HMC590LP5E [HITTITE]
GaAs PHEMT MMIC 1 WATT POWER AMPLIFIER, 6.0 - 9.5 GHz; 的GaAs PHEMT MMIC 1瓦的功放， 6.0 - 9.5 GHz的
| 型号： | HMC590LP5E |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | GaAs PHEMT MMIC 1 WATT POWER AMPLIFIER, 6.0 - 9.5 GHz |
| 文件： | 总8页 (文件大小：373K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC590LP5 / 590LP5E
v01.0107
GaAs PHEMT MMIC 1 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
Typical Applications
The HMC590LP5 / HMC590LP5E is ideal for use as a
power amplifier for:
Features
Saturated Output Power: +31.5 dBm @ 23% PAE
Output IP3: +40 dBm
• Point-to-Point Radios
• Point-to-Multi-Point Radios
• Test Equipment & Sensors
• Military End-Use
Gain: 21 dB
DC Supply: +7.0 V @ 820 mA
50 Ohm Matched Input/Output
QFN Leadless SMT Packages, 25 mm2
• Space
Functional Diagram
General Description
The HMC590LP5 & HMC590LP5E are high dynamic
range GaAs PHEMT MMIC 1 Watt Power Amplifiers
whichoperate from6to9.5GHz.Theamplifierprovides
21 dB of gain, +31 dBm of saturated power, and 23%
PAE from a +7.0V supply. This 50 Ohm matched
amplifier does not require any external components
and the RF I/Os are DC blocked for robust operation.
For applications which require optimum OIP3, Idd
should be set for 520 mA, to yield +40 dBm OIP3. For
applications which require optimum output P1dB, Idd
should be set for 820 mA, to yield +30 dBm Output
P1dB.
Electrical Specifications, TA = +25° C, Vdd = +7V, Idd = 820 mA[1]
Parameter
Min.
Typ.
6 - 8
21
Max.
Min.
Typ.
6 - 9.5
21
Max.
Units
GHz
dB
Frequency Range
Gain
18
18
Gain Variation Over Temperature
Input Return Loss
0.05
15
0.05
12
dB/ °C
dB
Output Return Loss
11
10
dB
Output Power for 1 dB
Compression (P1dB)
27
30
27.5
30.5
dBm
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)[2]
Supply Current (Idd)
30.5
40
31
40
dBm
dBm
mA
820
820
[1] Adjust Vgg between -2 to 0V to achieve Idd= 820 mA typical.
[2] Measurement taken at 7V @ 520mA, Pin/Tone = -15 dBm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 590
HMC590LP5 / 590LP5E
v01.0107
GaAs PHEMT MMIC 1 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
Gain vs. Temperature
Broadband Gain & Return Loss
30
25
20
15
10
5
28
26
24
22
20
18
16
S21
S11
S22
0
-5
14
12
10
8
+25C
+85C
-40C
-10
-15
-20
-25
4
5
6
7
8
9
10
11
12
12
10
6
6.5
7
7.5
8
8.5
9
9.5
10
12
10
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
-5
-10
-15
-20
-5
-10
-15
-25
+25C
+25C
+85C
-40C
+85C
-20
-25
-40C
-30
-35
4
5
6
7
8
9
10
11
4
5
6
7
8
9
10
11
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs. Temperature
Psat vs. Temperature
35
34
33
32
31
30
29
28
27
26
25
35
34
33
32
31
30
29
28
27
26
25
+25C
+85C
-40C
+25C
+85C
-40C
6
6.5
7
7.5
8
8.5
9
9.5
6
6.5
7
7.5
8
8.5
9
9.5
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 591
HMC590LP5 / 590LP5E
v01.0107
GaAs PHEMT MMIC 1 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
P1dB vs. Current
Psat vs. Current
35
34
33
32
31
30
29
28
27
26
25
35
34
33
32
31
30
29
28
520mA
520mA
620mA
720mA
820mA
620mA
27
720mA
820mA
26
25
6
6.5
7
7.5
8
8.5
9
9.5
10
10
8
6
6.5
7
7.5
8
8.5
9
9.5
10
FREQUENCY (GHz)
FREQUENCY (GHz)
Output IP3 vs. Temperature
7V @ 520 mA, Pin/Tone = -15 dBm
Power Compression @ 8 GHz,
7V @ 820 mA
46
44
42
40
38
36
34
35
30
Pout
Gain
PAE
25
20
15
10
5
32
30
28
26
+25C
+85C
-40C
0
6
6.5
7
7.5
8
8.5
9
9.5
-14 -12 -10 -8 -6 -4 -2
