V62/05623-01XE [TI]
增强型产品 2 通道、2 输入、1.65V 至 5.5V 与非门 | DCT | 8 | -55 to 115;型号: | V62/05623-01XE |
厂家: | TEXAS INSTRUMENTS |
描述: | 增强型产品 2 通道、2 输入、1.65V 至 5.5V 与非门 | DCT | 8 | -55 to 115 |
文件: | 总9页 (文件大小:126K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74LVC2G00W-EP
DUAL 2-INPUT POSITIVE-NAND GATE
www.ti.com
SCES645–SEPTEMBER 2005
FEATURES
•
Controlled Baseline
•
•
±24-mA Output Drive at 3.3 V
– One Assembly/Test Site, One Fabrication
Site
Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 3.3 V, TA = 25°C
•
•
Extended Temperature Performance of –55°C
to 115°C
•
•
•
•
Typical VOHV (Output VOH Undershoot)
>2 V at VCC = 3.3 V, TA = 25°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Ioff Supports Partial-Power-Down Mode
Operation
•
•
•
•
•
•
Enhanced Product-Change Notification
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
(1)
Qualification Pedigree
ESD Protection Exceeds JESD 22
Supports 5-V VCC Operation
– 2000-V Human-Body Model (A114-A)
– 1000-V Charged-Device Model (C101)
Inputs Accept Voltages to 5.5 V
Max tpd of 5.3 ns at 3.3 V
Low Power Consumption, 10-µA Max ICC
DCT PACKAGE
(TOP VIEW)
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
1A
1B
2Y
V
CC
1
2
3
4
8
7
6
5
1Y
2B
2A
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
GND
DESCRIPTION/ORDERING INFORMATION
This dual 2-input positive-NAND gate is designed for 1.65-V to 5.5-V VCC operation.
The SN74LVC2G00W-EP performs the Boolean function Y = A • B or Y = A + B in positive logic.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
TOP-SIDE MARKING(2)
–55°C to 115°C
SSOP – DCT
Reel of 3000
SN74LVC2G00WDCTREP
C00_ _ _
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) DCT: The actual top-side marking has three additional characters that designate the year, month, and assembly/test site.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74LVC2G00W-EP
DUAL 2-INPUT POSITIVE-NAND GATE
www.ti.com
SCES645–SEPTEMBER 2005
FUNCTION TABLE
(EACH GATE)
INPUTS
OUTPUT
Y
A
H
L
B
H
X
L
L
H
H
X
LOGIC DIAGRAM (POSITIVE LOGIC)
1
7
1A
1B
1Y
2
5
6
3
2A
2B
2Y
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
–0.5
MAX UNIT
VCC Supply voltage range
6.5
6.5
6.5
V
V
VI
Input voltage range(2)
VO
VO
IIK
Voltage range applied to any output in the high-impedance or power-off state(2)
Voltage range applied to any output in the high or low state(2)(3)
V
–0.5 VCC + 0.5
V
Input clamp current
VI < 0
–50
–50
mA
mA
mA
mA
IOK
IO
Output clamp current
VO < 0
Continuous output current
Continuous current through VCC or GND
Package thermal impedance(4)
Storage temperature range
±50
±100
θJA
DCT package
220 °C/W
150 °C
Tstg
–65
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
2
SN74LVC2G00W-EP
DUAL 2-INPUT POSITIVE-NAND GATE
www.ti.com
SCES645–SEPTEMBER 2005
Recommended Operating Conditions(1)
MIN
1.65
MAX UNIT
Operating
5.5
V
VCC
Supply voltage
Data retention only
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
1.5
0.65 × VCC
1.7
VIH
High-level input voltage
V
2
0.7 × VCC
0.35 × VCC
0.7
VIL
Low-level input voltage
V
0.8
0.3 × VCC
5.5
VCC
–4
VI
Input voltage
0
0
V
V
VO
Output voltage
VCC = 1.65 V
VCC = 2.3 V
–8
IOH
High-level output current
Low-level output current
–16
–24
–32
4
mA
mA
VCC = 3 V
VCC = 4.5 V
VCC = 1.65 V
VCC = 2.3 V
8
IOL
16
VCC = 3 V
24
VCC = 4.5 V
32
VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V
VCC = 3.3 V ± 0.3 V
VCC = 5 V ± 0.5 V
20
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
10
ns/V
5
TA
–55
115
°C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3
SN74LVC2G00W-EP
DUAL 2-INPUT POSITIVE-NAND GATE
www.ti.com
SCES645–SEPTEMBER 2005
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
1.65 V to 5.5 V
1.65 V
MIN TYP(1)
VCC – 0.1
MAX UNIT
IOH = –100 µA
IOH = –4 mA
IOH = –8 mA
IOH = –16 mA
IOH = –24 mA
IOH = –32 mA
IOL = 100 µA
IOL = 4 mA
1.2
1.9
2.4
2.3
3.8
2.3 V
VOH
V
3 V
4.5 V
1.65 V to 5.5 V
1.65 V
0.1
0.45
IOL = 8 mA
2.3 V
0.3
V
VOL
IOL = 16 mA
0.4
3 V
IOL = 24 mA
0.55
0.57
IOL = 32 mA
4.5 V
0 to 5.5 V
0
II
A or B inputs
VI = 5.5 V or GND
VI or VO = 5.5 V
VI = 5.5 V or GND,
±5
±10
10
µA
µA
µA
µA
pF
Ioff
ICC
∆ICC
Ci
IO = 0
1.65 V to 5.5 V
3 V to 5.5 V
3.3 V
One input at VCC – 0.6 V, Other inputs at VCC or GND
VI = VCC or GND
500
5
(1) All typical values are at VCC = 3.3 V, TA = 25°C.
