PCFFS15120AF [ONSEMI]
SiC 二极管，1200V，15A，裸片;
| 型号： | PCFFS15120AF |
| 厂家： | 
ONSEMI |
| 描述： | SiC 二极管，1200V，15A，裸片 二极管 |
| 文件： | 总3页 (文件大小：214K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DIE DATA SHEET
www.onsemi.com
Silicon Carbide (SiC)
Schottky Diode – EliteSiC,
15 A, 1200 V, D1, Die
Anode
PCFFS15120AF
Description
Silicon Carbide (SiC) Schottky Diode has no switching loss,
provides improved system efficiency against Si diodes by utilizing
new semiconductor material − Silicon Carbide, enables higher
operating frequency, and helps increasing power density
and reduction of system size/cost. Its high reliability ensures robust
operation during surge or over−voltage conditions.
DIE LAYOUT
(Dimension: mm, Except Scribe Lane)
2650
Features
• Max Junction Temperature 175°C
• Avalanche Rated 145 mJ
• High Surge Current Capacity
• Positive Temperature Coefficient
• Ease of Paralleling
• No Reverse Recovery / No Forward Recovery
Applications
• General Purpose
• SMPS, Solar Inverter, UPS
• Power Switching Circuits
Passivation Information
• Passivation Material: Polymide (PSPI)
• Passivation Type: Local Passivation
• Passivation Thickness: 90KA
Die Information
• Wafer Diameter: 6 inch
• Die Size: 2,730 × 2,730 mm (Include Scribe Lane)
CROSS SECTION
• Metallization
♦ Top: Ti / TiN / AI 4 mm
♦ Back: Ti/ NiV / Ag
• Die Thickness: Typ. 200 mm
• Bonding Pad Size
♦ Anode: 2150 × 2150 mm
• Recommended Wire Bond (Note 1)
♦ Anode: 15 mil × 1
NOTE:
1. Based on TO−247 package of onsemi
ORDERING INFORMATION
Part Number
Die Size
Package
2,730 × 2,730 mm
N/A
PCFFS15120AF
(Include Scribe Lane)
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
February, 2023 − Rev. 2
PCFFS15120AF/D
PCFFS15120AF
ELECTRICAL CHARACTERISTICS ON WAFER (T = 25°C unless otherwise noted)
C
Symbol
Parameter
Reverse Blocking Voltage
Forward Voltage
Test Condition
I = 200 mA, T = 25°C
R
Min
1230
1.22
−
Typ
−
Max
−
Unit
V
V
R
C
V
F
I = 15 A, T = 25°C
−
1.723
200
V
F
C
I
R
Reverse Current
V
R
= 1230 V, T = 25°C
−
mA
C
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Tested 100% on wafer
3. −F: sawn−on−film frame packing based on wafer tested
For Additional Product Information and Electrical Characteristics on Package
Refer to the FFSH30120ADN−F155 product datasheet.
The Configuration of Chips (Based on 6 Inch Wafer)
chip
chip
Scribe Lane
80.0 mm
PSPI Passivation Line
chip
chip
Figure 1. The Configuration of Chips (Based on 6 Inch Wafer)
www.onsemi.com
2
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号：
©2020 ICPDF网 联系我们和版权申明