeover
Voltage
KEY2C [3 : 0]
KEY1C [3 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
Automatic
Brightness Control
Mode Settings 1
Register
SWCTL
PTSW
KISW
W
SMPN [1 : 0]
SMPF [2 : 0]
PTCLT1
W
0
W
0
W
0
W
0
W
0
W
0
W
0
0
INTCR
-
INTM6
INTM5
INTM4
INTM3
INTM2
INTM1
INT Mask
INTMASK
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Setting Register
-
-
INT6
R
INT5
R
INT4
R
INT3
R
INT2
R
INT1
R
INT Detection
Register
INTDET
R
0
R
0
0
0
0
0
0
0
XM [3 : 0]
-
-
KEYON
DCDC
Status
STATUS
R
R
0
R
0
R
0
R
0
R
0
R
0
R
0
R
0
Detection Register
Upper column : Register name, Middle column : Read/Write, Lower column : Default value
Continued on next page.
No.A1083-63/65
LV5219LG
Continued from preceding page.
Data
Register
Address
Description
R/W
W
name
D7
-
D6
D5
D4
D3
D2
D1
D0
Automatic
Brightness Control
Mode Settings
YMAIN0 [6 : 0]
30h
31h
32h
PTMDACTL0
PTMDACTL1
PTMDACTL2
W
0
W
0
W
0
W
0
W
W
0
W
0
W
0
Current Settings 0
0
Automatic
Brightness Control
Mode Settings
-
YMAIN1 [6 : 0]
W
W
W
0
W
0
W
0
W
0
W
W
0
W
0
W
0
Current Settings 1
0
Automatic
Brightness Control
Mode Settings
-
YMAIN2 [6 : 0]
W
0
W
0
W
0
W
0
W
W
0
W
0
W
0
Current Settings 2
0
Automatic
-
YMAIN3 [6 : 0]
Brightness Control
Mode Settings
Current Settings 3
33h
34h
35h
36h
37h
38h
39h
3Ah
3Bh
3Ch
3Dh
3Eh
3Fh
PTMDACTL3
PTMDACTL4
PTMDACTL5
PTMDACTL6
PTMDACTL7
PTMDACTL8
PTMDACTL9
PTMDACTLA
PTMDACTLB
PTMDACTLC
PTMDACTLD
PTMDACTLE
PTMDACTLF
W
W
W
W
W
W
W
W
W
W
W
W
W
W
0
W
0
W
0
W
0
W
W
0
W
0
W
0
0
Automatic
Brightness Control
Mode Settings
-
YMAIN4 [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings 4
Automatic
Brightness Control
Mode Settings
-
YMAIN5 [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings 5
Automatic
Brightness Control
Mode Settings
-
YMAIN6 [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings 6
Automatic
Brightness Control
Mode Settings
-
YMAIN7 [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings 7
Automatic
Brightness Control
Mode Settings
-
YMAIN8 [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings 8
Automatic
Brightness Control
Mode Settings
-
W
0
YMAIN9 [6 : 0]
W
0
W
0
W
0
W
W
0
W
0
W
0
Current Settings 9
0
Automatic
Brightness Control
Mode Settings
-
YMAINA [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings A
Automatic
Brightness Control
Mode Settings
-
YMAINB [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings B
Automatic
Brightness Control
Mode Settings
-
YMAINC [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings C
Automatic
Brightness Control
Mode Settings
-
YMAIND [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings D
Automatic
Brightness Control
Mode Settings
-
YMAINE [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings E
Automatic
Brightness Control
Mode Settings
-
YMAINE [6 : 0]
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Current Settings F
Upper column : Register name, Middle column : Read/Write, Lower column : Default value
Continued on next page.
No.A1083-64/65
LV5219LG
Continued from preceding page.
Data
Register
Address
Contents
R/W
W
name
D7
D6
D5
D4
D3
D2
D1
D0
Automatic
Brightness Control
Mode Settings 2
Register
TUP [3 : 0]
TDWN [3 : 0]
40h
PTCLT2
W
0
W
W
W
0
W
0
W
0
W
W
0
0
0
0
Automatic
Brightness Control
Mode Settings 3
Register
-
TAU [2 : 0]
-
TAD [2 : 0]
41h
42h
43h
PTCLT3
GPOCTL
TEST
W
W
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
MFXSW
-
GPO22
GPO12
GPO02
GPO21
GPO11
GPO01
GPO Register
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
-
-
-
-
-
-
-
-
For Testing
Inhibited
W
0
W
0
W
0
W
0
W
0
W
0
W
0
W
0
Upper column : Register name, Middle column : Read/Write, Lower column : Default value
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitabilityof its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.A1083-65/65
相关型号:
©2020 ICPDF网 联系我们和版权申明