UCC12041-Q1 [TI]
具有集成变压器的汽车类 500mW 3kVrms 隔离式直流/直流模块;型号: | UCC12041-Q1 |
厂家: | TEXAS INSTRUMENTS |
描述: | 具有集成变压器的汽车类 500mW 3kVrms 隔离式直流/直流模块 变压器 |
文件: | 总31页 (文件大小:2050K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UCC12041-Q1
ZHCSO87 –JUNE 2021
UCC12041-Q1 高效、低EMI、3kVRMS Basic 隔离式直流/直流转换器
1 特性
2 应用和用途
• 采用集成变压器技术的高效直流/直流转换器
• 具有符合AEC-Q100 标准的下列特性:
– 器件温度等级1:–40°C 至125°C 的工作环境
温度范围
• 提供功能安全型
• 车载充电器
• 电池管理系统
• 牵引逆变器
• 用于HEV/EV 的直流/直流转换器
3 说明
– 可帮助进行功能安全系统设计的文档
• 输出功率(典型值):500mW
• 5V 或3.3V 稳压输出,具有可选的400mV 净空电
压为LDO 供电
• 输入电压:4.5V 至5.5V
• 稳健可靠的隔离栅:
UCC12041-Q1 是一款具有 3kVRMS basic 隔离额定值
的汽车级直流/直流电源模块,旨在为需要偏置电源及
稳压输出电压的隔离电路提供有效的隔离电源。该器件
集成了具有专有架构的变压器和直流/直流控制器,可
提供500mW(典型值)的隔离功率,并具有低EMI。
UCC12041-Q1 集成了保护功能以增强系统稳健性。该
器件还具有使能引脚、同步功能以及 5V 或 3.3V 稳压
输出选项(带净空电压)。UCC12041-Q1 是一种薄
型、小型化解决方案,采用高度为 2.65mm(典型值)
的宽体SOIC 封装。
– 隔离等级:3kVRMS
– 浪涌能力:6.5kVPK
– 工作电压:850VRMS
– 最低CMTI:100V/ns
• 热关断
• 短路恢复
• 16 引脚宽体SOIC 封装,爬电距离和间隙大于
8mm
• 工作温度范围:–40°C 至125°C
• 安全相关认证(计划):
器件信息(1)
封装尺寸(标称值)
器件型号
封装
UCC12041-Q1
DVE SOIC (16)
10.30mm × 7.50mm
(1) 如需了解所有可用封装,请参阅数据表末尾的可订购产品附
录。
– DIN V VDE V 0884-11:2017-01
– 符合UL 1577 标准且长达1 分钟的3000VRMS
隔离
– 符合IEC 60950-1 和IEC 62368-1 终端设备标
准的UL 认证
– 符合GB4943.1-2011 的CQC 认证
70
60
50
40
30
VINP
VISO
GNDS
SEL
ON
CIN
COUT
EN
OFF
GNDP
SYNC
SYNC_OK
20
VISO = 5.4 V
VISO = 5.0 V
VISO = 3.7 V
VISO = 3.3 V
简化版应用
10
0
0
20
40
60 80
Load Current (mA)
100
120 140
D021
VINP = 5.0V
TA = 25°C
典型效率与负载间的关系
本文档旨在为方便起见,提供有关TI 产品中文版本的信息,以确认产品的概要。有关适用的官方英文版本的最新信息,请访问
www.ti.com,其内容始终优先。TI 不保证翻译的准确性和有效性。在实际设计之前,请务必参考最新版本的英文版本。
English Data Sheet: SLUSEE6
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
Table of Contents
7.2 Functional Block Diagram.........................................14
7.3 Feature Description...................................................14
7.4 Device Functional Modes..........................................16
8 Application and Implementation..................................17
8.1 Application Information............................................. 17
8.2 Typical Application.................................................... 17
9 Power Supply Recommendations................................23
10 Layout...........................................................................23
10.1 Layout Guidelines................................................... 23
10.2 Layout Example...................................................... 24
11 Device and Documentation Support..........................25
11.1 Device Support........................................................25
11.2 Documentation Support.......................................... 25
11.3 接收文档更新通知................................................... 25
11.4 支持资源..................................................................25
11.5 Trademarks............................................................. 25
11.6 Electrostatic Discharge Caution..............................25
11.7 术语表..................................................................... 25
12 Mechanical and Packaging Information....................25
1 特性................................................................................... 1
2 应用和用途.........................................................................1
3 说明................................................................................... 1
4 Revision History.............................................................. 2
5 Pin Configuration and Functions...................................3
6 Specifications.................................................................. 4
6.1 Absolute Maximum Ratings........................................ 4
6.2 ESD Ratings............................................................... 4
6.3 Recommended Operating Conditions.........................4
6.4 Thermal Information....................................................4
6.5 Power Ratings.............................................................5
6.6 Insulation Specifications............................................. 5
6.7 Safety-Related Certifications...................................... 6
6.8 Safety Limiting Values.................................................6
6.9 Electrical Characteristics.............................................7
6.10 Switching Characteristics..........................................8
6.11 Insulation Characteristics Curves..............................9
6.12 Typical Characteristics............................................10
7 Detailed Description......................................................14
7.1 Overview...................................................................14
4 Revision History
DATE
REVISION
NOTES
June 2021
*
Initial release
Copyright © 2022 Texas Instruments Incorporated
2
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
5 Pin Configuration and Functions
1
16
15
14
13
12
11
10
9
GNDS
GNDS
VISO
SEL
EN
GNDP
VINP
2
3
4
5
6
7
8
SYNC
SYNC_OK
NC
NC
NC
NC
NC
NC
GNDS
图5-1. DVE Package 16-Pin SOIC Top View
表5-1. Pin Functions
PIN
TYPE (1)
DESCRIPTION
NAME
EN
NO.
Enable pin. Forcing EN low disables the device. Pull high to enable normal device
functionality.
1
I
GNDP
2
9
P
Power ground return connection for VINP.
Connect to GNDS plane on printed circuit board. Do not use as only ground connection for
VISO. Ensure pin 15 is connected to circuit ground.
GNDS
GNDS
P
P
16
Secondary side ground return connection for VISO. Connect bypass capacitor from VISO to
this pin.
15
6
7
Pins internally connected together. No other electrical connection. Pins belong to primary-
side voltage domain. Connect to GNDP on printed circuit board.
—
—
I
8
NC
10
11
12
No internal connection. Pin belongs to isolated voltage domain. Connect to GNDS on printed
circuit board.
Synchronous clock input pin. Provide a clock signal to synchronize multiple UCC12041-Q1
devices or connect to GNDP for standalone operation using the internal oscillator. If the
SYNC pin is left open make sure to it separate it from any switching noise to avoid false
clock coupling.
SYNC
4
5
Active-low, open-drain diagnostic output. Pin is asserted LOW if there is no external SYNC
clock or one that is outside of the operating range of the UCC12041-Q1 is detected. In this
state, the external clock is ignored and the DC/DC converter is clocked by the internal
oscillator. The pin is in high-impedance if a clock is applied on SYNC.
SYNC_OK
O
I
VISO selection pin. VISO setpoint is 5.0 V when SEL is shorted to VISO, 5.4 V when SEL is
connected to VISOthrough a 100-kΩresistor, 3.3 V when SEL is shorted to GNDS, and 3.7 V
when SEL is connected to GNDS through a 100-kΩresistor. For more information see the
节7.4 section.
