VS-ETU1506-M3 [VISHAY]
DIODE 15 A, 600 V, SILICON, RECTIFIER DIODE, TO-220AC, HALOGEN FREE AND ROHS COMPLIANT PACKAGE-2, Rectifier Diode;型号: | VS-ETU1506-M3 |
厂家: | VISHAY |
描述: | DIODE 15 A, 600 V, SILICON, RECTIFIER DIODE, TO-220AC, HALOGEN FREE AND ROHS COMPLIANT PACKAGE-2, Rectifier Diode 局域网 通用无线电 二极管 |
文件: | 总8页 (文件大小:174K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS-ETU1506-M3,VS-ETU1506FP-M3
www.vishay.com
Vishay Semiconductors
Ultra Fast Rectifier, 15 A FRED Pt®
FEATURES
4
• Low forward voltage drop
• Ultrafast soft recovery time
• 175 °C operating junction temperature
• Low leakage current
1
1
• Fully isolated package (VINS = 2500 VRMS
)
2
2
• True 2 pin package
TO-220AC 2L
TO-220 FullPAK 2L
• Designed and qualified according to
JEDEC®-JESD 47
Base
cathode
4
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
1
2
1
2
Cathode
Anode
Cathode
Anode
State of the art, ultralow VF, soft-switching ultrafast
rectifiers optimized for Discontinuous (Critical) Mode (DCM)
Power Factor Correction (PFC).
VS-ETU1506-M3
VS-ETU1506FP-M3
The minimized conduction loss, optimized stored charge
and low recovery current minimized the switching losses
and reduce over dissipation in the switching element and
snubbers.
PRIMARY CHARACTERISTICS
Package
TO-220AC 2L, TO-220FullPAK 2L
IF(AV)
15 A
600 V
1.1 V
The device is also intended for use as a freewheeling diode
in power supplies and other power switching applications.
VR
VF at IF
APPLICATIONS
trr (typ.)
24 ns
175 °C
Single
AC/DC SMPS 70 W to 400 W
e.g. laptop and printer AC adaptors, desktop PC, TV and
monitor, games units and DVD AC/DC power supplies.
TJ max.
Circuit configuration
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Peak repetitive reverse voltage
VRRM
600
V
TC = 151 °C
C = 103 °C
TJ = 25 °C
Average rectified forward current in DC
IF(AV)
15
FullPAK
T
A
Non-repetitive peak surge current
IFSM
160
Operating junction and storage temperatures
TJ, TStg
-65 to +175
°C
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNITS
Breakdown voltage,
blocking voltage
VBR
VR
,
IR = 100 μA
IF = 15 A
600
-
-
V
-
-
-
-
-
-
1.35
1.1
0.01
20
1.9
1.3
15
200
-
Forward voltage
VF
IR
IF = 15 A, TJ = 150 °C
VR = VR rated
Reverse leakage current
μA
TJ = 150 °C, VR = VR rated
VR = 600 V
Junction capacitance
Series inductance
CT
LS
12
pF
nH
Measured lead to lead 5 mm from package body
8
-
Revision: 31-May-17
Document Number: 93534
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETU1506-M3,VS-ETU1506FP-M3
www.vishay.com
Vishay Semiconductors
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
IF = 1 A, dIF/dt = 100 A/μs, VR = 30 V
IF = 15 A, dIF/dt = 100 A/μs, VR = 30 V
TJ = 25 °C
MIN.
TYP.
24
MAX.
UNITS
-
-
-
-
-
-
-
-
-
-
-
28
47
-
36
Reverse recovery time
trr
ns
40
TJ = 125 °C
87
-
IF = 15 A
TJ = 25 °C
5
-
Peak recovery current
IRRM
dIF/dt = 200 A/μs
TJ = 125 °C
A
9
-
VR = 390 V
TJ = 25 °C
107
430
53
-
Reverse recovery charge
Qrr
nC
TJ = 125 °C
-
Reverse recovery time
Peak recovery current
Reverse recovery charge
trr
-
ns
A
IF = 15 A
IRRM
Qrr
TJ = 125 °C
dIF/dt = 800 A/μs
25
-
VR = 390 V
730
-
nC
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNITS
Maximum junction and storage
temperature range
TJ, TStg
-65
-
175
°C
-
-
1.2
3.7
1.4
4.3
Thermal resistance,
junction to case
RthJC
FULL-PAK
Thermal resistance,
junction to ambient
°C/W
RthJA
RthCS
Typical socket mount
-
-
-
70
-
Typical thermal resistance,
case to heatsink
Mounting surface, flat, smooth and greased
0.5
-
-
2
-
-
g
Weight
0.07
oz.