0
2
4
6
8
10 12 14
FREQUENCY (GHz)
INPUT POWER (dBm)
Output IM3, 7V @ 520 mA
Output IM3, 7V @ 820 mA
80
70
60
50
40
80
70
60
50
40
30
20
10
6 GHz
7 GHz
8 GHz
9 GHz
10 GHz
30
6 GHz
7 GHz
20
10
0
8 GHz
9 GHz
10 GHz
0
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2
0
2
4
6
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2
0
2
4
6
8
Pin/Tone (dBm)
Pin/Tone (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 592
HMC590LP5 / 590LP5E
v01.0107
GaAs PHEMT MMIC 1 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
Gain & Power vs. Supply Current @ 8 GHz
Gain & Power vs. Supply Voltage @ 8 GHz
36
34
32
30
34
32
30
28
28
Gain
Gain
P1dB
P1dB
Psat
26
24
22
20
18
16
Psat
26
24
22
20
18
940
1140
Idd SUPPLY CURRENT (mA)
1340
6.5
7
7.5
Vdd SUPPLY VOLTAGE (Vdc)
Reverse Isolation
vs. Temperature, 7V @ 820 mA
Power Dissipation
0
6
5.75
5.5
5.25
5
-10
-20
+25C
+85C
-40C
-30
4.75
4.5
4.25
4
-40
-50
-60
-70
-80
6 GHz
7 GHz
8 GHz
9 GHz
10 GHz
3.75
3.5
3.25
3
6
6.5
7
7.5
8
8.5
9
9.5
10
-14 -12 -10 -8 -6 -4 -2
0
2
4
6
8
10 12 14
FREQUENCY (GHz)
INPUT POWER (dBm)
Typical Supply Current vs. Vdd
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
+8 Vdc
Vdd (V)
+6.5
Idd (mA)
Gate Bias Voltage (Vgg)
-2.0 to 0 Vdc
824
820
815
RF Input Power (RFin)(Vdd = +7.0 Vdc) +12 dBm
+7.0
Channel Temperature
175 °C
5.98 W
+7.5
Note: Amplifier will operate over full voltage ranges shown
above Vgg adjusted to achieve Idd = 820 mA at +7.0V
Continuous Pdiss (T= 75 °C)
(derate 59.8 mW/°C above 75 °C)
Thermal Resistance
(channel to package bottom)
16.72 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
-55 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 593
HMC590LP5 / 590LP5E
v01.0107
GaAs PHEMT MMIC 1 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H590
XXXX
HMC590LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
H590
XXXX
MSL1 [2]
HMC590LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 594
HMC590LP5 / 590LP5E
v01.0107
GaAs PHEMT MMIC 1 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 2, 6 - 19,
23, 24, 26,
27, 29, 31
N/C
GND
Not connected.
These pins and package bottom must
be connected to RF/DC ground.
3, 5, 20, 22
This pad is AC coupled and
matched to 50 Ohms.
4
RFIN
This pad is AC coupled and
matched to 50 Ohms.
21
RFOUT
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF and 2.2 μF are required.
25, 28, 30
Vdd 1-3
Gate control for amplifier. Adjust to achieve Idd of 820 mA.
Please follow “MMIC Amplifier Biasing Procedure”
Application Note. External bypass capacitors of 100 pF and
2.2 μF are required.
32
Vgg
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 595
HMC590LP5 / 590LP5E
v01.0107
GaAs PHEMT MMIC 1 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
Application Circuit
Component
C1 - C4
Value
100pF
2.2μF
C5 - C8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 596
HMC590LP5 / 590LP5E
v01.0107
GaAs PHEMT MMIC 1 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
Evaluation PCB
List of Materials for Evaluation PCB 115927 [1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
Item
Description
J1 - J2
J3
PCB Mount SMA Connector
DC Pin
C1 - C4
C5 - C8
U1
100 pF Capacitor, 0402 Pkg
2.2 μF Capacitor, 1206 Pkg
HMC590LP5 / HMC590LP5E
109001 Evaluation PCB
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 597
相关型号：
©2020 ICPDF网 联系我们和版权申明