Switching Characteristics
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
VCC = 5 V
± 0.5 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MIN
MAX
MIN
MAX
5.8
MIN MAX
1.1 5.3
MIN
MAX
4.3
tpd
A or B
Y
3.7
8.9
1.6
1
ns
Operating Characteristics
TA = 25°C
VCC = 1.8 V
TYP
VCC = 2.5 V
TYP
VCC = 3.3 V
TYP
VCC = 5 V
PARAMETER
TEST CONDITIONS
UNIT
TYP
Cpd
Power dissipation capacitance
f = 10 MHz
19
19
20
22
pF
4
SN74LVC2G00W-EP
DUAL 2-INPUT POSITIVE-NAND GATE
www.ti.com
SCES645–SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION
V
LOAD
S1
Open
R
L
From Output
Under Test
TEST
/t
S1
GND
t
t
Open
PLH PHL
C
L
t
/t
V
R
L
PLZ PZL
LOAD
GND
(see Note A)
/t
PHZ PZH
LOAD CIRCUIT
INPUTS
V
CC
V
M
V
LOAD
C
L
R
L
V
∆
V
I
t /t
r f
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5 V ± 0.5 V
V
V
3 V
≤2 ns
≤2 ns
≤2.5 ns
≤2.5 ns
V
/2
/2
2 × V
2 × V
6 V
2 × V
CC
30 pF
30 pF
50 pF
50 pF
1 kΩ
500 Ω
500 Ω
500 Ω
0.15 V
0.15 V
0.3 V
CC
CC
CC
V
CC
CC
CC
1.5 V
/2
V
CC
V
CC
0.3 V
V
I
Timing Input
Data Input
V
M
0 V
t
w
t
t
h
su
V
I
V
I
Input
V
M
V
M
V
M
V
M
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
I
V
I
Output
Control
V
M
V
M
Input
V
M
V
M
0 V
0 V
t
t
t
t
t
PHL
PZL
PLZ
PLH
Output
Waveform 1
V
V
OH
V
V
/2
LOAD
V
V
V
M
M
Output
V
V
M
S1 at V
LOAD
V
OL
+ V
∆
OL
(see Note B)
OL
t
PHL
PLH
t
t
PHZ
PZH
Output
Waveform 2
S1 at GND
V
V
OH
V
OH
V
− V
∆
V
M
OH
M
Output
M
≈0 V
OL
(see Note B)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω.
O
D. The outputs are measured one at a time, with one transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PLH
PHZ
are the same as t
PZH
en
are the same as t .
PHL pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
5
PACKAGE OPTION ADDENDUM
www.ti.com
19-Sep-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SN74LVC2G00WDCTREP
ACTIVE
SM8
DCT
8
1
TBD
Call TI
Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan
-
The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS
&
no Sb/Br)
-
please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
16-Apr-2008
PACKAGING INFORMATION
Orderable Device
SN74LVC2G00WDCTREP
V62/05623-01XE
Status (1)
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SM8
DCT
8
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SM8
DCT
8
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
MECHANICAL DATA
MPDS049B – MAY 1999 – REVISED OCTOBER 2002
DCT (R-PDSO-G8)
PLASTIC SMALL-OUTLINE PACKAGE
0,30
0,15
M
0,13
0,65
8
5
0,15 NOM
2,90
2,70
4,25
3,75
Gage Plane
PIN 1
INDEX AREA
0,25
1
4
0° – 8°
0,60
0,20
3,15
2,75
1,30 MAX
Seating Plane
0,10
0,10
0,00
4188781/C 09/02
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion
D. Falls within JEDEC MO-187 variation DA.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
相关型号:
V62/06601-01XE
增强型产品轨分离器精密虚拟接地 | D | 8 | -55 to 125Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06602-01XE
2.7-V TO 5.5-V 12-BIT 3-μs QUADRUPLE DIGITAL-TO-ANALOG CONVERTER WITH POWER DOWNWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06603-01XE
PARALLEL-LOAD 8-BIT SHIFT REGISTERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06604-01XE
OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06605-01XE
DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06606-01XE
CURRENT-MODE PWM CONTROLLERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06607-02XE
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWNWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06607-03YE
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWNWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06607-04YE
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWNWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06608-01XE
1.5°C ACCURATE DIGITAL TEMPERATURE SENSOR WITH SPI⢠INTERFACEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06609-01XE
16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
V62/06610-01XE
4.5-V TO 20-V INPUT, 3-A OUTPUT SYNCHRONOUS PWM SWITCHER WITH INTEGRATED FET (SWIFTâ¢)Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
©2020 ICPDF网 联系我们和版权申明