ESD5V3S1B02LSE6327XTSA1 [INFINEON]
Trans Voltage Suppressor Diode, 5.3V V(RWM), Bidirectional, 1 Element, Silicon, 0.62 X 0.32 MM, 0.31 MM HEIGHT, GREEN, PLASTIC, TSSLP-2-1, 2 PIN;
| 型号： | ESD5V3S1B02LSE6327XTSA1 |
| 厂家： | 
Infineon |
| 描述： | Trans Voltage Suppressor Diode, 5.3V V(RWM), Bidirectional, 1 Element, Silicon, 0.62 X 0.32 MM, 0.31 MM HEIGHT, GREEN, PLASTIC, TSSLP-2-1, 2 PIN 局域网 二极管 |
| 文件： | 总17页 (文件大小：1080K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TVS Diode
Transient Voltage Suppressor Diodes
ESD5V3S1B-02LS
Bi-directional Symmetrical Medium Capacitance ESD / Transient Protection Diode
ESD5V3S1B-02LS
Data Sheet
Revision 1.0, 2011-04-08
Final
Industrial and Multi-Market
Edition 2011-04-08
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2011 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
ESD5V3S1B-02LS
Revision History
Page or Item
Subjects (major changes since previous revision)
Revision 1.0, 2011-04-08
Trademarks of Infineon Technologies AG
AURIX™, BlueMoon™, C166™, CanPAK™, CIPOS™, CIPURSE™, COMNEON™, EconoPACK™, CoolMOS™,
CoolSET™, CORECONTROL™, CROSSAVE™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™,
EconoPIM™, EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™, ISOFACE™, IsoPACK™,
MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OmniTune™, OptiMOS™, ORIGA™, PRIMARION™,
PrimePACK™, PrimeSTACK™, PRO-SIL™, PROFET™, RASIC™, ReverSave™, SatRIC™, SIEGET™,
SINDRION™, SIPMOS™, SMARTi™, SmartLEWIS™, SOLID FLASH™, TEMPFET™, thinQ!™,
TRENCHSTOP™, TriCore™, X-GOLD™, X-PMU™, XMM™, XPOSYS™.
Other Trademarks
Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™,
PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR
development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™,
FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG.
FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of
Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared Data
Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of
MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics
Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™
of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc.,
OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc.
RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc.
SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden
Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA.
UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™
of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of
Diodes Zetex Limited.
Last Trademarks Update 2010-10-26
Final Data Sheet
3
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Table of Contents
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1
1.1
1.2
Bi-directional Symmetrical Medium Capacitance ESD / Transient Protection Diode . . . . . . . . . 7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Application Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3
3.1
3.2
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical Characteristics at TA = 25 °C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Typical Characteristics at TA=25°C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4
5
Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Ordering Information Scheme (Examples) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6
6.1
Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PG-TSSLP-2-1 (mm) [2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Predefined Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Final Data Sheet
4
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
List of Figures
List of Figures
Figure 2-1 Pin Configuration and Schematic Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 3-1 Definitions of electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 3-2 Reverse current: IR = f(VR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 3-3 Reverse current: IR = f(TA), VR = 5.3 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 3-4 Line capacitance: CL = f(VR), f = 1MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 3-5 Clamping voltage (TLP): ITLP = f(VTLP) [1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 4-1 Single line, bi-directional ESD / Transient protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 5-1 Ordering information scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 6-1 PG-TSSLP-2-1: Package overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 6-2 PG-TSSLP-2-1: Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 6-3 PG-TSSLP-2-1: Packing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 6-4 PG-TSSLP-2-1: Marking (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Final Data Sheet
5
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
List of Tables
List of Tables
Table 2-1 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 3-1 Maximum Ratings at TA = 25 °C, unless otherwise specified. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 3-2 DC Characteristics at TA = 25 °C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 3-3 RF Characteristics at TA = 25 °C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 3-4 ESD Characteristics at TA = 25 °C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Final Data Sheet
6
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Bi-directional Symmetrical Medium Capacitance ESD / Transient Protection
1
Bi-directional Symmetrical Medium Capacitance ESD / Transient
Protection Diode
1.1
Features
•
ESD / transient protection of signal lines in low voltage applications according to:
– IEC61000-4-2 (ESD): ±20 kV (contact)
– IEC61000-4-4 (EFT): 40 A / 2 kV (5/50 ns)
– IEC61000-4-5 (surge): 5 A (8/20 μs)
•
•
•
•
Bi-directional, symmetrical working voltage up to VRWM = ±5.3 V
Low clamping voltage, low dynamic resistance RDYN = 0.5 Ω (typical)
Smallest form factor: 0.62 x 0.32 x 0.31 mm3
Pb-free (RoHS compliant) and halogen free package
1.2
Application Examples
•
•
•
•
Audio line protection
Mobile communication, Consumer products (STB, MP3, DVD, DSC...)
