SI4826-DEMO [SILICON]
Si4822/26 DEMO BOARD USERS GUIDE;型号: | SI4826-DEMO |
厂家: | SILICON |
描述: | Si4822/26 DEMO BOARD USERS GUIDE |
文件: | 总18页 (文件大小:1827K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Si4822/26-DEMO
Si4822/26 DEMO BOARD USER’S GUIDE
1. Features
ATDD (analog tune and digital display) FM/AM/SW radio
Worldwide FM band support from 64 to 109 MHz with 5 default sub-bands:
FM1 87–108 MHz (Demo Board Default)
FM2 86.5–109 MHz
FM3 87.3–108.25 MHz
FM4 76–90 MHz
FM5 64–87 MHz (Demo Board Default)
Worldwide AM band support from 504 to 1750 kHz with 5 default sub-bands:
AM1 520–1710 kHz (Demo Board Default)
AM2 522–1620 kHz (Demo Board Default)
AM3 504–1665 kHz
AM4 520–1730 kHz
AM5 510–1750 kHz
Worldwide SW band support from 2.3 to 28.5 MHz with 16 default sub-bands:
SW1 5.6–6.4 MHz (Demo Board Default, for Si4826 only)
SW2 5.95–6.2 MHz
SW3 6.8–7.6 MHz (Demo Board Default, for Si4826 only)
SW4 7.1–7.6 MHz
SW5 9.2–10 MHz (Demo Board Default, for Si4826 only)
SW6 9.2–9.9 MHz
SW7 11.45–12.25 MHz (Demo Board Default, for Si4826 only)
SW8 11.6–12.2 MHz
SW9 13.4–14.2 MHz (Demo Board Default, for Si4826 only)
SW10 13.57–13.87 MHz
SW11 15–15.9 MHz (Demo Board Default, for Si4826 only)
SW12 15.1–15.8 MHz
SW13 17.1–18 MHz (Demo Board Default, for Si4826 only)
SW14 17.48–17.9 MHz
SW15 21.2–22 MHz (Demo Board Default, for Si4826 only)
SW16 21.45–21.85 MHz
Twelve positions band switch or one push button for selecting different band according to the target
application.
Two AAA battery operations with working voltage down to 2.0 V
Economical potentiometer for frequency tuning replaces more expensive variable capacitor (PVC)
Potentiometer and/or push button volume control
FM 50 µs or 75 µs (default) de-emphasis
9-level Bass/Treble via push button control for FM
7-level Bass/Treble via push button control for AM/SW
FM/AM/SW band indicator and frequency display in LCD
2×4 matrix keypad interface
The frequency range of each band, de-emphasis and AM channel space can be re-configured by host
MCU.
Rev. 0.1 11/11
Copyright © 2016 by Silicon Laboratories
Si4822/26-DEMO
Si4822/26-DEMO
2. Overview
This manual describes the operation of the Silicon Labs Si4822/26-DEMO Board Rev1.0, October 24, 2011. The
Silicon Laboratories Si4822/26-DEMO Board is designed with the 24-pin SSOP-packaged Si4822/26 chip, the
revolutionary single chip AM/FM/SW receiver that integrates everything from antenna input to audio output and
allows use of common and economical potentiometers to do the frequency tuning. It provides a complete portable
analog tune digital display AM/FM/SW radio design. The LCD displays the tuning information. The Si4822/26-
DEMO is designed with 1-layer PCB, allowing the lowest cost without sacrificing the RF performance. The demo
board works with two AAA batteries and working voltage down to 2.0 V.
2
Rev. 0.1
Si4822/26-DEMO
3. Description
Figure 1 and Figure 2 shows the physical layout of the board with key components indicated.
Figure 1. Si4822/26-DEMO Board Top Side in Time Mode
Figure 2. Si4822/26-DEMO Board Bottom Side
Rev. 0.1
3
Si4822/26-DEMO
Power:
BAT1: 2 cells AAA battery compartment
Audio Connectors:
J5: Stereo audio headphone output
Antenna Selections:
AM antenna: Ferrite stick antenna for AM
J6: SMA connector for AM conductive testing
S11: AM antenna selector
1-2: SMA for AM Conductive Test
2-3: AM Ferrite Antenna
1
3
2
J1: BNC connector for FM/ SW conductive testing or FM whip antenna
S12: FM antenna selector
1
1-2: BNC (J1)
2
3
2-3: HP ANT (J5)
Radio Band Selection:
The demo board provides two methods for selecting the radio band: one is to use the slide switch S2, another is to
use the POWER/BAND button. S14 determines which method is in use.
