IE-703037-MC-EM1 [ETC]
IE-703037-MC-EM1 User's Manual | User's Manual[05/1999] ; IE- 703037 -MC- EM1用户手册|用户手册[ 05/1999 ]\n型号: | IE-703037-MC-EM1 |
厂家: | ETC |
描述: | IE-703037-MC-EM1 User's Manual | User's Manual[05/1999]
|
文件: | 总35页 (文件大小:220K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
User’s Manual
IE-703037-MC-EM1
In-circuit Emulator Option Board
Target device
V850/SB1™
Document No. U14151EJ1V0UM00 (1st edition)
Date Published May 1999 N CP(K)
1999
©
Printed in Japan
[MEMO]
User’s Manual U14151EJ1V0UM00
2
V850 family and V850/SB1 are trademarks of NEC Corporation.
Windows is either a trademark or a registered trademark of Microsoft Corporation in the United States
and/or other countries.
PC/AT is a trademark of International Business Machines Corporation.
Ethernet is a trademark of Xerox Corporation.
UNIX is a registered trademark in the United States and other countries, licensed exclusively through
X/Open Company Limited.
• The information in this document is subject to change without notice. Before using this document,
please confirm that this is the latest version.
• No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or of others.
• Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
M7A 98. 8
User’s Manual U14151EJ1V0UM00
3
Regional Information
Some information contained in this document may vary from country to country. Before using any NEC
product in your application, pIease contact the NEC office in your country to obtain a list of authorized
representatives and distributors. They will verify:
•
•
•
•
•
Device availability
Ordering information
Product release schedule
Availability of related technical literature
Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
•
Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
NEC Electronics Inc. (U.S.)
Santa Clara, California
Tel: 408-588-6000
800-366-9782
NEC Electronics (Germany) GmbH NEC Electronics Hong Kong Ltd.
Benelux Office
Hong Kong
Eindhoven, The Netherlands
Tel: 040-2445845
Tel: 2886-9318
Fax: 2886-9022/9044
Fax: 408-588-6130
800-729-9288
Fax: 040-2444580
NEC Electronics Hong Kong Ltd.
Seoul Branch
Seoul, Korea
Tel: 02-528-0303
Fax: 02-528-4411
NEC Electronics (France) S.A.
Velizy-Villacoublay, France
Tel: 01-30-67 58 00
NEC Electronics (Germany) GmbH
Duesseldorf, Germany
Tel: 0211-65 03 02
Fax: 01-30-67 58 99
Fax: 0211-65 03 490
NEC Electronics Singapore Pte. Ltd.
United Square, Singapore 1130
Tel: 65-253-8311
NEC Electronics (France) S.A.
Spain Office
Madrid, Spain
NEC Electronics (UK) Ltd.
Milton Keynes, UK
Tel: 01908-691-133
Fax: 65-250-3583
Tel: 91-504-2787
Fax: 01908-670-290
Fax: 91-504-2860
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: 02-2719-2377
NEC Electronics Italiana s.r.l.
Milano, Italy
Tel: 02-66 75 41
NEC Electronics (Germany) GmbH
Scandinavia Office
Taeby, Sweden
Fax: 02-2719-5951
Fax: 02-66 75 42 99
Tel: 08-63 80 820
NEC do Brasil S.A.
Fax: 08-63 80 388
Electron Devices Division
Rodovia Presidente Dutra, Km 214
07210-902-Guarulhos-SP Brasil
Tel: 55-11-6465-6810
Fax: 55-11-6465-6829
J99.1
User’s Manual U14151EJ1V0UM00
4
INTRODUCTION
Target Readers
Purpose
This manual is intended for users who design and develop application systems using
the V850/SB1™.
The purpose of this manual is to describe the proper operation of the IE-703037-MC-
EM1 and its basic specifications.
Organization
This manual is divided into the following parts.
•
•
•
Overview
Names and functions of components
Cautions
How to Read This Manual
It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers.