SEL
13
Primary side input supply voltage pin. A 10-μF ceramic capacitor to GNDP on pin 2, placed
close to the device pins, is required.
VINP
VISO
3
P
P
Isolated supply voltage pin. A 10-μF ceramic capacitor to GNDS on pin 15, placed close to
the device pins, is required. See 节8.2.2.1 section.
14
(1) P = Power, G = Ground, I = Input, O = Output
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
3
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)
MIN
MAX
UNIT
VINP to GNDP
6.0
V
–0.3
VINP + 0.3,
EN, SYNC, SYNC_OK, to GNDP
VISO to GNDS
V
V
V
–0.3
–0.3
–0.3
≤6.0
6.0
VISO + 0.3,
SEL to GNDS
≤6.0
(2)
VISO output power at Ta = 25°C, POUT_MAX
675
150
150
mW
°C
Operating junction temperature range, TJ
Storage temperature, Tstg
–40
–65
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under
Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability.
(2) See the VISO Load Recommended Operating Area section for maximum rated values across temperature and VINP conditions for
each different VISO output mode.
6.2 ESD Ratings
VALUE
±3000
±1000
UNIT
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)
V(ESD)
Electrostatic discharge
V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2)
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN
4.5
0
NOM
MAX
5.5
UNIT
V
VINP
Primary side supply voltage
EN pin input voltage
5.0
VEN
5.5
V
VSYNC
VSYNC-OK
VISO
VSEL
fSYNC
PVISO
Ta
SYNC pin input voltage
0
5.5
V
SYNC_OK pen drain pin voltage
Isolated power supply voltage
Input voltage
0
5.5
V
0
5.7
V
0
5.7
V
External DC/DC converter synchronization signal frequency
VISO output power at Ta = 25°C (1)
Ambient temperature
14.4
16.0
17.6
500
125
150
MHz
mW
°C
°C
–40
–40
TJ
Junction temperature
(1) See the 节7.3.3 section for maximum rated values across temperature and VINP conditions for each different VISO output mode.
6.4 Thermal Information
UCC12041-Q1
THERMAL METRIC(1)
DVE (SOIC)
16 PINS
57.5
UNIT
RθJA
RθJC(top)
RθJB
ψJT
Junction-to-ambient thermal resistance
°C/W
°C/W
°C/W
°C/W
°C/W
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
21.6
33.8
Junction-to-top characterization parameter
Junction-to-board characterization parameter
10.2
33.7
ψJB
Copyright © 2022 Texas Instruments Incorporated
4
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.4 Thermal Information (continued)
UCC12041-Q1
THERMAL METRIC(1)
DVE (SOIC)
16 PINS
—
UNIT
RθJC(bot)
Junction-to-case (bottom) thermal resistance
°C/W
(1) The value of RθJA given in this table is only valid for comparison with other packages and can not be used for design purposes. This
value was calculated in accordance with JESD 51-7, and simulated on a 4-layer JEDEC board when PDP = 129 mW, PDS = 142 mW
and PDT = 129 mW. The board temperature is taken from Pin 12.For more information about traditional and new thermal metrics, see
the Semiconductor and IC Package Thermal Metrics application report.
6.5 Power Ratings
VINP = 5.0 V, CINP = COUT = 10 µF, TJ = 150°C, Internal Clock mode
PARAMETER
TEST CONDITIONS
VALUE
460
UNIT
mW
mW
mW
mW
PD
Power dissipation
PDP
PDS
PDT
Power dissipation by driver side (primary)
Power dissipation by rectifier side (secondary)
Power dissipation by transformer
148
SEL connected to GNDS (3.3-V VISO output mode),
IISO = 135 mA
164
148
6.6 Insulation Specifications
PARAMETER
TEST CONDITIONS
VALUE
UNIT
GENERAL
CLR
CPG
External clearance(1)
External creepage(1)
Shortest terminal-to-terminal distance through air
> 8
> 8
mm
mm
Shortest terminal-to-terminal distance across the package
surface
DTI
CTI
Distance through the insulation
Comparative tracking index
Material group
Minimum internal gap (internal clearance)
DIN EN 60112 (VDE 0303-11); IEC 60112
According to IEC 60664-1
> 120
> 600
I
µm
V
I-IV
I-IV
I-III
Rated mains voltage ≤300 VRMS
Rated mains voltage ≤600 VRMS
Rated mains voltage ≤1000 VRMS
Overvoltage Category
DIN V VDE V 0884-11:2017-01 (2) (Planned Certification Targets)
VIORM
Maximum repetitive peak isolation voltage
AC voltage (bipolar)
1202
850
VPK
VRMS
VDC
AC voltage (sine wave) Time dependent dielectric breakdown
(TDDB) test
VIOWM
Maximum working isolation voltage
DC voltage
1202
4243
VTEST = VIOTM, t = 60s (qualification);
VTEST = 1.2 × VIOTM, t = 1s (100% production)
VIOTM
VIOSM
Maximum transient isolation voltage
Maximum surge isolation voltage(3)
VPK
Test method per IEC 62368-1, 1.2/50 µs waveform,
VTEST = 1.3 × VIOSM = 6500 VPK (qualification)
5000
VPK
Method a: After I/O safety test subgroup 2/3,
Vini = VIOTM, tini = 60 s;
≤5
Vpd(m) = 1.2 × VIORM = 1442 VPK, tm = 10 s
Method a: After environmental tests subgroup 1,
Vini = VIOTM, tini = 60 s;
Vpd(m) = 1.2 × VIORM = 1442 VPK, tm = 10 s
≤5
≤5
qpd
Apparent charge(4)
pC
Method b1: At routine test (100% production) and
preconditioning (type test)
Vini = 1.2 × VIOTM, tini = 1 s;
Vpd(m) = 1.5 × VIORM = 1803 VPK, tm = 1 s
CIO
RIO
Barrier capacitance, input to output(5)
Isolation resistance, input to output(5)
3.5
> 1012
> 1011
> 109
pF
VIO = 0.4 sin (2πft), f = 1 MHz
VIO = 500 V, TA = 25°C
VIO = 500 V, 100°C ≤TA ≤125°C
VIO = 500 V at TS = 150°C
Ω
Pollution degree
Climatic category
2
40/125/21
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
5
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.6 Insulation Specifications (continued)
PARAMETER
TEST CONDITIONS
VALUE
UNIT
UL 1577 (Planned Certification Target)
VTEST = VISO = 3000 VRMS, t = 60 s (qualification); VTEST = 1.2
× VISO = 3600 VRMS, t = 1 s (100% production)
VISO
Withstand isolation voltage
3000
VRMS
(1) Creepage and clearance requirements should be applied according to the specific equipment isolation standards of an application.
Care should be taken to maintain the creepage and clearance distance of a board design to ensure that the mounting pads of the
isolator on the printed-circuit board do not reduce this distance. Creepage and clearance on a printed-circuit board become equal in
certain cases. Techniques such as inserting grooves and/or ribs on a printed circuit board are used to help increase these
specifications.
(2) This coupler is suitable for basic insulation only within the maximum operating ratings. Compliance with the safety ratings are ensured
by means of suitable protective circuits.