S14:
1
1-2: Use slide switch to select band
2
3
2-3: Use push button to select band
4
Rev. 0.1
Si4822/26-DEMO
Radio Band Property Setting:
S13:
1
1-2: Use the keypad to set the band propery via MCU
2-3: Use the tuner default band setting values
2
3
Audio Output Test Point:
For the general specification test, TP3 is the recommended audio signal test point. The audio test instrument
should be connected to TP3 to get more accurate test results. J5 can also be used as an audio test point, but the
test results may not be entirely accurate under some circumstances.
1
2
GND
AOUT
Main Components:
U1: Silicon Laboratories Si4822/26 AM/FM/SW ATDD receiver
U2: Audio amplifier
U3: MCU
LCD: The digital display of tuning frequency
Rev. 0.1
5
Si4822/26-DEMO
Control Interface:
VR1: Frequency tuning wheel
VR2: Volume control wheel
S3~S8, S10: The keypad
S2: Band slide switch for FM, AM, and SW
7
8
9
1
3
4
5
6
10 11 12
2
Band definition:
1: FM1 (87–108 MHz), De-emphasis = 75 µs
2: FM5 (64–87 MHz), De-emphasis = 75 µs
3: AM1 (520–1710 kHz), 10 kHz spacing
4: AM2 (522–1620 kHz), 9 kHz spacing
5: SW1 (5.6–6.4 MHz)
6: SW3 (6.8–7.6 MHz)
7: SW5 (9.2–10.0 MHz)
8: SW7 (11.45–12.25 MHz)
9: SW9 (13.4–14.2 MHz)
10: SW11 (15–15.9 MHz)
11: SW13 (17.1–18 MHz)
12: SW15 (21.2– 22 MHz)
Human Interface:
There are seven keys for controlling the demo board as shown below:
DE/SPC
TREBLE/AL
SETTING
BASS/TMR
UP/VOL+
POWER/BAND
DOWN/VOL-
Each key can have a different function under each operating condition:
Time mode: Radio function is disabled. LCD displays time. Buttons can be used to set time, alarm, etc.
FM/AM/SW Radio mode: Tuner IC works in Power Up mode. Radio function is enabled. LCD displays the
radio station parameters. Buttons are used to adjust radio settings.
The functions of the buttons are summarized in Table 1. The FM/AM/SW radio parameters that can be configured
are listed in Table 2.
6
Rev. 0.1
Si4822/26-DEMO
Table 1. Key Function Description
Button/Mode
Time Mode
Tuner Off
FM/AM/SW Radio Mode
Tuner On
POWER/BAND
hold Time
< 1s
None
Change between FM, AM, and SW (1 FM
band, 1 AM band and 8 SW bands)
hold Time
> 1s
Enable radio
Disable radio function and enter Time mode
(Radio parameters will be saved to MCU).
DE/SPC
None
FM mode: Change De-emphasis, between
50 µs and 75 µs.
AM mode: Change channel space, between
9 kHz and 10 kHz.
BASS/TMR
TREBLE/AL
Enter or quit time setting menu. Decrease Bass/Treble level by 1 step.
Enable or disable the alarm
function; enter or quit alarm
setting menu.
Increase Bass/treble level by 1 step.
UP/VOL+
DOWN/VOL-
SETTING
hold Time < In setting menu, change the
In radio setting menu, change the current
parameter by one unit per each press.
In radio working mode, increase volume 1
step per each press.
1s
current time/alarm parameter
by one unit per each press.
hold Time
> 1s
In setting menu, change the
current time/alarm parameter
automatically.
In radio setting menu, change the current
parameter automatically.
In radio working mode, increase volume
level automatically until to maximum.
hold Time < In setting menu, change the
In radio setting menu, change the current
parameter by one unit per each press.
In radio working mode, decrease volume 1
step per each press.
1s
current time/alarm parameter
by one unit per each press.
hold Time
> 1s
In setting menu, change the
current time/alarm parameter
automatically.
In radio setting menu, change the current
parameter automatically.
In radio working mode, decrease volume
level automatically until to minimum.
hold Time < None
1s
In radio setting menu, change the selected
item per each press.
hold Time
> 1s
None
Quickly return to FM working mode.