The IE-703037-MC-EM1 is used connected to the IE-703002-MC in-circuit emulator.
This manual explains the basic setup procedure and switch settings of the IE-
703002-MC when it is connected to the IE-703037-MC-EM1. For the names and
functions of parts, and the connection of elements, refer to the IE-703002-MC User’s
Manual.
To learn about the basic specifications and operation methods
→ Read this manual in the order of the CONTENTS.
To learn the operation methods and command functions, etc., of the IE-703002-MC
and IE-703037-MC-EM1
→ Read the user’s manual of the debugger (sold separately) that is used.
Conventions
Note:
Footnote for item marked with Note in the text
Caution:
Remark:
Information requiring special attention
Supplementary information
…
Numeral representation: Binary
Decimal
xxxx or xxxxB
…
xxxx
…
Hexadecimal
xxxxH
Prefix indicating an exponent of 2 (address space, memory capacity):
K (kilo):
210 = 1024
220 = 10242
M (mega):
Terminology
The meanings of terms used in this manual are listed below.
Target device
Target system
The device that is targeted for emulation.
The system (user-built system) that is targeted for debugging. This
includes the target program and user-configured hardware.
5
User’s Manual U14151EJ1V0UM00
Related Documents
When using this manual, refer to the following manual.
The related documents indicated in this publication may include preliminary versions.
However, preliminary versions are not marked as such.
{ Documents related to development tools (User’s Manual)
Document Name
Document
Number
IE-703002-MC (In-circuit emulator)
IE-703037-MC-EM1 (In-circuit emulator option board)
U11595E
This manual
U12839E
U12827E
U12840E
U10543E
U11991E
U13716E
U13430E
U13431E
U13410E
U13773E
U13772E
U13774E
U11158E
U13737E
U11181E
CA850 (C Compiler package)
Operation UNIXTM based
Operation WindowsTM based
C language
Assembly Language
Project manager Windows-based
Operation Windows-based
Basics
ID850 (Integrated debugger)
RX850 (Real-time OS)
Technical
Installation
RX850 Pro (Real-time OS)
Basics
Technical
Installation
RD850 (Task debugger)Note
RD850 (Ver.3.0) (Task debugger)
AZ850 (System performance analyzer) Operation
Note For ID850 (Ver. 1.31 only)
6
User’s Manual U14151EJ1V0UM00
CONTENTS
CHAPTER 1 OVERVIEW .........................................................................................................................11
1.1
1.2
1.3
1.4
1.5
1.6
Hardware Configuration............................................................................................................................... 11
Features (When Connected to IE-703002-MC) ........................................................................................... 12
Function Specifications (When Connected to IE-703002-MC).................................................................. 12
System Configuration .................................................................................................................................. 13
Contents in Carton ....................................................................................................................................... 14
Connection between IE-703002-MC and IE-703037-MC-EM1................................................................ 16
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS................................................................19
2.1
2.2
Component Names and Functions of IE-703037-MC-EM1........................................................................ 19
Clock Settings............................................................................................................................................... 21
2.2.1
2.2.2
Main system clock setting ................................................................................................................ 21
Subsystem clock setting................................................................................................................... 22
2.3
2.4
2.5
Illegal Access Detection ROM Setting........................................................................................................ 23
CPU Operation Voltage Range Switching Setting..................................................................................... 23
Separate Bus Function Setting ................................................................................................................... 24
CHAPTER 3 FACTORY SETTINGS........................................................................................................25
CHAPTER 4 CAUTIONS..........................................................................................................................27
4.1
4.2
4.3
4.4
4.5
4.6
VDD, BVDD, and EVDD of Target System........................................................................................................ 27
NMI Signal ..................................................................................................................................................... 28
VPP Signal ...................................................................................................................................................... 28
MAM Register................................................................................................................................................ 28
NMI Signal Mask Function........................................................................................................................... 29
Bus Interface Pin .......................................................................................................................................... 29
APPENDIX PACKAGE DRAWINGS.........................................................................................................31
7
User’s Manual U14151EJ1V0UM00
LIST OF FIGURES
Figure No.
