M-FIAM3MS1 [VICOR]
Military 270Vin Filter Input Attenuator Module; 军事270Vin滤波器输入衰减模块型号: | M-FIAM3MS1 |
厂家: | VICOR CORPORATION |
描述: | Military 270Vin Filter Input Attenuator Module |
文件: | 总4页 (文件大小:271K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
M-FIAM3
Military COTS 270Vin Filter
Input Attenuator Module
45
Features
• EMI filtering-MIL-STD-461E
• Transient protection-MIL-STD-704E/F
• Environments-MIL-STD-810, MIL-STD-202
• Environmental stress screening
• Low profile mounting options
• Output current up to 3 Amps
• Mini sized package
Shown actual size:
2.28 x 2.2 x 0.5 in
• Inrush current limiting
57,9 x 55,9 x 12,7 mm
Product Highlights
The M-FIAM3 is a DC front-end module
that provides EMI filtering and transient
protection. The M-FIAM3 enables designers
using Vicor 2nd Generation 300V DC-DC
converters to meet conducted emission/
conducted susceptibility per MIL-STD-461E;
and input transients per MIL-STD-704E/F.
The M-FIAM3 accepts an input voltage of
180-375Vdc and delivers output current up
to 3 Amps.
Absolute Maximum Rating
Parameter
+In to –In
Rating
375
Unit
Vdc
Vdc
in-lbs
°F (°C)
°F (°C)
°C
°C
°C
°C
Notes
Continuous
100ms
6 each, #4-40 or M3
<5 sec; wave solder
<7 sec; hand solder
Baseplate
+In to –In
400
Mounting torque
5 (0.57)
Pin Soldering temperature
Pin Soldering temperature
Operating temperature H–Grade
Storage temperature H–Grade
Operating temperature M–Grade
Storage temperature M–Grade
500 (260)
750 (390)
-40 to +100
-55 to +125
-55 to +100
-65 to +125
Baseplate
M-FIAM3 is housed in an industry
standard "half brick" module measuring
2.28" x 2.2" x 0.5" and depending upon
model selected, may be mounted on-board
or in-board for height critical applications.
Specifications
(typical at TBP = 25ºC, nominal line, 75% load, unless otherwise specified)
Parameter
Input voltage
Output current
Inrush limiting
Transient immunity
EMI:MIL-STD-461E
Conducted emissions:
Min
180Vdc
Typ
270Vdc
Max
375Vdc
3A
Remarks
Continuous
Compatible Products
• 2nd Generation 300V Input
DC-DC converters
0.018A/µF
Exceeds limits of MIL-STD-704E/F
CE101, CE102
Conducted susceptibility: CS101, CS114, CS115, CS116
Part Number Format
Dielectric withstand
1,500Vrms
2,121Vdc
98%
Input/Output to base
Input/Output to base
Efficiency
96%
M-FIAM3 M 2 1
Internal voltage drop
ON/OFF control
Enable (ON)
3.0Vdc
5.0Vdc
@ 3A, 100°C baseplate
Product
0.0Vdc
3.5Vdc
1.0Vdc
5.0Vdc
Referenced to –Vout.
100kΩ internal pull-up resistor
See illustration C1 on page 3.
400V
Ounces (grams)
Years
Disable (OFF)
External capacitance
Product Grade(°C)
H = –40 to +100
M = –55 to +100
Pin Style
1 = Short
2 = Long
*S=Short ModuMate
*N=Long ModuMate
Baseplate
1 = Slotted
2 = Threaded
3 = Thru-hole
10µF
22µF
2
Weight
Warranty
3.3 (94)
*Compatible with SurfMate and InMate socketing systems.
MTBF per MIL-HDBK-217F (M-FIAM3M21)
Thermal Resistance
Parameter
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20264) 0.1°C/Watt
Baseplate to ambient
Typ
0.16°C/Watt
Temp.
25°C
50°C
65°C
Environment
MTBF
4,031
725
Unit
1,000 Hrs
1,000 Hrs
Ground benign:G.B.
Naval sheltered:N.S.
Airborne inhabited cargo:A.I.C.
1,000
568
Hrs
7.9°C/Watt
2.2°C/Watt
Baseplate to sink; 1000 LFM
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM3
Rev. 1.8
Page 1 of 4
Set your site on VICOR at www.vicorpower.com
Environmental Qualification
Environmental Stress Screening
H Grade
M Grade
Altitude
Operating Temp.
Storage Temp.
-40°C to +100°C
-55°C to +125°C
12 cycles
-55°C to +100°C
-65°C to +125°C
12 cycles
MIL-STD-810C, Method 500.2, Procedure I & II, 40,000 ft. and
70,000 ft. Operational.
Temp. Cycling:*
-65°C to +100°C
-65°C to +100°C
Explosive Atmosphere
MIL-STD-810F, Method 511.4, Procedure I, Operational.
Ambient Test
@ 25°C
Yes
Yes
Power Cycling
Burn-In:
12 hours,
28 cycles
24 hours,
56 cycles
Vibration
MIL-STD-810F, Method 514.5, Procedure I, Category 14, Sine
and Random vibration per Table 514.5C for Helicopter AH-6J
Main Rotor with overall level of 5.6 grams for 4 hours per axis.
MIL-STD-810F, Method 514.5C, General Minimum Integrity
Curve per Figure 514.5C-17 with overall level of 7.7 grams
for 1 hour per axis.
Functional and
Parametric
ATE Tests:
Hi-Pot Test
Visual Inspection:
Test Data
-40°C and
+100°C
-55°C and
+100°C
Yes
Yes
Yes
Yes
vicorpower.com
vicorpower.com
Shock
*Temperature cycled with power off, 17°C per minute rate of change.