LCD displays, keypads, trackball protection, camera
Notebooks and desktop computers, peripherals
2
Product Description
Pin 1 marking
(lasered)
Pin 1
Pin 2
Pin 1
Pin 2
TSSLP -2
a) Pin configuration
b) Schematic diagram
PG-TSSLP-2_Dual_Diode_Serie_PinConf_and_SchematicDiag.vsd
Figure 2-1 Pin Configuration and Schematic Diagram
Table 2-1 Ordering Information
Type
Package
Configuration
Marking code
ESD5V3S1B-02LS
PG-TSSLP-2-1
1 line, bi-directional
H
Final Data Sheet
7
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Characteristics
3
Characteristics
Table 3-1 Maximum Ratings at TA = 25 °C, unless otherwise specified
Parameter
Symbol
Values
Typ.
Unit
Min.
–
Max.
20
ESD contact discharge1)
Peak pulse current (tp = 8/20 μs)2) IPP
VESD
–
–
–
–
kV
A
–
5
Operating temperature range
TOP
Tstg
-40
-55
125
150
°C
°C
Storage temperature
1) VESD according to IEC61000-4-2
2) IPP according to IEC61000-4-5
3.1
Electrical Characteristics at TA = 25 °C, unless otherwise specified
RDYN
Dynamic resistance
VBR Breakdown voltage
I
VRWM Reverse working voltage maximum
IPP
VCL
IPP
Clamping voltage
Peak pulse current
RDYN
IBR
IRWM
VCL
VBR
VRWM
VRWM
VBR
VCL
V
IRWM
IBR
RDYN
IPP
Diode_Characteristic_Curve_Bi-directional .vsd
Figure 3-1 Definitions of electrical characteristics
Table 3-2 DC Characteristics at TA = 25 °C, unless otherwise specified
Parameter Symbol Values
Typ.
Unit
Note /
Test Condition
Min.
-5.3
6
Max.
5.3
–
Reverse working voltage VRWM
–
–
–
V
Breakdown voltage
Reverse current
VBR
IR
V
IR = 1 mA
VR = 3.3 V
–
0.1
µA
Final Data Sheet
8
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Characteristics
Table 3-3 RF Characteristics at TA = 25 °C, unless otherwise specified
Parameter
Symbol
Values
Typ.
17
Unit
Note /
Test Condition
Min.
Max.
Line capacitance
CL
–
20
pF
VR = 0 V, f = 1 MHz
Table 3-4 ESD Characteristics at TA = 25 °C, unless otherwise specified
Parameter
Symbol
Values
Typ.
Unit
Note /
Test Condition
Min.
Max.
Reverse clamping
VCL
–
–
–
18
26
0.5
–
–
–
V
V
Ω
I
I
PP = 16 A
PP = 30 A
voltage1) [2]
Dynamic resistance1)[2] RDYN
1) Please refer to Application Note AN210. TLP parameter: Z0 = 50 Ω , tp = 100ns, tr = 300ps, averaging window: t1 = 30 ns
to t2 = 60 ns, extraction of dynamic resistance using least squares fit of TLP charactertistics between IPP1 = 10 A and
IPP2 = 40 A.
3.2
Typical Characteristics at TA=25°C, unless otherwise specified
10-6
10-7
10-8
10-9
10-10
10-11
10-12
0
1
2
3
4
5
6
VR [V]
Figure 3-2 Reverse current: IR = f(VR)
Final Data Sheet
9
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Characteristics
10-6
10-7
10-8
10-9
-50
-25
0
25
50
75
100
125
150
TA [°C]
Figure 3-3 Reverse current: IR = f(TA), VR = 5.3 V
20
19
18
17
16
15
14
13
12
11
10
0
1
2
3
4
5
6
VR [V]
Figure 3-4 Line capacitance: CL = f(VR), f = 1MHz
Final Data Sheet
10
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Application Information
60
50
40
30
20
10
0
30
25
20
15
10
5
ESD5V3S1B-02LS
RDYN
RDYN=0.5Ω
0
0
5
10
15
20
25
30
35
40
VTLP [V]
Figure 3-5 Clamping voltage (TLP): ITLP = f(VTLP) [1]
4
Application Information
Protected signal line
1
ESD
I/O sensitive
device
The protection diode should be placed very close to the location
where the ESD or other transients can occur to keep loops and
inductances as small as possible .
Pin 2 (or pin 1) should be connected directly to a ground plane on
the board .