(3) Testing is carried out in air or oil to determine the intrinsic surge immunity of the isolation barrier.
(4) Apparent charge is electrical discharge caused by a partial discharge (pd).
(5) All pins on each side of the barrier tied together creating a two-terminal device.
6.7 Safety-Related Certifications
VDE
UL
UL
CQC
Plan to certify according to DIN V
VDE V 0884-11:2017- 01
Plan to certify according to IEC
60950-1 and IEC 62368-1
Plan to certify under UL 1577
Component Recognition Program
Plan to certify according to
GB4943.1-2011
Basic insulation per UL
Basic insulation Maximum transient
isolation voltage, 4243 VPK;
Maximum repetitive peak isolation
voltage, 1202 VPK; Maximum surge
isolation voltage, 5000 VPK
60950-1-07+A1+A2, IEC 60950-1
2nd Ed.+A1+A2, UL 62368-1- 14
and IEC 62368-1 2nd Ed., 850
VRMS maximum working voltage
(pollution degree 1, material group I)
Basic insulation, Altitude ≤5000 m,
Tropical Climate, 595 VRMS maximum
working voltage
Single protection, 3000 VRMS
File number: (planned)
Certificate number: (planned)
Master contract number: (planned)
Certificate number: (planned)
6.8 Safety Limiting Values
Safety limiting intends to minimize potential damage to the isolation barrier upon failure of input or output circuitry, resulting in
zero power delivered to VISO and all the power being dissipated inside the device.
PARAMETER
TEST CONDITIONS
MAX
UNIT
R
θJA = 57.5°C/W, VI = 5.5 V, TJ = 150°C, TA = 25°C
395
(see 图6-2)
θJA = 57.5°C/W, VI = 4.5 V, TJ = 150°C, TA = 25°C
(see 图6-2)
θJA = 57.5°C/W, TJ = 150°C, TA = 25°C (see 图6-3)
IS
Safety input current (1)
mA
R
483
PS
TS
Safety input power
2174
150
mW
°C
R
Safety temperature (1)
(1) The maximum safety temperature, TS, has the same value as the maximum junction temperature, TJ, specified for the device. The IS
and PS parameters represent the safety current and safety power respectively. The maximum limits of IS and PS should not be
exceeded. These limits vary with the ambient temperature, TA.
The junction-to-air thermal resistance, RθJA, in the Thermal Information table is that of a device installed on a high-K test board for
leaded surface-mount packages. Use these equations to calculate the value for each parameter:
TJ = TA + RθJA × P, where P is the power dissipated in the device.
TJ(max) = TS = TA + RθJA × PS, where TJ(max) is the maximum allowed junction temperature.
PS = IS × VI, where VI is the maximum input voltage.
Copyright © 2022 Texas Instruments Incorporated
6
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.9 Electrical Characteristics
Over operating temperature range (TJ = –40°C to 150°C), VINP = 4.5V to 5.5V, CINP = COUT = 10 µF, internal clock mode,
unless otherwise noted. All typical values at TA = 25°C and VINP = 5.0V.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
INPUT SUPPLY
IVINQ
VINP quiescent current,disabled
EN=LOW
100
80
uA
EN=HI; SEL shorted to VISO (5.0-V output)
EN=HI; SEL 100 kΩto VISO (5.4-V output)
EN=HI; SEL shorted to GNDS (3.3-V output)
EN=HI; SEL 100 kΩto GNDS (3.7-V output)
52
48
96
82
70
IVINO
VINP operating current, no load
mA
140
120
DC current from VINP supplyunder
short circuit on VISO
IVIN_SC
VUVPR
VUVPF
VUVPH
VISO short to GNDS
245
4.25
3.75
0.5
mA
V
VINP under-voltage lockout rising
threshold
4.45
VINP under-voltage lockout falling
threshold
3.5
0.8
V
VINP under-voltage lockout
hysteresis
V
EN, SYNC INPUT PINS
VIR
Input voltage threshold, logic HIGH Rising edge
Input voltage threshold, logic LOW Falling edge
2.2
V
V
VIF
IEN
Enable Pin Input Current
SYNC Pin Input Current
VEN = 5.0 V
5
10
1
uA
uA
ISYNC
VSYNC = 5.0 V
0.02
SYNC_OK PIN
VOL
SYNC_OK output low voltage
SYNC_OK pin leakage current
0.15
V
ISYNC_OK = –2 mA
ILKG_SYNC_OK
VSYNC_OK = 5.0 V
1
uA
DC/DC CONVERTER
SEL shorted to VISO (5.0-V output); IISO = 55
mA (3)
4.8
5.18
3.17
3.55
5
5.4
3.3
3.7
5.2
5.62
3.43
3.85
V
V
V
V
SEL 100 kΩto VISO (5.4-V output); IISO = 45
mA (3)
VISO
Isolated supply output voltage
SEL shorted to GNDS (3.3-V output); IISO
100 mA (3)
=
SEL 100kΩto GNDS (3.7-V output); IISO
=
90 mA (3)
20-MHz bandwidth, CLOAD = 10 uF || 0.1 uF,
SEL shorted to VISO (5.0-V output); IISO
100 mA
=
50
50
50
50
mV
mV
mV
mV
20-MHz bandwidth, CLOAD = 10 uF || 0.1 uF,
SEL 100 kΩ to VISO (5.4-V output); IISO = 90
mA
Voltage ripple on isolated supply
output (pk-pk)(1)
VISO(RIP)
20-MHz bandwidth, CLOAD = 10 uF || 0.1 uF,
SEL shorted to GNDS (3.3-V output); IISO
145 mA
=
20-MHz bandwidth, CLOAD = 10 uF || 0.1 uF,
SEL shorted to GNDS (3.7-V output); IISO
130 mA
=
SEL shorted to VISO (5.0-V output); IISO = 55
mA, VINP = 4.5 V to 5.5 V
1%
1%
VISO(LINE)
VISO DC line regulation
SEL shorted to GNDS (3.3-V output); IISO
100 mA, VINP = 4.5 V to 5.5 V
=
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
7
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.9 Electrical Characteristics (continued)
Over operating temperature range (TJ = –40°C to 150°C), VINP = 4.5V to 5.5V, CINP = COUT = 10 µF, internal clock mode,
unless otherwise noted. All typical values at TA = 25°C and VINP = 5.0V.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
SEL shorted to VISO (5.0-V output); IISO = 0
to 100 mA
1.5%
VISO(LOAD)
VISO DC load regulation
SEL shorted to GNDS (3.3-V output); IISO = 0
to 145 mA
1.5%
60%
60%
50%
53%
750
SEL shorted to VISO (5.0-V output); IISO
100 mA
=
SEL 100 kΩto VISO (5.4-V output); IISO = 90
mA
Efficiency at maximum
recommended load (2)
EFF
SEL shorted to GNDS (3.3-V output); IISO
145 mA
=
=
SEL 100 kΩto GNDS (3.7-V output); IISO
130 mA
EN = change from LO to HI, SEL shorted to
VISO (5.0-V output); IISO = 1 mA
1000
500
µs
µs
tRISE
VISO rise time, 10% - 90%
EN = change from LO to HI, SEL 100 kΩto
GNDS (3.3-V output); IISO = 1 mA
300
THERMAL SHUTDOWN
TSDTHR
Thermal shutdown threshold(1)
Thermal shutdown hysteresis(1)
Junction Temperature, Rising
Junction Temperature, Falling
165
27
°C
°C
TSDHYST
(1) Not tested in production. Ensured by characterization.