Title
Page
1-1. System Configuration ........................................................................................................................................13
1-2. Contents in Carton.............................................................................................................................................14
1-3. Accessories .......................................................................................................................................................15
1-4. Connection between IE-703002-MC and IE-703037-MC-EM1..........................................................................17
2-1. IE-703037-MC-EM1...........................................................................................................................................19
4-1. Schematic Diagram of Power Supply Acquisition..............................................................................................27
4-2. NMI Signal Flow Path........................................................................................................................................28
4-3. VPP Signal Flow Path.........................................................................................................................................28
8
User’s Manual U14151EJ1V0UM00
LIST OF TABLES
Table No.
Title
Page
2-1. Main System Clock Setting ............................................................................................................................... 21
2-2. Subsystem Clock Setting .................................................................................................................................. 22
2-3. JP1 Setting in IE-703002-MC............................................................................................................................ 23
2-4. JP3 and JP4 Setting in IE-703002-MC.............................................................................................................. 23
2-5. MAM Register and J1 Setting Correspondence................................................................................................ 24
4-1. Bus Interface Pin Operation List........................................................................................................................ 29
9
User’s Manual U14151EJ1V0UM00
[MEMO]
10
User’s Manual U14151EJ1V0UM00
CHAPTER 1 OVERVIEW
The IE-703037-MC-EM1 is an option board for the IE-703002-MC in-circuit emulator. By connecting the IE-
703037-MC-EM1 and IE-703002-MC, hardware and software can be debugged efficiently in system development
using the V850/SB1.
In this manual, the basic setup procedure and switch settings of the IE-703002-MC when using the IE-703037-MC-
EM1 are described. For the names and functions of the parts of the IE-703002-MC, and for the connection of
elements, refer to the IE-703002-MC User’s Manual.
1.1 Hardware Configuration
Optional hardware
In-circuit emulator (IE-703002-MC)
Option board
By adding this board, the IE-703002-MC can be used as in-circuit
emulator for V850/SB1.
(IE-703037-MC-EM1)
Optional hardware
Extension probe (SC-100SDNote 1
)
General-purpose extension probe made by TOKYO ELETECH
CORPORATION
PC interface board
IE-70000-xx-IF-B
IE-70000-xx-IF-C
IE-70000-PCI-IF
IE-70000-CD-IF-A
This board is used to connect the IE-703002-MC to a personal computer.
This board is inserted in the expansion slot of the personal computer.
xx: 98 (for PC-9800 series C bus)Note 2
xx: PC (for IBM PC/AT™ or compatibles ISA bus)Note 2
IE-70000-PCI-IF: for PCI bus
IE-70000-CD-IF-A: for PCMCIA socket
Network module
This module is used when a workstation controls the IE-703002-MC via
an Ethernet™.
(IE-70000-MC-SV3)
Power adapter
AC adapter for in-circuit emulator made by NEC Corporation.
(IE-70000-MC-PS-B)
Notes 1. For further information, contact to Daimaru Kogyo Co., Ltd
Tokyo Electronics Department (TEL +81-3-3820-7112)
Osaka Electronics Department (TEL +81-6-6244-6672)
2. Cannot be used for PC98-NX series
.
11
User’s Manual U14151EJ1V0UM00
CHAPTER 1 OVERVIEW
1.2 Features (When Connected to IE-703002-MC)
{
{
{
{
Maximum operating frequency: 20 MHz (at 3.3 to 5.0-V operation)
Extremely lightweight and compact
Higher equivalence with target device can be achieved by omitting buffer between signal cables.
The following pins can be masked.
RESET, NMI, WAIT, HLDRQ
{
{
Two methods of connection to target system:
• Pod tip direct connection (For information on the pod, refer to the IE-703002-MC User’s Manual)
• Attach an extension probe (sold separately) to the pod tip for connection
The dimensions of the IE-703037-MC-EM1 are as follows.