Rev. 0.1
7
Si4822/26-DEMO
Table 2. Radio Configuration Parameters
FM Parameter
Bass/Treble: 0-8
AM Parameter
SW Parameter
Bass/Treble: 1-7
Default: 3
Bass/Treble: 1-7
Default: 3
Default: 4
Digital volume: 0-63
Default: 63
Digital volume: 0-63
Default: 63
Digital volume: 0-63
Default: 63
Band top: max 109 MHz
Default: 108 MHz
Band top: max 1750 kHz
Default: 1710 kHz
Band top: max 28.5 MHz
Default: 6.4/7.6/10/12.25/14.2/15.9/18/22 MHz
for SW1 to SW8 respectively
Band bottom: min 64 MHz
Default: 87.5 MHz
Band bottom: min 504 kHz
Default: 522 kHz
Band bottom: min 2.3 MHz
Default: 5.6/6.8/9.2/11.45/13.4/15/17.121.2 MHz
for SW1 to SW8 respectively
Band range: max 22 MHz
Band range: max 2.2 MHz
Band range: max 1.1 MHz
De-emphasis: 50 or 75 µs
Default: 75 µs
Channel space: 9 or 10 kHz
Default: 9 kHz
Tone/VOL mode: a-d
Default: d
Tuning preference: a-d
Default: b
Notes:
Tone/VOL mode has four selections:
Bass/treble mode: no digital volume control, fixed volume level at 59
Digital volume mode: no bass/treble effect, volume levels from 0 to 63
Mixed mode 1: bass/treble and digital volume coexist, volume levels from 0 to 63, scale to 0~59
Mixed mode 2: bass/treble and digital volume coexist, volume levels from 0 to 63
The Tuning preference of FM has two selections:
Preference1: When tuning to adjacent channels, the volume level decreases by 2 dB
Preference2: When tuning to adjacent channels, the volume level remains unchanged
The Tuning preference of SW has two selections:
Preference1: When tuning to adjacent channels, the volume level decreases by 2 dB
Preference2: When tuning to adjacent channels, the volume level remains unchanged
There is no tuning preference selection for AM mode.
8
Rev. 0.1
Si4822/26-DEMO
4. Operation
The Si4822/26-DEMO board, a complete analog tune and digital display radio, provides two major modes of
operation: Time mode and FM/AM/SW Radio mode.
4.1. Time Mode
Place two AAA batteries into the battery compartment. The board will automatically enter Time mode and display
the time.
The demo board display in Time mode is illustrated in Figure 1.
4.1.1. Time Setting
The time default value is 00:00 and can be set to the correct time manually when needed.
1. In Time mode, press the BASS/TMR button to enter the setting menu. The default is to set the minute item
first. Press this button again to select the hour item. The selected item flashes.
2. While the selected item is flashing, press the DOWN/VOL- and UP/VOL+ button to set the desired time.
3. When you have finished setting the time, press BASS/TMR button to quit the setting menu. The MCU will
automatically quit the setting menu if there is no operation within 2 seconds.
4.1.2. Alarm Setting
1. In Time mode, press the TREBLE/AL button to enable or disable the alarm function and to enter the setting
menu automatically when the alarm is enabled. Once you have entered the setting menu, the default is to
set the minute item first. Pressing this button again will select the hour item. The selected item flashes.
2. While the selected item is flashing, press the DOWN/VOL- and UP/VOL+ button to set the desired time.
3. When you have finished the alarm setting, press TREBLE/AL button to quit the set menu. The MCU will
automatically quit the setting menu if there is no operation within 2 seconds.
4. If the alarm is enabled and the alarm setting time is matched, the radio will be automatically turned on after
the buzzer sounds for 5 seconds.
5. The radio will be turned off and the demo board will go into sleep mode automatically if there is no
operation on the push buttons within 15 minutes; if there is any operation on the push buttons, the auto-
sleep function will be disabled. The radio keeps working throughout this time.
Rev. 0.1
9
Si4822/26-DEMO
4.2. FM/AM/SW Radio Mode
In time mode, the device will enter FM/AM/SW mode after a long press (hold time > 1s) of the POWER/BAND
button or when the alarm time is reached. The LCD displays the following information: band indicator, band
frequency indicator, and sleep indicator in case the radio is automatically turned on by the alarm.
The demo board display in FM/AM/SW mode is illustrated in Figure 3.
Figure 3. LCD Display in FM Radio Mode
The demo board provides two methods to select the radio band: one is to use the slide switch (S2), the other is to
use the POWER/BAND push button. S14 determines which method is in use.
The demo board also provides two methods to set the band property: one is to use tuner default values, the other
is to use the keypad to reconfigure band property value via the MCU. S13 determines which method is in use. If
you use the tuner default values, the band property is fixed and cannot be re-configured. Refer to Section "4.2.1.