MIL-STD-810-F, Method 516.5, Procedure I, Functional Shock,40 G's.
MIL-S-901D, Lightweight Hammer Shock, 3 impacts/axis, 1,3,5 ft.
MIL-STD-202F, Method 213B, 60 G's, 9ms half sine.
MIL-STD-202F, Method 213B, 75 G's, 11ms Saw Tooth Shock.
Conducted Noise
Acceleration
MIL-STD-810F, Method 513.5, Procedure II, table 513.5-II,
Operational, 2-7 G's, 6 directions.
Humidity
MIL-STD-810F, Method 507.4, Procedure I, Cycle I, 240 hrs, 95% RH.
Solder Test
MIL-STD-202F, Method 208, 8 hour aging.
Figure 1– M-FIAM3 and Model V300A48M500AL
DC-DC converter operating at 180Vdc, 130W.
Inrush Limiting
Transient Immunity
Output
Input
Figure 3– Inrush Limiting: Inrush current with 22µF external
Figure 2 – Transient Immunity: M-FIAM3 output response to
capacitance.
an input transient.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM3
Rev. 1.8
Page 2 of 4
Set your site on VICOR at www.vicorpower.com
Transient and Surge Protection
Note: The M-FIAM3 is shown in the on state. To disable,
open the connection between ON/OFF and –Out.
Capacitance (C1)
10µF(min),22µF(max)
Recommended Fuse:
3A Max., F03A Type
–IN
–
–
–OUT
–S
–IN
PR
ON
OFF
EMI
GND
2nd Generation
300Vdc Input
DC-DC Converters
MOV P/N
03040
C1
SC
M-FIAM3 NC
PC
NC
NC
+S
+
+
+IN
+OUT
+IN
Mechanical Diagram
Module Pins
0.50 ±0.02
12,7 ±0,5
No.
Function
Label
1
+In
+
No
Connection
2.20
55,9
1.74
44,2
0.01
2
NC
0.23
5,8
(REF)
3
4
5
6
Ground
–In
EMI/GND
2.000
50,80
0.10
2,5
style 2 & 3
baseplates only
(4X)***
0.49
12,4
0.12* 0.20**
3,1 5,1
0.300 ±0.015
7,62 ±0,38
–
–
0.10
X 45˚
2,5
CHAMFER
–Out
ON/OFF
ON/OFF
1
9
2
8
3
6
4
5
0.35
8,8
0.300 ±0.015
7,62 ±0,38
(2X)
0.65
16,5
FULL R (6X)
No
Connection
2.28
57,9
1.900
48,26
7
NC
1.30
33,0
ALUMINUM
BASEPLATE
0.130
(6X)
3,30
No
Connection
8
9
NC
+
7
Use a 4-40 Screw (6X)
Torque to:
+Out
0.150
DIA,(2X)
0.43
10,9
0.06
1,5
3,81
0.080
2,03
5 in-lbs
.57 N-m
R
(3X)
2.20
55,9
0.400
10,16
DIA,(7X)
0.54
(9X)
13,7
(REF.)
0.700
17,78
1.000
25,40
1.400
35,56
Short Pin
Long Pin
0.62
(9X)
15,7
Slotted (Style 1)
or
Threaded (Style 2)
4-40 UNC-2B (6X)
or
Thru Hole (Style 3)
#30 Drill Thru (6X)
(0.1285)
*
Style 1 baseplate only
** Style 2 & 3 baseplates
*** Reserved for Vicor accessories
Not for mounting
PCB Mounting Specifications
INBOARD
SOLDER
MOUNT
ONBOARD
SOLDER
MOUNT
ies
ALL MARKINGS
THIS SURFACE
SHORT PIN STYLE
LONG PIN STYLE
0.062 ±0.010
0.094 ±0.003
0.094 ±0.003
2,39 ±0,08
PCB THICKNESS
(7X)
1,57 ±0,25
2,39 ±0,08
PLATED
THRU HOLE
DIA
0.164 ±0.003
4,16 ±0,08
0.164 ±0.003
4,16 ±0,08
(2X)
1.790
45,47
0.06
1,5
R
(4X)
0.158
4,01
ALUMINUM
BASEPLATE
1
2
3
4
PINS STYLES
1.584*
40,23
1.900*
48.,26
SOLDER:TIN/LEAD
HOT SOLDER DIPPED
MODUMATE: GOLD PLATED COPPER
9
8
7
6
5
0.400*
0.43
10,9
0.53
13,5
10,16
0.700*
17,78
1.000*
25,40
* DENOTES
±0.003
0.195
4,95
1.400*
35,56
TOL =
±0,08
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM3
Rev. 1.8
Page 3 of 4
Set your site on VICOR at www.vicorpower.com
Vicor’s comprehensive line of power solutions includes high density AC-DC
and DC-DC modules and accessory components, fully configurable AC-DC
and DC-DC power supplies, and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is
assumed by Vicor for its use. Vicor components are not designed to be used in applications, such as life
support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to
Vicor’s Terms and Conditions of Sale, which are available upon request.
Specifications are subject to change without notice.
Component Solutions
for Your Power System
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
978-470-2900
Fax: 978-475-6715
Email
Vicor Express: vicorexp@vicr.com
Technical Support: apps@vicr.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
FARM, Filter/Autoranging Rectifier Module
Rev. 1.8
06/05
Set your site on VICOR at www.vicorpower.com
相关型号:
©2020 ICPDF网 联系我们和版权申明