(2) Efficiency calculation: EFF = (VISO × IISO) / (VINP × IINP).
(3) See the VISO Load Recommended Operating Area section for discussion of VISO regulation across load and temperature conditions
for all output voltage settings.
6.10 Switching Characteristics
Over operating temperature range (TJ = –40°C to 150°C), VINP = 4.5V to 5.5V, CINP = COUT = 10 µF, internal clock mode,
unless otherwise noted. All typical values at TA = 25°C and VINP = 5.0V.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
fSW_INT
CMTI
DC/DC Converter Clock
Internal clock mode
8
MHz
Static common-mode transient
immunity(1)
Slew Rate of GNDP versus GNDS, VCM
1000 V
=
100
V/ns
(1) Not tested in production. Ensured by characterization.
Copyright © 2022 Texas Instruments Incorporated
8
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.11 Insulation Characteristics Curves
>>100 Yrs
1.E+12
>>100
1.E+11
Yrs
87.5%
1.E+10
1.E+09
1.E+08
1.E+07
1.E+06
TDDB Line (< 1 ppm fail rate)
Operating Zone
VDE Safety Margin Zone
20 %
1.E+05
1.E+04
1.E+03
1.E+02
1.E+01
500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500
Applied Voltage (VRMS
)
Working isolation voltage = 850 VRMS
TA up to 150°C
Projected insulation lifetime = 11840 years
Applied voltage frequency = 60 Hz
图6-1. Insulation Lifetime Projection Data
500
450
400
350
300
250
200
150
100
50
2250
VINP=4.5V
VINP=5.5V
2000
1750
1500
1250
1000
750
500
250
0
0
0
20
40
60
80
100
Ambient Temperature (ºC)
120
140
160
0
20
40
60
80
100
Ambient Temperature (ºC)
120
140
160
图6-2. Thermal Derating Curve for Safety Limiting
图6-3. Thermal Derating Curve for Safety Limiting
Current per VDE
Power per VDE
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
9
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.12 Typical Characteristics
700
650
600
550
500
450
400
350
300
250
200
700
650
600
550
500
450
400
350
300
250
200
150
100
50
150
VINP = 5.5 V
VINP = 5.0 V
VINP = 4.5 V
VINP = 5.5 V
VINP = 5.0 V
VINP = 4.5 V
100
50
0
0
-40 -20
0
20
Ambient Temperature (ºC)
40
60
80 100 120 140 160
-40 -20
0
20
Ambient Temperature (ºC)
40
60
80 100 120 140 160
D022
D023
VISO = 5.0 V
VISO = 5.4 V
图6-4. Maximum VISO Output Power vs. Temperature
图6-5. Maximum VISO Output Power vs. Temperature
600
550
500
450
400
350
300
250
200
150
650
600
550
500
450
400
350
300
250
200
150
VINP = 5.5 V
VINP = 5.0 V
VINP = 4.5 V
VINP = 5.5 V
VINP = 5.0 V
VINP = 4.5 V
100
50
0
100
50
0
-40 -20
0
20
Ambient Temperature (ºC)
40
60
80 100 120 140 160
-40 -20
0
20
Ambient Temperature (ºC)
40
60
80 100 120 140 160
D024
D025
VISO = 3.3 V
VISO = 3.7 V
图6-6. Maximum VISO Output Power vs. Temperature
图6-7. Maximum VISO Output Power vs. Temperature
140
140
120
100
80
120
100
80
60
60
40
40
VINP = 5.5 V
VINP = 5.0 V
VINP = 4.5 V
VINP = 5.5 V
VINP = 5.0 V
VINP = 4.5 V
20
20
0
-40 -20
0
-40 -20
0
20
Ambient Temperature (ºC)
40
60
80 100 120 140 160
0
20
Ambient Temperature (ºC)
40
60
80 100 120 140 160
D026
D027
VISO = 5.0 V
VISO = 5.4 V
图6-8. Maximum VISO Output Current vs. Temperature
图6-9. Maximum VISO Output Current vs. Temperature
Copyright © 2022 Texas Instruments Incorporated
10
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.12 Typical Characteristics (continued)
180
160
140
120
100
80
180
160
140
120
100
80
60
60
40
40
VINP = 5.5 V
VINP = 5.0 V
VINP = 4.5 V
VINP = 5.5 V
VINP = 5.0 V
VINP = 4.5 V
20
0
20
0
-40 -20
0
20
Ambient Temperature (ºC)
40
60
80 100 120 140 160
-40 -20
0
20
Ambient Temperature (ºC)
40
60
80 100 120 140 160
D028
D029
VISO = 3.3 V
VISO = 3.7 V
图6-10. Maximum VISO Output Current vs. Temperature
图6-11. Maximum VISO Output Current vs. Temperature
70
70
60
50
40
30
20
10
0
60
50
40
30
20
10
0
0
10
20
30
40
Load Current (mA)
50
60
70
80
90 100
0
10
20
30
40
Load Current (mA)
50
60
70
80
90 100
D006
D008
VINP = 5.0 V
VISO = 5.0 V
TA = 25°C
VINP = 5.0 V
VISO = 5.4 V
TA = 25°C
图6-12. Power Supply Efficiency vs Load Current (IISO
)
图6-13. Power Supply Efficiency vs Load Current (IISO
)
60
60
50
40
30
20
10
0
50
40
30
20
10
0
0
20
40
60
Load Current (mA)
80
100
120
140
0
20
40
60
Load Current (mA)
80
100
120
140
D007
D009
VINP = 5.0 V
VISO = 3.3 V
TA = 25°C
VINP = 5.0 V
VISO = 3.7 V
TA = 25°C
图6-14. Power Supply Efficiency vs Load Current (IISO
)
图6-15. Power Supply Efficiency vs Load Current (IISO)
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
11
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.12 Typical Characteristics (continued)
5.1
5.5
5.45
5.4
VINP = 4.5 V
VINP = 5.0 V
VINP = 5.5 V
VINP = 4.5 V
VINP = 5.0 V
VINP = 5.5 V
5.05
5
4.95
4.9
5.35
5.3
0
10
20
30
40
Load Current (mA)
50
60
70
80
90 100
0
10
20
30
40
Load Current (mA)
50
60
70
80
90 100
D012
D013
VISO = 5.0 V
TA = 25°C
VISO = 5.4 V
TA = 25°C
图6-16. Isolated Supply Voltage (VISO) vs Load Current (IISO
)
图6-17. Isolated Supply Voltage (VISO) vs Load Current (IISO
)
3.4
3.8
VINP = 4.5 V
VINP = 5.0 V
VINP = 5.5 V
VINP = 4.5 V
VINP = 5.0 V
VINP = 5.5 V
3.35
3.3
3.75
3.7
3.65
3.6
3.25
3.2
0
20
40
60
80
Load Current (mA)
100
120
140
0
20
40
60
80
Load Current (mA)
100
120
140
D010
D011
VISO = 3.7 V
TA = 25°C
VISO = 3.3 V
TA = 25°C
图6-19. Isolated Supply Voltage (VISO) vs Load Current (IISO
)
图6-18. Isolated Supply Voltage (VISO) vs Load Current (IISO
)
5.20
5.60
5.50
5.40
5.30
5.20
5.10
5.00
4.90
4.80
-40
-20
0
20
Free-Air Temperature (ºC)
40
60
80
100 120 140
-40
-20
0
20
Free-Air Temperature (ºC)
40
60
80
100 120 140
D014
D015
VINP = 5.0 V
VISO = 5.0 V
IISO = 50 mA
VINP = 5.0 V
VISO = 5.4 V
IISO = 50 mA
图6-20. Isolated Supply Voltage (VISO) vs Free-Air Temperature 图6-21. Isolated Supply Voltage (VISO) vs Free-Air Temperature
Copyright © 2022 Texas Instruments Incorporated
12
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
6.12 Typical Characteristics (continued)
3.50
3.90
3.80
3.70
3.60
3.50
3.40
3.30
3.20
3.10
-40
-20
0
20
Free-Air Temperature (ºC)
40
60
80
100 120 140
-40
-20
0
20
Free-Air Temperature (ºC)
40
60
80
100 120 140
D017
D016
VINP = 5.0 V
VISO = 3.3 V
IISO = 75 mA
VINP = 5.0 V
VISO = 3.7 V
IISO = 75 mA
图6-22. Isolated Supply Voltage (VISO) vs Free-Air Temperature 图6-23. Isolated Supply Voltage (VISO) vs Free-Air Temperature
280
260
240
220
200
250
200
150
100
50
VISO = 3.3 V
VISO = 3.7 V
VISO = 5.0 V
VISO = 5.4 V
0
4.5 4.6 4.7 4.8 4.9
5
Input Suppy Voltage (V)
5.1 5.2 5.3 5.4 5.5
0
20
40
60
80
100
Load Current (mA)
120
140
160
D018
D019
TA = 25°C
图6-24. Short-Circuit Supply Current (IVIN_SC) vs Supply Voltage