MCU Setting Band Property” for the operation details for setting the band property using the keypad.
To operate the demo board, follow these procedures:
1. According to the desired radio band selection method, set S14 to use the slide switch or push button.
2. According to the desired radio band property, set S13 to use tuner default values or reconfigure the band
property.
3. Hold the POWER/BAND push button (hold time > 1s) or when the alarm time is reached, the device will
enter FM/AM/SW mode.
4. Use slide switch S2 or press the POWER/BAND push button to select the desired band.
5. Refer to section "4.2.1. MCU Setting Band Property” or section "4.2.2. MCU Setting Radio Working Mode”
to reconfigure the band property or radio working mode if necessary.
6. Rotate the tuning wheel and find the desired radio station with the help of the LCD display and/or tuning
indicator D1.
7. Rotate the volume control wheel VR2 and/or press the DOWN/VOL- or UP/VOL+ button to get a
comfortable volume. Press the BASS/TMR or TREBLE/AL button to get the desired bass/treble level.
Notes:
For FM listening, the earphone cable must be connected to the board when S12 is set to HP ANT or an
external antenna must be connected to the BNC connector when S12 is set to BNC.
For AM listening, the ferrite antenna must be connected to the board and the S11 is set to Ferrite before
turning on the radio or switching the band to AM.
10
Rev. 0.1
Si4822/26-DEMO
4.2.1. MCU Setting Band Property
The demo board provides the function that the band property can be set by the MCU. The band property includes:
Band top
Band bottom
De-emphasis (only for FM)
Channel Space (only for AM)
The setting menu is illustrated in Figure 4.
To set the band properties, follow these steps:
1. Press the SETTING button to enter the setting menu and select the item to be set. The selected item
flashes for 1 second, then automatically switches to its current value.
2. While the value is flashing, press the DOWN/VOL- or UP/VOL+ button to set the desired value within 3
seconds.
3. Repeat step 1 and 2 to finish setting the band properties.
4. When the band properties are set, the MCU automatically quits setting menu if there is no operation within
3 seconds.
5. In FM working mode, press the DE/SPC button to set the De-emphasis 50 µs or 75 µs.
6. In AM working mode, press the DE/SPC button to set the Channel Space 9 kHz or 10 kHz.
SETTING M ENU:
1 BAND TOP
2 BAND BOTTOM
3 TONE/VOL M ODE
4 Tuning preference
a Bass/Treble M ODE
b Dig-Vol M ODE
c M IX M ODE1
d M IX M ODE2
a preference1
b preference2
Figure 4. Setting Menu
Rev. 0.1
11
Si4822/26-DEMO
4.2.2. MCU Setting Radio Working Mode
The host MCU can set the radio working mode. The working mode includes:
Tone/volume mode (only for FM mode), item 3 in setting menu
Tuning preference (only for FM and SW), item 4 in setting menu
To set radio working mode, follow these steps:
1. Press the SETTING button to enter the item 3. The LCD displays the item number st3 for 1 second, then
automatically switches to its mode indication.
2. Press the DOWN/VOL- or UP/VOL+ button to select the desired mode within 3 seconds.
3. Repeat step 1 and 2 to set the tuning preference by setting the item 4.
4. When the radio working mode is set, the MCU automatically quits the setting menu if there is no operation
within 3 seconds.