Parameter
Power consumption (Max. value at 3.3-V supply voltage)
Value
0.35 W (at 20-MHz operation frequency)Note
External dimensions
(Refer to APPENDIX PACKAGE
DRAWINGS)
Height
Length
Width
15 mm
194 mm
96 mm
160 g
Weight
Note 10.35 W when IE-703002-MC connected to IE-703037-MC-EM1
1.3 Function Specifications (When Connected to IE-703002-MC)
Parameter
Specification
Emulation memory capacity
Internal ROM
256 Kbytes
2 Mbytes
1 Mbyte
External
memory
In ROM-less mode
When using iROM
Execution/pass detection
coverage memory capacity
Internal ROM
256 Kbytes
2 Mbytes
1 Mbyte
External
memory
In ROM-less mode
When using iROM
Memory access detection coverage memory capacity (external memory)
1 Mbyte
Coverage memory capacity for branching
entry number counting
Internal ROM
256 Kbytes
2 Mbytes
1 Mbyte
External
memory
In ROM-less mode
When using iROM
Caution
Some of the functions may not be supported, depending on the debugger used.
12
User’s Manual U14151EJ1V0UM00
CHAPTER 1 OVERVIEW
1.4 System Configuration
The system configuration when connecting the IE-703002-MC to the IE-703037-MC-EM1 and a personal computer
(PC-9800 series or PC/ATTM (or compatibles)) is shown below.
Figure 1-1. System Configuration
<13>
<5>
<6>
<7>
[Magnified drawing: example of use of
connector for target connection]
<12>
<14>
<8>
<2>
<4>
<10>
Target
system
<11>
For PC-9800 series
<9>
<3>
<10>
<11>
For PC/AT or
compatibles
<1>
Target system
Remark
<1> Personal computer (PC-9800 series or PC/AT or compatibles)
<2> Debugger (sold separately)
<3> PC interface board
(IE-70000-98-IF-B/IE-70000-98-IF-C, IE-70000-PC-IF-B/IE-70000-PC-IF-C: sold separately)
<4> PC interface cable (included with IE-703002-MC)
<5> In-circuit emulator (IE-703002-MC: sold separately)
<6> In-circuit emulator option board (IE-703037-MC-EM1)
<7> External logic probe (included with IE-703002-MC)
<8> Socket for target connection (YQSOCKET100SDN: included with IE-703002-MC)
<9> Extension probe (SC-100SD: sold separately)
<10> Connector for emulator connection (YQPACK100SD: included in IE-703002-MC)
<11> Connector for target connection (NQPACK100SD: included)
<12> Power adapter (IE-70000-MC-PS-B : sold separately)
<13> AC100-V power cable (sold separately: included with IE-70000-MC-PS-B)
<14> AC220-V power cable (sold separately: included with IE-70000-MC-PS-B)
13
User’s Manual U14151EJ1V0UM00
CHAPTER 1 OVERVIEW
1.5 Contents in Carton
The carton of the IE-703037-MC-EM1 contains a main unit, guarantee card, packing list, and accessory bag.
Make sure that the accessory bag contains this manual and the connector accessories. If there are missing or
damaged items, please contact an NEC sales representative or an NEC distributor.
Figure 1-2. Contents in Carton
<1> IE-703037-MC-EM1
<4> Packing list
<3> Guarantee card
<2> Accessory bag
<1> IE-703037-MC-EM1 × 1
<2> Accessory bag × 1
<3> Guarantee card × 1
<4> Packing list × 1
14
User’s Manual U14151EJ1V0UM00
CHAPTER 1 OVERVIEW
Check that the accessory bag contains this manual, an accessory list, and the following accessories.
(a) Plastic screws × 4
(including nuts and washer × 4 sets)
Figure 1-3. Accessories
(a) Plastic screws
15
User’s Manual U14151EJ1V0UM00
CHAPTER 1 OVERVIEW
1.6 Connection between IE-703002-MC and IE-703037-MC-EM1
The procedure for connecting the IE-703002-MC and IE-703037-MC-EM1 is described below.