2
Application_ESD5V3S1B-02LS.vsd
Figure 4-1 Single line, bi-directional ESD / Transient protection
Final Data Sheet
11
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Ordering Information Scheme (Examples)
5
Ordering Information Scheme (Examples)
ESD 0P1 RF - XX YY
Package
XX = Pin number (i.e.: 02 = 2 pins; 03 = 3 pins)
YY = Package family:
LS = TSSLP
LRH = TSLP
For Radio Frequency Applications
Line Capacitance CL in pF: (i.e.: 0P1 = 0.1pF)
ESD 5V3 U n U - XX YY
Package or Application
XX = Pin number (i.e.: 02 = 2 pins; 03 = 3 pins)
YY = Package family:
LS = TSSLP
LRH = TSLP
S = SOT363
U = SC74
XX = Application family:
LC = Low Clamp
HDMI
Uni- / Bi-directional or Rail to Rail protection
Number of protected lines(i.e.: 1 = 1 line; 4 = 4 lines)
Capacitance: Standard (>10pF), Low (<10pF), Ultra-low (<1pF)
Maximum working voltage VRWM in V: (i.e.: 5V3 = 5.3V)
Figure 5-1 Ordering information scheme
Final Data Sheet
12
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Package Information
6
Package Information
6.1
PG-TSSLP-2-1 (mm) [2]
Top view
Bottom view
+0ꢀ01
-0ꢀ02
0ꢀꢁ1
0ꢀ0ꢁ5
0ꢀꢁ2
2
1
1)
0ꢀ025
0ꢀ26
Cathode
marking
1) Dimension applies to plated terminal
TSSLP-2-1,-2-PO V05
Figure 6-1 PG-TSSLP-2-1: Package overview
0ꢀꢁ2
0ꢀ27
Copper
Solder mask
Stencil apertures
TSSLP-2-1,-2-FP V02
Figure 6-2 PG-TSSLP-2-1: Footprint
0ꢀꢁ5
4
Tape type
Ex Ey
Punched Tape
0ꢀ4ꢁ 0ꢀ7ꢁ
Embossed Tape 0ꢀꢁ7 0ꢀ67
Deliveries can be both tape types (no selection possible)ꢀ
Specification allows identical processing (pick & place) by usersꢀ
Cathode
marking
Ex
TSSLP-2-1,-2-TP V0ꢁ
Figure 6-3 PG-TSSLP-2-1: Packing
Figure 6-4 PG-TSSLP-2-1: Marking (example)
Final Data Sheet
13
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
References
References
[1] Infineon AG - Application Note AN210: Effective ESD Protection design at System Level Using VF-TLP
Characterization Methodology
[2] Infineon AG - Recommendations for PCB Assembly of Infineon TSLP and TSSLP Packages
Final Data Sheet
14
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Terminology
Terminology
CL
Line capacitance
DSC
DVD
EFT
ESD
IPP
Digital Still Camera
Digital Versatile Disc
Electrical Fast Transient
Electrostatic Discharge
Peak pulse current
IR
Reverse current
LCD
MP3
PPK
RDYN
RoHs
STB
TA
Liquid Crystal Display
Audio player device based on MPEG Audio Layer III
Peak pulse power
Dynamic resistance
Restriction of Hazardous Substance directive
Set-Top-Box
Ambient temperature
TOP
tp
Operation temperature
Pulse duration
Tstg
Storage temperature
VBR
VCL
Breakdown voltage
Reverse clamping voltage
Electrostatic discharge voltage
Reverse voltage
VESD
VR
VRWM
Reverse working voltage maximum
Final Data Sheet
15
Revision 1.0, 2011-04-08
ESD5V3S1B-02LS
Predefined Names
Predefined Names
Name
X-GOLD
XMM
Initial Cross-Reference
X-GOLD
XMM
-----------------------------------------------------------------------------
Definition of “Predefined Names”
Frequently used expressions, such as component names, file names, tools releases, version numbers, proprietary
variables and software links, can be used in a similar way as user variables. However, they must be listed in a
special table and not in the standard file “Variables”.
Correct Usage
Steps:
1. Insert all expressions into the left column of the above table.
2. Insert an initial Cross-Reference into the right column of the same row. The initial Cross-Reference is
necessary to ensure that a single ID is used in all your documents using the “Predefined_Names.fm” file
(Example: X-GOLD has the unique ID = CHDGHJGH).
3. Insert a Cross-Reference (Element “CrossReference”) into your document to the Element Identifier of the
“Predefined_Names.fm” file. Set the output format of the Cross-Reference to “Variable” (example: X-GOLD).
Notes
1. All documents in a project (such as XMM) and within a book should use the same file “Predefined Names”.
This allows copying content between different documents. For this reason, local versions of “Predefined
Names” must not be produced.
2. New definitions must be inserted in a new row. Never change existing definitions, as they might be used in
other documents.
3. This file does not need to be included in your book, but it must be in the fm sub-folder of your document.
4. You can sort the above table with FrameMaker only if the initial cross-reference in the right column has been
properly inserted. Otherwise, the table may only be sorted by hand, as the cross-references to your document
would get lost.
Final Data Sheet
16
Revision 1.0, 2011-04-08
w w w . i n f i n e o n . c o m
Published by Infineon Technologies AG
相关型号：
ESD5V3U1U-02LRH-E6327
Trans Voltage Suppressor Diode, 5.3V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, TSLP-2-7, 2 PIN
INFINEON
ESD5V3U1U-02LS-E6327
Trans Voltage Suppressor Diode, 5.3V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, TSSLP-2-1, 2 PIN
INFINEON
ESD5V3U2U-03LRH-E6327
Trans Voltage Suppressor Diode, 5.3V V(RWM), Unidirectional, 2 Element, Silicon, ROHS COMPLIANT, TSLP-3-7, 3 PIN
INFINEON
©2020 ICPDF网 联系我们和版权申明