TFS175A [VECTRON]

Filter Specification; 过滤器规格
TFS175A
型号: TFS175A
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter Specification
过滤器规格

过滤器
文件: 总5页 (文件大小:37K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
tfs175a.doc  
version 1.0  
23.04.01  
______________________________________________________________________________________________________  
VI TELEFILTER  
Filter Specification  
TFS 175 A  
1/5  
______________________________________________________________________________________________________  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedance:  
source:  
23 °C  
dBm  
0
1,22 k|| -7,3 pF  
580 || -9,7 pF  
load:  
Characteristics  
Remark:  
Reference level for the relative attenuation a of the TFS 175 A is the minimum of the pass band attenuation a  
. The minimum of the pass band  
rel  
is defined as the insertion loss a . The nominal frequency f is fixed to 175,0 MHz. The given values for the relative attenuation  
min  
attenuation a  
min  
e
N
a
and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency f is shifted due to the temperature  
rel  
coefficient of frequency TC in the operating temperature range and due to a production tolerance for the centre frequency f .  
c
f
c
D a t a  
typ. Value  
Limit  
______________________________________________________________________________________________________  
Insertion Loss  
a
= a  
min  
5 dB  
e
max.  
9
dB  
(Reference Level)  
______________________________________________________________________________________________________  
Nominal Frequency 175,0 MHz  
______________________________________________________________________________________________________  
f
-
N
Relative Attenuation  
a
rel  
f
f
-
90  
90  
kHz ... f  
kHz ... f  
+
±
90  
kHz  
kHz  
0,2 dB  
0,5 dB  
max.  
max.  
0,5 dB  
1,0 dB  
N
N
N
N
±
150  
f
f
f
f
f
f
f
f
f
±
±
±
±
±
±
±
-
400  
600  
800  
kHz ... f  
kHz ... f  
±
±
±
±
±
±
±
-
600  
800  
kHz  
kHz  
18  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
min. 13  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
35  
42  
min  
min  
min  
min  
min  
min  
min  
min  
30  
40  
43  
47  
50  
45  
40  
40  
kHz...  
f
1,6 MHz  
3,0 MHz  
5,8 MHz  
1,6 MHz... f  
3,0 MHz... f  
5,8 MHz... f  
47  
52  
35  
MHz  
MHz  
MHz  
57  
35  
MHz... f  
MHz... f  
MHz... f  
75  
75  
>70  
>55  
>55  
1
+
75  
+
1,0 GHz  
______________________________________________________________________________________________________  
Group Delay  
GD  
Group Delay Ripple  
f
± 90 kHz  
0,2 µs  
max 400  
ns  
N
______________________________________________________________________________________________________  
Operating Temperature Range  
-10 ... 85° C  
Storage Temperature Range  
-40 ... 85° C  
______________________________________________________________________________________________________  
Input power  
max. 15  
dBm**)  
Permissible DC voltage  
max. 30  
V *)  
______________________________________________________________________________________________________  
2
Temperature Coefficient  
TC  
- 0,036 ppm/K  
-
______________________________________________________________________________________________________  
*) between any two terminals  
**) a power of 20 dBm can be applied shortly, for 10 years life time the cycle time should be less than 1:50  
generated:  
checked / approved:  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
tfs175a.doc  
version 1.0  
23.04.01  
______________________________________________________________________________________________________  
VI TELEFILTER  
Filter Specification  
TFS 175 A  
2/5  
______________________________________________________________________________________________________  
Construction and Pin Connection  
(All dimensions in mm)  
15,32 ±0,20  
Datecode  
1
2
3
4
5
6
7
8
9
10  
Input RF return  
Ground  
Ground  
Ground  
Output  
Output RF return  
Ground  
Ground  
Ground  
Input  
TFS175A  
N16  
6,50 ±0,20  
2,0Max.  
1,0  
0,2  
1
Datecode:  
Year+week  
L
1999  
2000  
2001  
120°  
M
N
...  
1,9  
0,2  
1,91  
0,2  
0,2  
7,62  
50 matching circuit  
L1  
L2  
10  
5
Input  
Output  
SAW  
50 Ohm  
50 Ohm  
C1  
C2  
1,2,3,4,6,7,8,9  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
tfs175a.doc  