Caution
Connect carefully so as not to break or bend connector pins.
<1> Remove the pod cover (upper and lower) of the IE-703002-MC.
<2> Set the PGA socket lever of the IE-703037-MC-EM1 to the OPEN position as shown in Figure 1-4 (b).
<3> Connect the IE-703037-MC-EM1 to the PGA socket at the back of the IE-703002-MC pod (refer to Figure 1-4
(c)). When connecting, position the IE-703002-MC and IE-703037-MC-EM1 so that they are horizontal.
<4> Set the PGA socket lever of the IE-703037-MC-EM1 to the CLOSE position as shown in Figure 1-4 (b).
<5> Set the IE-703002-MC pod jumpers (JP1 to JP4).
Open JP1 (Remove the jumper contact and attach the removed jumper contact to one of the jumper pins to
avoid losing it.)
Retain the factory settings of JP2 (pins 1 and 2 shorted, and pins 5 and 6 shorted).
Short pins 1 and 2 of JP3.
Retain the factory settings of JP4 (pins 2 and 3 shorted).
<6> Fix the IE-703037-MC-EM1 between the IE-703002-MC pod covers (upper and lower) with the plastic screws
(supplied with the IE-703002-MC).
<7> Fix the IE-703002-MC pod cover (upper) end with nylon rivets.
Remark For the JP1 setting, refer to 2.3 Illegal Access Detection ROM Setting. For JP3 and JP4, refer
to 2.4 CPU Operation Voltage Range Switch Setting.
16
User’s Manual U14151EJ1V0UM00
CHAPTER 1 OVERVIEW
Figure 1-4. Connection between IE-703002-MC and IE-703037-MC-EM1 (1/2)
(a) Overview
Nut
Upper cover
Washer
IE-703037-MC-EM1
Nylon rivets
IE-703002-MC
Lower cover
Plastic screw
(b) PGA Socket Lever of IE-703037-MC-EM1
CLOSE
OPEN
17
User’s Manual U14151EJ1V0UM00
CHAPTER 1 OVERVIEW
Figure 1-4. Connection between IE-703002-MC and IE-703037-MC-EM1 (2/2)
(c) Connecting part (IE-703037-MC-EM1)
Pin A1 position
: Insertion guide
: IE-703002-MC insertion area
18
User’s Manual U14151EJ1V0UM00
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
This chapter describes the names, functions, and switch settings of components in the IE-703037-MC-EM1. For
the details of the pod, jumper, and switch positions, etc., refer to the IE-703002-MC User’s Manual.
2.1 Component Names and Functions of IE-703037-MC-EM1
Figure 2-1. IE-703037-MC-EM1
(a) Top View
(b) Bottom View
Direction of pin 1 of connector
for target connection
Direction of pin 1 of connector
for target connection
Connector for target connection
V
PP
JP2
JP3
J1
LED
V850/SB1
I/O chip
EPROM
JP1
FPGA
Connector for
IE-703002-MC connection
19
User’s Manual U14151EJ1V0UM00
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
(1) JP1
This is the jumper switch for product check. Leave open.
(2) JP2
This is the switch jumper of the main system clock supply source. (For details, refer to 2.2 Clock Settings)
(3) JP3
This is a pin board for supplying the subsystem clock. (For details, refer to 2.2 Clock Settings)
(4) LED
LED for VPP
ON: Voltage is applied to VPP
OFF: Voltage is not applied to VPP
(5) Connector for IE-703002-MC connection
This is a connector for connecting with the IE-703002-MC.
(6) Connector for target connection
This is a connector for connecting with the target system or the extension probe.
20
User’s Manual U14151EJ1V0UM00
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
2.2 Clock Settings
This section describes the clock settings.