6
(5)
12
(10)
kgf · cm
(lbf · in)
Mounting torque
Marking device
-
Case style TO-220AC 2L
ETU1506
ETU1506FP
Case style TO-220 FullPAK 2L
Revision: 31-May-17
Document Number: 93534
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETU1506-M3,VS-ETU1506FP-M3
www.vishay.com
Vishay Semiconductors
100
1000
175 °C
100
TJ = 175 °C
150 °C
10
125 °C
100 °C
75 °C
50 °C
1
0.1
10
TJ = 150 °C
25 °C
500
0.01
TJ = 25 °C
1.5
0.001
0.0001
1
0
100
200
300
400
600
0.5
1.0
2.0
2.5
VR - Reverse Voltage (V)
Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage
VF - Forward Voltage Drop (V)
Fig. 1 - Typical Forward Voltage Drop Characteristics
1000
100
10
1
0
100
200
300
400
500
600
VR - Reverse Voltage (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
1
D = 0.5
D = 0.2
D = 0.1
0.1
D = 0.05
D = 0.02
D = 0.01
Single Pulse
(Thermal Resistance)
0.01
1E-05
1E-04
1E-03
1E-02
1E-01
1E+00
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Revision: 31-May-17
Document Number: 93534
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETU1506-M3,VS-ETU1506FP-M3
www.vishay.com
Vishay Semiconductors
10
D = 0.5
1
D = 0.2
D = 0.1
D = 0.05
D = 0.02
D = 0.01
Single Pulse
(Thermal Resistance)
0.1
1E-05
1E-04
1E-03
1E-02
1E-01
1E+00
1E+01
1E+02
t1 - Rectangular Pulse Duration (s)
Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FullPAK)
180
170
160
150
140
130
180
160
140
DC
120
DC
100
80
60
40
20
0
2
4
6
8
10
12
14
16
0
2
4
6
8
10
12
14
16
IF(AV) - Average Forward Current (A)
IF(AV) - Average Forward Current (A)
Fig. 6 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 7 - Maximum Allowable Case Temperature vs.
Average Forward Current (FullPAK)
30
25
20
15
10
5
RMS Limit
D = 0.01
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
DC
0
0
5
10
15
20
25
IF(AV) - Average Forward Current (A)
Fig. 8 - Forward Power Loss Characteristics
Revision: 31-May-17
Document Number: 93534
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETU1506-M3,VS-ETU1506FP-M3
www.vishay.com
Vishay Semiconductors
120
110
100
90
900
800
700
IF = 15 A, 125 °C
IF = 15 A, 125 °C
600
80
500
400
300
70
60
50
IF = 15 A, 25 °C
typical value
IF = 15 A, 25 °C
40
200
30
100
20
typical value
0
10
100
1000
100
1000
dIFdt (A/μs)
dIFdt (A/μs)
Fig. 9 - Typical Reverse Recovery vs. dIF/dt
Fig. 10 - Typical Stored Charge vs. dIF/dt
(3)
trr
IF
ta
tb
0
(4)
Qrr
(2)
IRRM
0.5 IRRM
(5)
dI(rec)M/dt
0.75 IRRM
dIF/dt
(1)
(4) Qrr - area under curve defined by trr
(1) dIF/dt - rate of change of current
and IRRM
through zero crossing
trr x IRRM
(2) IRRM - peak reverse recovery current
Qrr
=
2
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(5) dI(rec)M/dt - peak rate of change of
current during tb portion of trr
Fig. 11 - Reverse Recovery Waveform and Definitions
Revision: 31-May-17
Document Number: 93534
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETU1506-M3,VS-ETU1506FP-M3