VINP = 5.0 V
TA = 25°C
图6-25. Input Supply Current (IVINP) vs Load Current (IISO
)
(VINP
)
4.5
4.4
4.3
4.2
4.1
4
3.9
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.1
3
Falling Threshold
RisingThreshold
-40
-20
0
20
40 60
Temperature (ºC)
80
100 120 140
图6-26. Typical VINP UVLO Threshold vs Junction Temperature (TJ)
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
13
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
7 Detailed Description
7.1 Overview
The UCC12041-Q1 device integrates a high-efficiency, low-emissions isolated DC/DC converter. This approach
provides typically 500 mW of clean, steady power across a 3000-VRMS basic isolation barrier.
The integrated DC/DC converter uses switched mode operation and proprietary circuit techniques to reduce
power losses and boost efficiency. Specialized control mechanisms, clocking schemes, and the use of an on-
chip transformer provide high efficiency and low radiated emissions.
The VINP supply is provided to the primary power controller that switches the power stage connected to the
integrated transformer. Power is transferred to the secondary side, rectified, and regulated to a level set by the
SEL pin condition.
A fast feedback control loop monitors VISO and the output load, and ensures low overshoots and undershoots
during load transients. Undervoltage lockout (UVLO) with hysteresis is integrated on the VINP supply, which
ensures robust system performance under noisy conditions.
UCC12041-Q1 is suitable for applications that have limited board space and require more integration. These
devices are also suitable for very-high voltage applications, where power transformers meeting the required
isolation specifications are bulky and expensive.
7.2 Functional Block Diagram
VINP
Control
SEL
UVLO
EN
VISO
Transformer
Rectifier
OSC
÷ 2
Driver
GNDS
SYNC
SYNC_OK
GNDP
Ext CLK
Detect
7.3 Feature Description
7.3.1 Enable and Disable
Forcing EN low disables the device, which greatly reduces the VINP power consumption. Pull the EN pin high to
enable normal device functionality. The EN pin has a weak internal pull-down resistor, so the device floats to the
disable state if the pin is left open.
7.3.2 UVLO, Power-Up, and Power-Down Behavior
The UCC12041-Q1 has an undervoltage lockout (UVLO) on the VINP power supply. Upon power-up, while the
VINP voltage is below the threshold voltage VUVPR, the primary side transformer driver is disabled, and VISO
output is off. The output powers up once the threshold is met. Likewise, if VINP falls below VUVPF, the converter
is disabled and there is no output at VISO. Both UVLO threshold voltages have hysteresis to avoid chattering.
Copyright © 2022 Texas Instruments Incorporated
14
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
7.3.3 VISO Load Recommended Operating Area
图 7-1 depicts the device VISO regulation behavior across the output load range, including when the output is
overloaded. For proper device operation, ensure that the device VISO output load does not exceed the
maximum output current (IOUT_MAX). The value for IOUT_MAX over different temperature and VINP conditions are
shown from 图 6-8 to 图 6-11. The following protection mechanisms will be engaged if the UCC12041-Q1 is
loaded beyond the recommended operating area:
1. The device limits the maximum output power. If a load exceeding IOUT_MAX is applied, VISO drops accordingly
to meet the maximum power limit.
2. If VISO drops below nominal 3.8 V while operating in the constant power limit region, the over-power fold-
back feature will switch the power converter from active rectification to passive rectification, and the built-in
recovery hysteresis will ensure the UCC12041-Q1 recovers at a lower output power. The device returns to
active rectification when load drops and VISO increases above nominal 4.3 V.
3. The device triggers a soft-start reset if VISO drops below the nominal 1.8-V threshold. This reset is designed
to protect the device during VISO short-circuit conditions.
4. Thermal shutdown protection disables the converter if the device is operated in any of the above regions
long enough to raise the silicon junction temperature above the thermal shutdown threshold. See the 节
7.3.4 section for more details on this device feature.
VISO
1
Constant Power Limit
VISO_SET
Active Rectification
2
Passive Rectification
Recommended
Operating
Area
Reset Threshold
3
Overload
Protection
IOUT_MAX
IOUT
图7-1. VISO Load Recommended Operating Area Description
7.3.4 Thermal Shutdown
Thermal protection is also integrated to help prevent the device from getting damaged during overload and
short-circuit conditions on the isolated output. Under these conditions, the device temperature starts to increase.
When the silicon junction temperature Tj sensed at the primary side die goes above the threshold
TSDTHR(typical 165°C), thermal shutdown activates and the primary controller turns off which removes the
energy supplied to the VISO load, which causes the device to cool off. When the junction temperature drops
approximately 27°C (TSDHYST) from the shutdown point, the device starts to function normally. If an overload or
output short-circuit condition prevails, this protection cycle is repeated. Make sure the design prevents the device
junction temperatures from reaching such high values.
7.3.5 External Clocking and Synchronization
The UCC12041-Q1 has an internal oscillator trimmed to drive the transformer at 8.0 MHz. An external clock may
be applied at the SYNC pin to override the internal oscillator. This external clock will be divided by 2, so the
target range for the external clock signal at SYNC is 16 MHz ±10%. When a valid external clock signal is
detected, the internal spread spectrum modulation (SSM) algorithm is disabled. This allows an external clock
signal with a unique SSM to be applied. The depth and frequency of SSM is a tradeoff verses low frequency
modulated VISO voltage ripple. The SYNC_OK pin is asserted LOW if there is no external SYNC clock or one
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
15
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
that is outside of the operating range of the device is detected. In this state, the external clock is ignored and the
DC/DC converter is clocked by the internal oscillator. The pin is in high-impedance if a valid clock is applied on
SYNC.