12
Rev. 0.1
Si4822/26-DEMO
5. Bill of Materials
ATDD AM/FM/SW receiver IC Si4822/26 with external 32.768 kHz crystal oscillator support
LM4910MA Audio amplifier IC
TM8795 MCU
See Table 3 for details
Table 3. Si4822/26-DEMO Board Bill of Materials Rev 1.0
Item Qty
Reference
Description
Value
0.1 µ
0.47 µ
100 p
10 p
1
12 C1-2 C6 C19 C24 C37-42 C44 CAP,SM,0603,X7R
2
2
2
1
4
1
2
1
1
2
1
1
2
2
1
2
1
1
1
2
1
1
2
2
1
1
1
1
1
1
1
C5 C36
C8 10
C33
CAP,SM,0603,X7R
CAP,SM,0603,COG
CAP,SM,0603,COG
CAP,SM,0603,COG
CAP,SM,0603,X7R
CAP,SM,0603,X7R
CAP,SM,0603,COG
CAP,SM,0603,X7R
CAP,SM,0603,X7R
CAP,SM,1210,X7R
CAP,SM,0603,X7R
CAP,SM,1210,X7R
Electrolytic capacitor
Electrolytic capacitor
RES,SM,0603
3
4
5
C28-29 C32 C35
C11
22 p
6
330 p
33 n
7
C30-31
C34
8
33 p
9
C15
4.7 µ
10 µ
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
C4 C12
C13
47 µ
C18
820 p
220 µ
100 µ/4 V
220 µ/4 V
2 k
C23 C27
C14 C25
C3
R5-6
R27
RES,SM,0603
100 R
100 k
10 R
R34
RES,SM,0603
R32
RES,SM,0603
R3 R42
R41
RES,SM,0603
10 k
RES,SM,0603
120 k
12 k
R22
RES,SM,0603
R1-2
RES,SM,0603
1 M
R4 R31
R24
RES,SM,0603
1 k
RES,SM,0603
200 R
22 R
R13
RES,SM,0603
R16
RES,SM,0603
2.2 k
R20
RES,SM,0603
6.8 k
R21
RES,SM,0603
NP
R7
RES,SM,0603,Tolerance ±1%
RES,SM,0603,Tolerance ±1%
10 k 1%
160 k 1%
R29
Rev. 0.1
13
Si4822/26-DEMO
Table 3. Si4822/26-DEMO Board Bill of Materials Rev 1.0 (Continued)
Item Qty
Reference
Description
RES,SM,0603,Tolerance ±1%
RES,SM,0603,Tolerance ±1%
RES,SM,0603,Tolerance ±1%
RES,SM,0603,Tolerance ±1%
RES,SM,0603,Tolerance ±1%
SI4822/26 SSOP24
Value
20 k 1%
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
9
1
1
1
1
1
1
1
1
1
1
2
3
1
1
2
1
1
1
1
1
1
1
1
1
1
1
4
1
8
1
1
R9-12 R14-15 R28 R33 R35
R43
R36
R8
30 k 1%
33 k 1%
40 k 1%
R44
U1
47 k 1%
Si4822/26
LM4910MA
TM8795 44 PIN
2N3904
U2
LM4910MA,SO8
U3
TM8795 44 PIN
Q2
TRANSISTOR NPN SOT23
TRANSISTOR NPN SOT23
TRANSISTOR NPN SOT23
DIODE,SM,ESD,SOT23
FERRITE BEAD,SM,0603
FERRITE BEAD,SM,0603
BUZZER
Q1
2SC9018
2N3906
Q3
D2 D4
B4 B5 B6
B1
BAV99
2.5 k/100 M
NP
BZ1
Y1-2
D1
BUZZER
32.768 kHz
LED
CRYSTAL
LED
D6
1N4148
1N4148
J5
Stereo earphone jack with switch
RES,SM,0603
3.5 mm
L1
0R
L3
IND,SM,0603
120 nH
TP3
LCD1
J1
CONN,TH,1x2,HDR
CONN,TH,1x2,HDR
LCD
LCD
BNC VERTICAL
BNC for FM testing
SMA for AM testing
220 µH
J6
SMA VERTICAL
ANT1
BAT1
S11-14
S2
AW ferrite stick antenna
BATTERY BOX ,AAA*2 SIZE
One pole two throw switch
Single pole twelve throw switch
Push button
S1 S3-8 S10
VR1
VR2
100 k, ±10%,Variable resistor(POT)
10k,±20%,Variable resistor(POT)
100 k
10 k
14
Rev. 0.1
Si4822/26-DEMO
6. Schematics and Gerber
N C
B 1
G N D
t u A o
V C C
]
[ 2 N W O D T S H U
A - 2 V R
V C C
V C C
U 1
E _ N L N A
1
T U A O
N C
2 4
2 3
2 2
2 1
2 0
1 9
1 8
1 7
1 6
1 5
1 4
1 3
Q I R
2
1 E N T U
3
P Y D B
D V D 2
2 E N T U
4
D N B A
D V D 1
D N B A ] [ 1
5
N C
I L A X T
6
N C
O L A X T
7
I
F M
G F N R D
L K S C
]
[ 2 L K S C
[ 2 O I S D
8
O I S D
]
9
N C
N C
T
R S
1 0
1 1
1 2
G N D
G N D
I
A M
V C C
Rev. 0.1
15
Si4822/26-DEMO
1 7
3
2
1
0
S E G 1
S E G 1
S E G 1
S E G 1
S E G 9
S E G 8
]
[ 2
[ 2
[ 2
[ 2
3
S _ 1 D L C
1 6
1 5
1 4
1 3
1 2
1 1
1 0
9
2
S _ 1 D L C
]
1
0
S _ 1 D L C
]
S _ 1 D L C
]
S _ 9 D L C
]
[ 2
S _ 8 D L C ] [ 2
S _ 7 D L C
]
[ 2
[ 2
[ 2
S E G 7
S E G 6
S E G 5
S E G 4
S E G 3
S E G 2
S E G 1
S _ 6 D L C