For JP1 and JP2 position in the IE-703037-MC-EM1, refer to Figure 2-1.
For the jumper switch position in the IE-703002-MC, refer to the IE-703002-MC User’s Manual.
2.2.1 Main system clock setting
Table 2-1. Main System Clock Setting
Emulator Use
Environment
Clock Supply Method
Internal clockNote 1
IE-703037-MC-EM1 Setting
JP2
IE-703002-MC Setting
SW2 JP2
SW1
ON
When using
emulator as
Oscillator mounted (a 20-
MHz oscillator is mounted
when shipped)Note 2
ON
7
8
1
2
standalone unit
Notes 1. A target clock is not supported
.
2. To use a main system clock frequency other than 20 MHz, remove the oscillator on JP2 and mount any
oscillator.
The specifications of JP2 are as follows.
V850/SB1
I/O chip
X2
X1
1
7
21
User’s Manual U14151EJ1V0UM00
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
2.2.2 Subsystem clock setting
Table 2-2. Subsystem Clock Setting
Emulator Use
Environment
Clock Supply Method
Internal clockNote 1
IE-703037-MC-EM1 Setting
JP3
When using emulator as
standalone unit
Oscillator mounted (a 32.768-kHz oscillator is mounted when
shipped)Note 2
Notes 1. A target clock is not supported Internal clock does not support the clock input by oscillator.
.
2. To use a subsystem clock frequency other than 32.768 kHz, remove the oscillator on JP3 and mount
any oscillator.
The specifications of JP3 are as follows.
V850/SB1
I/O chip
XT1
XT2
1
7
22
User’s Manual U14151EJ1V0UM00
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
2.3 Illegal Access Detection ROM Setting
If using the IE-703002-MC for an in-circuit emulator for the V850/SB1 by connecting the IE-703037-MC-EM1, set
JP1 of the IE-703002-MC as follows.
Table 2-3. JP1 Setting in IE-703002-MC
JP1
Description
OpenNote
Illegal Access Detection ROM (mounted on IE-703037-MC-EM1) for V850/SB1 is
used.
JP1
Note When JP1 is set open, keep the removed jumper contact attached to one pin
as shown in the drawing on the right.
Jumper
contact
2.4 CPU Operation Voltage Range Switching Setting
If using the IE-703002-MC for an in-circuit emulator for the V850/SB1 by connecting the IE-703037-MC-EM1, set
JP3 and JP4 of the IE-703002-MC as follows.
Table 2-4. JP3 and JP4 Setting in IE-703002-MC
JP3, JP4
JP3
1
2
(Short)
JP4
1
2
3
23
User’s Manual U14151EJ1V0UM00
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
2.5 Separate Bus Function Setting
To use the separate bus function, J1 of the IE-703037-MC-EM1 must be set. Table 2-5 shows the correspondence
between the MAM register and J1 settings.
Table 2-5. MAM Register and J1 Setting Correspondence
MAM2
0
MAM1
0
MAM0
0
Operation of P34 to P36, P100 to P107, P110 to P113
J1 Setting
P34 to P36
P100 to P107
P110 to P113
P34 to P36
P100 to P107
P110 to P113
P34 to P36
P100 to P103
P104 to P107
P110 to P113
P34 to P36
P100 to P107
P110 to P113
P34
Port mode
Port mode
Port mode
Port mode
Port mode
A1 to A4
Port mode
A5 to A8
Port mode
A1 to A4
Port mode
A5 to A12
A1 to A4
A13
2
1
12
11
0
0
1
1
0
1
2
1
12
11
2
1
12
11
1
1
0
0
0
1
2
1
12
11
P35, P36
Port mode
A5 to A12
A1 to A4
A13, A14
Port mode
A5 to A12
A1 to A4
A13 to A15
A5 to A12
A1 to A4
2
1
12
11
P100 to P107
P110 to P113
P34, P35
1
1
1
1
0
1
P36
2
1
12
11
P100 to P107
P110 to P113
P34 to P36
P100 to P107
P110 to P113
2
1
12
11
24
User’s Manual U14151EJ1V0UM00
CHAPTER 3 FACTORY SETTINGS
Item
Description
Remark
JP1
Jumper switch for product check
JP2
JP3
J1
Oscillator mounted
Oscillator mounted
20-MHz clock supplied for main system clock.