7.3.6 VISO Output Voltage Selection
The SEL pin is monitored during power-up — within the first 1 ms after applying VINP above the UVLO rising
threshold or enabling via the EN pin — to detect the desired regulation voltage for the VISO output. Note that
after this initial monitoring, the SEL pin no longer affects the VISO output level. In order to change the output
mode selection, either the EN pin must be toggled or the VINP power supply must be cycled off and back on.
Section6.4 provides more details on the SEL pin functionality.
7.3.7 Electromagnetic Compatibility (EMC) Considerations
UCC12041-Q1 devices use spread spectrum modulation algorithm for the internal oscillator and advanced
internal layout scheme to minimize radiated emissions at the system level.
Many applications in harsh industrial environment are sensitive to disturbances such as electrostatic discharge
(ESD), electrical fast transient (EFT), surge and electromagnetic emissions. These electromagnetic disturbances
are regulated by international standards such as IEC 61000-4-x and CISPR 32. Although system-level
performance and reliability depends, to a large extent, on the application board design and layout, the device
incorporates many chip-level design improvements for overall system robustness.
7.4 Device Functional Modes
表7-1 lists the supply functional modes for this device.
表7-1. Device Functional Modes
INPUTS
Isolated Supply Output Voltage (VISO) Setpoint
EN
SEL
HIGH
HIGH
HIGH
HIGH
HIGH
LOW
Shorted to VISO
100 kΩto VISO
Shorted to GNDS
100 kΩto GNDS
OPEN(1)
5.0 V
5.4 V
3.3 V
3.7 V
UNSUPPORTED
0 V
X
(1) The SEL pin has an internal weak pull-down resistance to ground, but leaving this pin open is not recommended.
Copyright © 2022 Texas Instruments Incorporated
16
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
8 Application and Implementation
备注
以下应用部分中的信息不属于TI 器件规格的范围,TI 不担保其准确性和完整性。TI 的客 户应负责确定
器件是否适用于其应用。客户应验证并测试其设计,以确保系统功能。
8.1 Application Information
The UCC12041-Q1 device is suitable for applications that have limited board space and desire more integration.
This device is also suitable for very high voltage applications, where power transformers meeting the required
isolation specifications are bulky and expensive.
8.2 Typical Application
图8-1 shows the typical application schematic for the UCC12041-Q1 device supplying an isolated load.
10 mF 0.1 mF
0.1 mF
10 mF
Load
1
2
3
4
5
6
7
8
EN
GNDS 16
GNDS 15
VISO 14
SEL 13
NC 12
RPU
GNDP
VINP
SYNC
SYNC_OK
NC
RSEL
RSYNC
NC 11
NC
NC 10
NC
GNDS
9
图8-1. Typical Application
8.2.1 Design Requirements
To design using UCC12041-Q1, a few simple design considerations must be evaluated. 表 8-1 shows some
recommended values for a typical application. See Power Supply Recommendations and Layout sections to
review other key design considerations for the UCC12041-Q1.
表8-1. Design Parameters
PARAMETER
RECOMMENDED VALUE
4.5 V to 5.5 V
Input supply voltage, VINP
Decoupling capacitance between VINP and GNDP
10 µF, 16 V, ± 10%, X7R
10 µF, 16 V, ± 10%, X7R
0.1 µF, 50 V, ± 10%, X7R
100 kΩ
Decoupling capacitance between VISO and GNDS (1)
Optional additional capacitance on VISO or VINP to reduce high-frequency ripple
Pull-up resistor from SYNC_OK to VINP, RPU
Pull-up resistor from SEL to VISO for 5.0-V output voltage mode, RSEL
Pull-up resistor from SEL to VISO for 5.4-V output voltage mode, RSEL
0 Ω
100 kΩ
Match source —typical values are 50 Ω, 75 Ω,
100 Ω, or 1 kΩ
Optional SYNC signal impedance-matching resistor, RSYNC
External clock signal applied on SYNC
16 MHz
(1) See VISO Output Capacitor Selection section.
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
17
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
8.2.2 Detailed Design Procedure
Place ceramic decoupling capacitors as close as possible to the device pins. For the input supply, place the
capacitor(s) between pin 3 (VINP) and pin 2 (GNDP). For the isolated output supply, place the capacitor(s)
between pin 14 (VISO) and pin 15 (GNDS). This location is of particular importance to the input decoupling
capacitor, because this capacitor supplies the transient current associated with the fast switching waveforms of
the power drive circuits. The recommended capacitor value is 10 µF. Ensure the capacitor dielectric material is
compatible with the target application temperature.
8.2.2.1 VISO Output Capacitor Selection
The UCC12041-Q1 is optimized to run with an effective output capacitance of 5 µF to 20 µF. A ceramic capacitor
is recommended. Ceramic capacitors have DC-Bias and temperature derating effects, which both have influence
the final effective capacitance. Choose the right capacitor carefully in combination with considering its package
size, dielectric and voltage rating. It is good design practice to include one 0.1-µF capacitor close to the device
for high-frequency noise reduction.