www.vishay.com
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
E
T
U
15
06
FP -M3
1
2
3
4
5
6
7
8
1
-
Vishay Semiconductors product
Circuit configuration:
E = single diode
2
-
3
4
5
6
7
-
-
-
-
-
T = TO-220
U = hyperfast recovery time
Current code: 15 = 15 A
Voltage code: 06 = 600 V
None = TO-220
FP = FullPAK
8
-
Environmental digit:
-M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
VS-ETU1506-M3
VS-ETU1506FP-M3
QUANTITY PER TUBE
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
Antistatic plastic tube
50
50
1000
1000
Antistatic plastic tube
LINKS TO RELATED DOCUMENTS
TO-220AC 2L
www.vishay.com/doc?95259
Dimensions
TO-220 FullPAK 2L
TO-220AC 2L
www.vishay.com/doc?95260
www.vishay.com/doc?95391
www.vishay.com/doc?95392
www.vishay.com/doc?96130
www.vishay.com/doc?96131
Part marking information
SPICE model
TO-220 FullPAK 2L
TO-220AC 2L
TO-220 FullPAK 2L
Revision: 31-May-17
Document Number: 93534
6
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
www.vishay.com
True 2 Pin TO-220 FULL-PAK
DIMENSIONS in millimeters and inches
A
Ø Q
F
E
Q1
H1
D
Q2
θ
L1
b1
L
b
C
e
J1
MILLIMETERS
INCHES
SYMBOL
MIN.
MAX.
4.93
MIN.
0.178
0.028
0.045
0.014
0.617
0.392
MAX.
0.194
0.036
0.055
0.021
0.633
0.408
A
b
4.53
0.71
1.15
0.36
15.67
9.96
0.91
b1
C
1.39
0.53
D
16.07
10.36
E
e
5.08 typical
0.200 typical
F
2.34
6.50
2.56
12.78
2.23
2.98
3.10
14.80
0°
2.74
6.90
2.96
13.18
2.63
3.38
3.50
15.20
5°
0.092
0.256
0.101
0.503
0.088
0.117
0.122
0.583
0°
0.107
0.272
0.117
0.519
0.104
0.133
0.138
0.598
5°
H1
J1
L
L1
Ø Q
Q1
Q2
Revision: 05-Dec-12
Document Number: 95260
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
VS-ETU1506FP-M3
DIODE 15 A, 600 V, SILICON, RECTIFIER DIODE, TO-220, HALOGEN FREE AND ROHS COMPLIANT, TO-220, FULL PACK-2, Rectifier Diode
VISHAY
VS-ETU1506STRL-M3
DIODE 15 A, 600 V, SILICON, RECTIFIER DIODE, TO-263AB, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMD-220, D2PAK-3, Rectifier Diode
VISHAY
VS-ETU1506STRLHM3
Rectifier Diode, 1 Phase, 1 Element, 15A, 600V V(RRM), Silicon, TO-263AB, D2PAK-3/2
VISHAY
VS-ETU1506STRR-M3
DIODE 15 A, 600 V, SILICON, RECTIFIER DIODE, TO-263AB, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMD-220, D2PAK-3, Rectifier Diode
VISHAY
VS-ETU1506STRRHM3
Rectifier Diode, 1 Phase, 1 Element, 15A, 600V V(RRM), Silicon, TO-263AB, D2PAK-3/2
VISHAY
VS-ETU3006-1-M3
DIODE 30 A, 600 V, SILICON, RECTIFIER DIODE, TO-262AA, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Rectifier Diode
VISHAY
VS-ETU3006S-M3
DIODE 30 A, 600 V, SILICON, RECTIFIER DIODE, TO-263AB, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMD-220, D2PAK-3, Rectifier Diode
VISHAY
VS-ETU3006STRL-M3
DIODE 30 A, 600 V, SILICON, RECTIFIER DIODE, TO-263AB, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMD-220, D2PAK-3, Rectifier Diode
VISHAY
©2020 ICPDF网 联系我们和版权申明