32.768-kHz clock supplied for subsystem clock.
Set to port mode (P34 to P36, P100 to P107,
P110 to P113)
2
1
12
11
25
User’s Manual U14151EJ1V0UM00
[MEMO]
26
User’s Manual U14151EJ1V0UM00
CHAPTER 4 CAUTIONS
4.1 VDD, BVDD, and EVDD of Target System
(1) BVDD in the target system is not connected to BVDD in the evaluation chip in the IE-703002-MC.
The IE-703002-MC uses BVDD of the target system for the following purposes:
•
•
Power ON/OFF detection of target system
BVDD emulation of target system
(2) When the BVDD voltage of the target system is 1 V or higher, the evaluation chip in the emulator operates using
the supply of VDD and EVDD from the target system. The power consumption is equivalent to that of the
V850/SB1.
(3) When the BVDD voltage of the target system is lower than 1 V, the emulator recognizes the target system power
is off and operates at VDD = BVDD = EVDD = 5.0 V.
Figure 4-1. Schematic Diagram of Power Supply Acquisition
IE-703002-MC
IE-703037-MC-EM1
BVDD
Target voltage
emulation
55
5V
BVDD < 1V
V850/SB1
I/O chip
Relay
Target system
V
DD
EVDD
BVDD
ICE BVDD BVDD ≥ 1V
EVDD
6
Relay
5V
Evaluation chip
V
DD
38
Relay
BVDD ≥ 1V
BVDD < 1V
27
User’s Manual U14151EJ1V0UM00
CHAPTER 4 CAUTIONS
4.2 NMI Signal
The input signal (NMI signal) from the target system is delayed (tpD = 0.25 ns (TYP.)) because it passes through
QS3125 (Q switch) before it is input to the I/O chip of the emulator.
In addition, the DC characteristics change. The input voltage becomes VIH = 2.0 V (MIN.), and VIL = 0.8 V (MAX.).
The input current becomes IIN = ±0.5 µA (MAX.).
Figure 4-2. NMI Signal Flow Path
IE-703037-MC-EM1
NMI signal
Target system
NMI pin
QS3125
I/O chip
4.3 VPP Signal
The VPP signal from the target system is connected to LED via a 330-Ω resistor in the emulator. It is not
connected to the evaluation chip in the emulator.
Figure 4-3. VPP Signal Flow Path
IE-703037-MC-EM1
VPP signal
Evaluation
chip
Target system
330 Ω
LED
4.4 MAM Register
Debugging of the MAM register cannot be performed in the emulator. If debugging the MAM register with
software, proceed with care.
In the target device, ports can be used as address buses by setting values to the MAM register (address:
FFFFF068H), which is mapped in the internal peripheral I/O area, using software (separate bus function). In the
emulator, however, switching to the separate bus through a MAM register setting by software is impossible.
To use the separate bus function, set the J1 jumper in advance. (Refer to 2.5 Separate Bus Function Setting)
28
User’s Manual U14151EJ1V0UM00
CHAPTER 4 CAUTIONS
4.5 NMI Signal Mask Function
When using the P00/NMI pin in the port mode, do not mask the NMI signal.
4.6 Bus Interface Pin
The operation of the pin for the bus interface differs between the emulator and the target device as follows.