Copyright © 2022 Texas Instruments Incorporated
18
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
8.2.3 Application Curves
Time (2.0 ms/div)
VISO = 5.4 V
Time (2.0 ms/div)
VISO = 5.4 V Bandwidth = 20 MHz
D033
D034
VINP = 5.0 V
Bandwidth = 20 MHz
VINP = 5.0 V
图8-2. VISO Ripple, 5.4-V Output, 10% Load
图8-3. VISO Ripple, 5.4-V Output, 90% Load
Time (2.0 ms/div)
Time (2.0 ms/div)
D035
D036
VINP = 5.0 V
VISO = 5.0 V
Bandwidth = 20 MHz
VINP = 5.0 V
VISO = 5.0 V
Bandwidth = 20 MHz
图8-4. VISO Ripple, 5.0-V Output, 10% Load
图8-5. VISO Ripple, 5.0-V Output, 90% Load
Time (2.0 ms/div)
Time (2.0 ms/div)
D037
D038
VINP = 5.0 V
VISO = 3.7 V
Bandwidth = 20 MHz
VINP = 5.0 V
VISO = 3.7 V
Bandwidth = 20 MHz
图8-6. VISO Ripple, 3.7-V Output, 10% Load
图8-7. VISO Ripple, 3.7-V Output, 90% Load
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
19
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
Time (2.0 ms/div)
VISO = 3.3 V
Time (2.0 ms/div)
VISO = 3.3 V Bandwidth = 20 MHz
D039
D040
VINP = 5.0 V
Bandwidth = 20 MHz
VINP = 5.0 V
图8-8. VISO Ripple, 3.3-V Output, 10% Load
图8-9. VISO Ripple, 3.3-V Output, 90% Load
VISO
IISO load
VISO
IISO load
Time (200 ms/div)
Time (200 ms/div)
D041
D042
图8-10. VISO Load Transient Response, 10% to
图8-11. VISO Load Transient Response, 90% to 10%
90% Load Step, 5.0-V Input, 5.4-V Output
Load Step, 5.0-V Input, 5.4-V Output
VISO
IISO load
VISO
IISO load
Time (200 ms/div)
Time (200 ms/div)
D043
D044
图8-12. VISO Load Transient Response, 10% to
图8-13. VISO Load Transient Response, 90% to
90% Load Step, 5.0-V Input, 5.0-V Output
10% Load Step, 5.0-V Input, 5.0-V Output
Copyright © 2022 Texas Instruments Incorporated
20
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
VISO
IISO load
VISO
IISO load
Time (200 ms/div)
Time (200 ms/div)
D045
D046
图8-14. VISO Load Transient Response, 10% to
图8-15. VISO Load Transient Response, 90% to
90% Load Step, 5.0-V Input, 3.7-V Output
10% Load Step, 5.0-V Input, 3.7-V Output
VISO
IISO load
VISO
IISO load
Time (200 ms/div)
Time (200 ms/div)
D047
D047
图8-16. VISO Load Transient Response, 10% to
图8-17. VISO Load Transient Response, 90% to
90% Load Step, 5.0-V Input, 3.3-V Output
10% Load Step, 5.0-V Input, 3.3-V Output
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
-1
-1
Time (400 ms/div)
Time (400 ms/div)
D049
图8-18. VISO Soft Start at 10% Rated Load, 5.0-V
Input, 5.4-V Output
D050
图8-19. VISO Soft Start at 90% Rated Load, 5.0-V
Input, 5.4-V Output
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
21
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
7
6
7
6
5
5
4
4
3
3
2
2
1
1
0
0
-1
-1
Time (400 ms/div)
Time (400 ms/div)
D051
D052
图8-20. VISO Soft Start at 10% Rated Load, 5.0-V
图8-21. VISO Soft Start at 90% Rated Load, 5.0-V
Input, 5.0-V Output
Input, 5.0-V Output
5
4
3
2
1
0
5
4
3
2
1
0
-1
-1
Time (400 ms/div)
Time (400 ms/div)
D053
图8-22. VISO Soft Start at 10% Rated Load, 5.0-V
Input, 3.7-V Output
D054
图8-23. VISO Soft Start at 90% Rated Load, 5.0-V
Input, 3.7-V Output
5
4
3
2
1
0
5
4
3
2
1
0
-1
-1
Time (400 ms/div)
Time (400 ms/div)
D055
图8-24. VISO Soft Start at 10% Rated Load, 5.0-V
Input, 3.3-V Output
D056
图8-25. VISO Soft Start at 90% Rated Load, 5.0-V
Input, 3.3-V Output
Copyright © 2022 Texas Instruments Incorporated
22
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
9 Power Supply Recommendations
The recommended input supply voltage (VINP) for the UCC12041-Q1 is between 4.5 V and 5.5 V. To help
ensure reliable operation, adequate decoupling capacitors must be located as close to supply pins as possible.
Place local bypass capacitors between the VINP and GNDP pins at the input, and between VISO and GNDS at
the isolated output supply. Low ESR, ceramic surface mount capacitors are recommended. It is further
suggested that one place two such capacitors: one with a value of 10 µF for supply bypassing, and an additional
100-nF capacitor in parallel for high frequency filtering. The input supply must have an appropriate current rating
to support output load required by the end application.
10 Layout
10.1 Layout Guidelines
The UCC12041-Q1 integrated isolated power solution simplifies system design and reduces board area usage.
Proper PCB layout is important in order to achieve optimum performance. Here is a list of recommendations:
1. Place decoupling capacitors as close as possible to the device pins. For the input supply, place the
capacitor(s) between pin 3 (VINP) and pin 2 (GNDP). For the isolated output supply, place the capacitor(s)
between pin 14 (VISO) and pin 15 (GNDS). This location is of particular importance to the input decoupling
capacitor, because this capacitor supplies the transient current associated with the fast switching waveforms
of the power drive circuits.
2. Because the device does not have a thermal pad for heat-sinking, the device dissipates heat through the
respective GND pins. Ensure that enough copper (preferably a connection to the ground plane) is present on
all GNDP and GNDS pins for best heat-sinking.
3. If space and layer count allow, it is also recommended to connect the VINP, GNDP, VISO and GNDS pins to
internal ground or power planes through multiple vias of adequate size. Alternatively, make traces for these
nets as wide as possible to minimize losses.
4. TI also recommends grounding the no-connect pins (NC) to their respective ground planes. For pins 6, 7,
and 8, connect to GNDP. For pins 10, 11, and 12, connect to GNDS. This will allow more continuous ground
planes and larger thermal mass for heat-sinking.
5. A minimum of four layers is recommended to accomplish a low-EMI PCB design. Inner layers can be spaced
closer than outer layers and used to create a high-frequency bypass capacitor between GNDP and GNDS to
reduce radiated emissions. Ensure proper spacing, both inter-layer and layer-to-layer, is implemented to
avoid reducing isolation capabilities. These spacings will vary based on the printed circuit board construction
parameters, such as dielectric material and thickness.
6. Pay close attention to the spacing between primary ground plane (GNDP) and secondary ground plane
(GNDS) on the PCB outer layers. The effective creepage and or clearance of the system will be reduced if
the two ground planes have a lower spacing than that of the device package.
7. To ensure isolation performance between the primary and secondary side, avoid placing any PCB traces or
copper below the UCC12041-Q1 device on the outer copper layers.
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
23
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
10.2 Layout Example
图10-1. Layout Example
Copyright © 2022 Texas Instruments Incorporated
24
Submit Document Feedback
Product Folder Links: UCC12041-Q1
UCC12041-Q1
ZHCSO87 –JUNE 2021
www.ti.com.cn
11 Device and Documentation Support
11.1 Device Support
11.1.1 Development Support
For development support, refer to:
• Isolated 5-V bias supply for automotive CISPR 25, class 5 emissions, reference design
11.2 Documentation Support
11.2.1 Related Documentation
For related documentation see the following:
• UCC12050 Evaluation Module User Guide
• Isolation Glossary
11.3 接收文档更新通知
要接收文档更新通知,请导航至 ti.com 上的器件产品文件夹。点击订阅更新 进行注册,即可每周接收产品信息更
改摘要。有关更改的详细信息,请查看任何已修订文档中包含的修订历史记录。
11.4 支持资源
TI E2E™ 支持论坛是工程师的重要参考资料,可直接从专家获得快速、经过验证的解答和设计帮助。搜索现有解
答或提出自己的问题可获得所需的快速设计帮助。
链接的内容由各个贡献者“按原样”提供。这些内容并不构成 TI 技术规范,并且不一定反映 TI 的观点;请参阅
TI 的《使用条款》。
11.5 Trademarks
TI E2E™ is a trademark of Texas Instruments.