]
S _ 5 D L C
]
8
S _ 4 D L C ] [ 2
S _ 3 D L C
7
]
[ 2
[ 2
[ 2
[ 2
[ 2
[ 2
[ 2
6
S _ 2 D L C
]
5
S _ 1 D L C
]
WS
4
S _ 0 D L C
]
S E G 0
3
3 C _ D L C
]
3 M C O
2 M C O
1 M C O
M
MW
2
2 C _ D L C
]
1
1 C _ D L C
]
V C C
3
S _ 1 D L C
S _ 5 D L C
S _ 4 D L C
S _ 3 D L C
S _ 2 D L C
S _ 1 D L C
S _ 0 D L C
1 R _ Y K E
0 R _ Y K E
]
[ 2
C L E / 1 B I O 2 8 G / E S
P L E / 2 B I O 2 9 G / E S
B Z B / 3 B I O 3 0 G / E S
Z B / 4 B I O 3 1 G / E S
I 1 K C 1 I / O 3 2 G / E S
I 2 K C 2 I / O 3 3 G / E S
I 3 K C 3 I / O 3 4 G / E S
I 4 K C 4 I / O 3 5 G / E S
T E R E S
) 8 ( K S E G 8
]
[ 2
[ 2
[ 2
[ 2
[ 2
[ 2
[ 2
[ 2
2 2
3 4
3 5
3 6
3 7
3 8
3 9
4 0
4 1
4 2
4 3
4 4
N W O D T S H ] U [ 1
) 7 ( K S E G 7
]
2 1
) 6 ( K S E G 6
]
2 0
B Z
]
[ 2
) 5 ( K S E G 5
]
1 9
0 C _ Y K E ] [ 2
1 C _ Y K E ] [ 2
2 C _ Y K E ] [ 2
3 C _ Y K E ] [ 2
) 4 ( K S E G 4
]
]
]
1 8
) 3 ( K S E G 3
1 7
) 2 ( K S E G 2
1 6
) 1 ( K S E G 1
]
1 5
5 M C O
4 M C O
3 M C O
1 4
1 3
1 2
T
I N
3 C _ D L C
T S T E
]
[ 2
16
Rev. 0.1
Si4822/26-DEMO
Rev. 0.1
17
Smart.
Connected.
Energy-Friendly
Products
www.silabs.com/products
Quality
www.silabs.com/quality
Support and Community
community.silabs.com
Disclaimer
Silicon Laboratories intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers
using or intending to use the Silicon Laboratories products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific
device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Laboratories
reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy
or completeness of the included information. Silicon Laboratories shall have no liability for the consequences of use of the information supplied herein. This document does not imply
or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products must not be used within any Life Support System without the specific
written consent of Silicon Laboratories. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected
to result in significant personal injury or death. Silicon Laboratories products are generally not intended for military applications. Silicon Laboratories products shall under no
circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.
Trademark Information
Silicon Laboratories Inc., Silicon Laboratories, Silicon Labs, SiLabs and the Silicon Labs logo, CMEMS®, EFM, EFM32, EFR, Energy Micro, Energy Micro logo and combinations
thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZMac®, EZRadio®, EZRadioPRO®, DSPLL®, ISOmodem ®, Precision32®, ProSLIC®, SiPHY®,
USBXpress® and others are trademarks or registered trademarks of Silicon Laboratories Inc. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of
ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders.
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
USA
http://www.silabs.com
相关型号:
SI4826DY-E3
Small Signal Field-Effect Transistor, 5.3A I(D), 30V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, LEAD FREE, SOP-8
VISHAY
SI4826DY-T1-E3
Small Signal Field-Effect Transistor, 5.3A I(D), 30V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, LEAD FREE, SOP-8
VISHAY
SI4829DY-T1-GE3
TRANSISTOR 2000 mA, 20 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, HALOGEN FREE AND ROHS COMPLIANT, SOP-8, FET General Purpose Small Signal
VISHAY
©2020 ICPDF网 联系我们和版权申明