version 1.0  
23.04.01  
______________________________________________________________________________________________________  
VI TELEFILTER  
Filter Specification  
TFS 175 A  
3/5  
______________________________________________________________________________________________________  
Stability Characteristics  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
500g, 18 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 – 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 – 6  
3. Damp heat:  
(cycle)  
25 °C to 55°C / 95% r.H. / 10 cycles  
DIN IEC 68 – 2 – 30 Db  
4. Resistance to  
solder heat (reflow):  
max. 2 times reflow process;  
for temperature conditions refer to the attached “Air reflow temperature conditions” on page 4;  
Packing  
Tape & Reel:  
DIN IEC 286 – 3, with exception of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters per reel:  
Reel of empty components at start:  
Reel of empty components at start including leader:  
Trailer  
2000  
min 300 mm  
min 500 mm  
min 300 mm  
Tape (all dimensions in mm)  
EMBOSSED CARRIER TAPE  
W
:
:
24  
4
± 0,3  
± 0,1  
Po  
Po  
P 2  
D
o
Do  
E
:
:
1,5 + 0,1  
1,75 ± 0,1  
E
F
Ao  
F
:
11,5 ± 0,1  
0,60  
G (min) :  
D1  
Ct  
W
Bo  
P2  
P1  
:
:
2
± 0,1  
12 ± 0,1  
D1(min) : 1,5  
G
Ao  
:
7,1 ± 0,2  
P1  
Bo  
Ct  
:
:
15,9 ± 0,2  
21,5 ± 0,1  
COVER TAPE  
W
2
Reel (all dimensions in mm):  
A
:
330  
W1  
:
:
24,40 +2,0  
W2 (max) :  
30,4  
60  
N (min)  
C
C
:
13  
0,5/-0.A2  
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.  
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on  
the right side of the tape.  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
tfs175a.doc  
version 1.0  
23.04.01  
______________________________________________________________________________________________________  
VI TELEFILTER  
Filter Specification  
TFS 175 A  
4/5  
______________________________________________________________________________________________________  
Air reflow temperature conditions  
1st and 2nd air reflow profile  
Name:  
pre-heating periods  
main-heating periods  
over 200 °C  
peak temperature  
255 °C ± 5 °C  
Temperature: 150 °C – 170 °C  
Time:  
60 sec. – 90 sec.  
20 sec. – 25 sec.  
Chip-mount air reflow profile  
260  
240  
220  
200  
180  
160  
140  
120  
100  
80  
60  
40  
20  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
180  
200  
220  
240  
time / sec.  
Table for temperature vs. Time during the air reflow process  
Tolerance of temperatures: ± 5 °C  
time / sec.  
0
Temperature / °C  
time / sec.  
140  
150  
160  
170  
180  
190  
195  
200  
205  
210  
215  
220  
230  
240  
Temperature / °C  
23  
34  
46  
60  
80  
103  
121  
134  
143  
150  
154  
156  
158  
159  
160  
161  
164  
170  
180  
205  
230  
255  
230  
205  
180  
165  
140  
120  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
110  
120  
130  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
tfs175a.doc  
version 1.0  
23.04.01  
______________________________________________________________________________________________________  
VI TELEFILTER  
Filter Specification  
TFS 175 A  
5/5  
______________________________________________________________________________________________________  
History  
Version  
Reason of Changes  
Name  
Date  
1.0  
- new generation according to to customer specification 010219  
Steiner  
23.04.2001  
______________________________________________________________________________________________________  
VI TELEFILTER  
Potsdamer Straße 18  
Vectron International, Inc.  
267 Lowell Road  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
Hudson, NH 03051 / USA  
Tel: (603) 598-0070 Fax: (603) 598-0075  
E-Mail: vti@vtinh.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS175D

Filter specification
VECTRON

TFS175K

SAW Filter, 1 Function(s), 175MHz,
MICROSEMI

TFS179

Filter Specification
VECTRON

TFS182

Filter specification
VECTRON

TFS183A

Development specification
VECTRON

TFS183B

Development specification
ETC

TFS1842

Preliminary Specification
VECTRON

TFS1842A

Development specification
VECTRON

TFS186A

Filter specification
VECTRON

TFS1880

Filter specification
VECTRON

TFS1880_05

Filter specification
VECTRON

TFS188A

Filter Specification
VECTRON