所有商标均为其各自所有者的财产。
11.6 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
11.7 术语表
TI 术语表
本术语表列出并解释了术语、首字母缩略词和定义。
12 Mechanical and Packaging Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Copyright © 2022 Texas Instruments Incorporated
Submit Document Feedback
25
Product Folder Links: UCC12041-Q1
重要声明和免责声明
TI 提供技术和可靠性数据(包括数据表)、设计资源(包括参考设计)、应用或其他设计建议、网络工具、安全信息和其他资源,不保证没
有瑕疵且不做出任何明示或暗示的担保,包括但不限于对适销性、某特定用途方面的适用性或不侵犯任何第三方知识产权的暗示担保。
这些资源可供使用TI 产品进行设计的熟练开发人员使用。您将自行承担以下全部责任:(1) 针对您的应用选择合适的TI 产品,(2) 设计、验
证并测试您的应用,(3) 确保您的应用满足相应标准以及任何其他安全、安保或其他要求。这些资源如有变更,恕不另行通知。TI 授权您仅可
将这些资源用于研发本资源所述的TI 产品的应用。严禁对这些资源进行其他复制或展示。您无权使用任何其他TI 知识产权或任何第三方知
识产权。您应全额赔偿因在这些资源的使用中对TI 及其代表造成的任何索赔、损害、成本、损失和债务,TI 对此概不负责。
TI 提供的产品受TI 的销售条款(https:www.ti.com/legal/termsofsale.html) 或ti.com 上其他适用条款/TI 产品随附的其他适用条款的约束。TI
提供这些资源并不会扩展或以其他方式更改TI 针对TI 产品发布的适用的担保或担保免责声明。重要声明
邮寄地址:Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2021,德州仪器(TI) 公司
PACKAGE OPTION ADDENDUM
www.ti.com
2-Jul-2021
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
(6)
UCC12041QDVERQ1
ACTIVE
SO-MOD
DVE
16
2000 RoHS & Green
NIPDAU
Level-3-260C-168 HR
-40 to 125
UCC12041Q1
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE OUTLINE
DVE0016A
SO-MOD - 2.65 mm max height
S
C
A
L
E
1
.
5
0
0
SMALL OUTLINE INTEGRATED CIRCUIT
C
10.63
9.97
SEATING PLANE
TYP
PIN 1 ID
AREA
0.1 C
A
14X 1.27
16
1
2X
10.5
10.1
NOTE 3
8.89
8
9
0.51
0.31
16X
7.6
7.4
B
2.65 MAX
0.25
C A B
NOTE 4
0.33
0.10
TYP
SEE DETAIL A
0.25
GAGE PLANE
0.3
0.1
0 - 8
1.27
0.40
DETAIL A
TYPICAL
(1.4)
4224275/B 04/2023
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm, per side.
4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm, per side.
5. Reference JEDEC registration MS-013.
www.ti.com
EXAMPLE BOARD LAYOUT
DVE0016A
SO-MOD - 2.65 mm max height
SMALL OUTLINE INTEGRATED CIRCUIT
SYMM
SYMM
16X (2)
1
16X (1.65)
SEE
DETAILS
SEE
DETAILS
1
16
16
16X (0.6)
16X (0.6)
(R0.05) TYP
(R0.05) TYP
SYMM
SYMM
14X (1.27)
8
14X (1.27)
9
9
8
(9.79)
(9.3)
HV / ISOLATION OPTION
8.14 mm CLEARANCE/CREEPAGE
IPC-7351 NOMINAL
7.3 mm CLEARANCE/CREEPAGE
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE:4X
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL
METAL
EXPOSED
METAL
EXPOSED
METAL
0.07 MAX
ALL AROUND
0.07 MIN
ALL AROUND
SOLDER MASK
DEFINED
NON SOLDER MASK
DEFINED
SOLDER MASK DETAILS
4224275/A 04/2023
NOTES: (continued)
6. Publication IPC-7351 may have alternate designs.
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
DVE0016A
SO-MOD - 2.65 mm max height
SMALL OUTLINE INTEGRATED CIRCUIT
SYMM
SYMM
16X (1.65)
16X (2)
1
1
16
16
16X (0.6)
16X (0.6)
SYMM
SYMM
(R0.05) TYP
(R0.05) TYP
14X (1.27)
8
14X (1.27)
8
9
9
(9.79)
(9.3)
HV / ISOLATION OPTION
8.14 mm CLEARANCE/CREEPAGE
IPC-7351 NOMINAL
7.3 mm CLEARANCE/CREEPAGE
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:4X
4224275/B 04/2023
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
重要声明和免责声明
TI“按原样”提供技术和可靠性数据(包括数据表)、设计资源(包括参考设计)、应用或其他设计建议、网络工具、安全信息和其他资源,
不保证没有瑕疵且不做出任何明示或暗示的担保,包括但不限于对适销性、某特定用途方面的适用性或不侵犯任何第三方知识产权的暗示担
保。
这些资源可供使用 TI 产品进行设计的熟练开发人员使用。您将自行承担以下全部责任:(1) 针对您的应用选择合适的 TI 产品,(2) 设计、验
证并测试您的应用,(3) 确保您的应用满足相应标准以及任何其他功能安全、信息安全、监管或其他要求。
这些资源如有变更,恕不另行通知。TI 授权您仅可将这些资源用于研发本资源所述的 TI 产品的应用。严禁对这些资源进行其他复制或展示。
您无权使用任何其他 TI 知识产权或任何第三方知识产权。您应全额赔偿因在这些资源的使用中对 TI 及其代表造成的任何索赔、损害、成
本、损失和债务,TI 对此概不负责。
TI 提供的产品受 TI 的销售条款或 ti.com 上其他适用条款/TI 产品随附的其他适用条款的约束。TI 提供这些资源并不会扩展或以其他方式更改
TI 针对 TI 产品发布的适用的担保或担保免责声明。
TI 反对并拒绝您可能提出的任何其他或不同的条款。IMPORTANT NOTICE
邮寄地址:Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2023,德州仪器 (TI) 公司
相关型号:
UCC12041QDVERQ1
具有集成变压器的汽车类 500mW 3kVrms 隔离式直流/直流模块 | DVE | 16 | -40 to 125Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC12050
500-mW、高效 5-kVrms 隔离式直流/直流转换器Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC12050DVE
500-mW、高效 5-kVrms 隔离式直流/直流转换器
| DVE | 16 | -40 to 125Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC12050DVER
500-mW、高效 5-kVrms 隔离式直流/直流转换器 | DVE | 16 | -40 to 125Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC12051-Q1
具有集成变压器的汽车类 500mW 5kVrms 隔离式直流/直流模块Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC12051QDVERQ1
具有集成变压器的汽车类 500mW 5kVrms 隔离式直流/直流模块 | DVE | 16 | -40 to 125Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC14131-Q1
汽车类、1.5W、12V 至 15V 输入电压、12V 至 15V 输出电压、高密度、> 5kVRMS 隔离式直流/直流模块Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC14141-Q1
具有集成变压器的汽车级、1.5W、12V 输入电压、稳压、5kVRMS 隔离式直流/直流模块Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC14240-Q1
汽车类 2.0W、24Vin、25Vout、高密度、> 3kVRMS、隔离式直流/直流模块Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC14240QDWNRQ1
汽车类 2.0W、24Vin、25Vout、高密度、> 3kVRMS、隔离式直流/直流模块
| DWN | 36 | -40 to 125Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC14241-Q1
Automotive, 2.0-W, 24-Vin, 25-Vout high-density > 5-kVRMS isolated DC/DC moduleWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
UCC14341-Q1
具有集成变压器的汽车级、1.5W、15V 输入电压、稳压、5kVRMS 隔离式直流/直流模块Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
©2020 ICPDF网 联系我们和版权申明