Table 4-1. Bus Interface Pin Operation List (1/2)
(a) During break
Pin Name
Internal Memory
External Memory
Emulation RAM Target System
Memory Used by
Emulator
Internal
ROM
Internal RAM
Internal
Peripheral I/O
F
R
W
R
R
W
R
W
R
W
R
W
A16 to A21
AD0 to AD15
ASTB
Hold the last accessed address
Active
Active
Active
Active
H
Active
Active
Active
Active
Active
Active
Active
Maskable
Maskable
H or L
H
Hi-Z
H
R/W
H
DSTB
H
LBEN
H
Active
Active
Maskable
Maskable
H or L
H
UBEN
WAIT
H
Invalid
HLDRQ
HLDAK
WRL
Maskable
H or L
H
H
H
Note
Note
H
WRH
H
H
RD
H
Note
Note Active
Remarks 1. F:
Fetch
R:
W:
Read
Write
2. H:
L:
High-level output
Low-level output
Hi-Z: High-impedance
29
User’s Manual U14151EJ1V0UM00
CHAPTER 4 CAUTIONS
Table 4-1. Bus Interface Pin Operation List (2/2)
(b) During run
Pin
Internal Memory
External Memory
Emulation RAM Target System
Name
Internal ROM
Internal RAM
Internal
Peripheral I/O
F
R
F
R
W
R
W
F
R
W
F
R
W
A16 to
A21
Hold the last accessed address
Active
Active
AD0 to
AD15
Hi-Z
Active
Active
ASTB
R/W
H
Active
Active
H
Active
Active
Active
Active
Active
Maskable
Maskable
H or L
H
H
DSTB
LBEN
UBEN
WAIT
HLDRQ
HLDAK
WRL
H
H
Active
Active
Maskable
Maskable
H or L
H
H
Invalid
Maskable
H or L
Note
Note
H
H
H
H
WRH
RD
H
H
Note
H
Note Active
Remarks 1. F:
Fetch
R:
W:
Read
Write
2. H:
L:
High-level output
Low-level output
Hi-Z: High-impedance
30
User’s Manual U14151EJ1V0UM00
APPENDIX PACKAGE DRAWINGS
IE-703002-MC + IE-703037-MC-EM1 (Unit: mm)
481
103
166
212
Top View
Pin 1 direction
Side View
IE-703002-MC
IE-703037-MC-EM1
Bottom View
194
14.5
Top View
29.0
31
User’s Manual U14151EJ1V0UM00
[MEMO]
32
User’s Manual U14151EJ1V0UM00
[MEMO]
33
User’s Manual U14151EJ1V0UM00
[MEMO]
34
User’s Manual U14151EJ1V0UM00
AlthoughNEChastakenallpossiblesteps
toensurethatthedocumentationsupplied
to our customers is complete, bug free
and up-to-date, we readily accept that
errorsmayoccur. Despiteallthecareand
precautions we've taken, you may
encounterproblemsinthedocumentation.
Please complete this form whenever
you'd like to report errors or suggest
improvements to us.
Facsimile Message
From:
Name
Company
Tel.
FAX
Address
Thank you for your kind support.
North America
Hong Kong, Philippines, Oceania Asian Nations except Philippines
NEC Electronics Inc.
Corporate Communications Dept.
Fax: 1-800-729-9288
1-408-588-6130
NEC Electronics Hong Kong Ltd.
Fax: +852-2886-9022/9044
NEC Electronics Singapore Pte. Ltd.
Fax: +65-250-3583
Korea
Japan
Europe
NEC Electronics Hong Kong Ltd.
Seoul Branch
Fax: 02-528-4411
NEC Semiconductor Technical Hotline
Fax: 044-548-7900
NEC Electronics (Europe) GmbH
Technical Documentation Dept.
Fax: +49-211-6503-274
South America
Taiwan
NEC do Brasil S.A.
Fax: +55-11-6465-6829
NEC Electronics Taiwan Ltd.
Fax: 02-2719-5951
I would like to report the following error/make the following suggestion:
Document title:
Document number:
Page number:
If possible, please fax the referenced page or drawing.
Document Rating
Clarity
Excellent
Good
Acceptable
Poor
Technical Accuracy
Organization
CS 99.1
相关型号:
©2020 ICPDF网 联系我们和版权申明