EDSX11-137B_技术文档

FC SERIES RATIO SETTER

DATA SHEET

PDG3

The FC series Ratio Setter carries out ratio setting and com-

putation for ratio control and sends a signal to a controller as

its set value.

This product is a ratio setter to be used in a process and it

excels in the effect of monitoring due to adoption of a color

LCD.

Besides standard signals of 1 to 5 V DC, input signals from

thermocouples and resistance bulbs can be handled at op-

tion.

FEATURES

1. High visibility ensured with color graphic display

A color LCD is adopted for graphic display of bar graph

and trend screens,etc.

2. Communication function (option)

RS-485 (Modbus protocol) are available.

3. Memory card (option)

Memory card can save any data, for example process in-

put, WAFER output, etc.

Communication

®

RS-485 (Modbus

Transmission terminal

)

PV

SV

indicator indicator

SO

indicator

Signal name/terminal No.

Signal name/terminal name

Linearize

Square root

Filter

Local mode output (LS)/DO7

(KPV)

(SO)

Process variable input/PV1

(Analog input)

PV compensation signal

(KPV)/AO3

SOH

R

SO=R(SV+B3) x

(KPV–B1)+B2

Computed value output (SO)/AO1

B1

B2

B3

SOL

2

Squared computed value output

(SO2)/AO2

R

L

SO

RSVH

RSVL

(SV)

External set point value

input/PV2

(Analog input)

Set point value output signel

(SV)/AO4

Input

switch

Remote reqest (R-REQ)/DO8

R

Upper alarm output (H)/DO9

Lower alarm output (L)/DO10

Fault output (FLT-Do)/FLT

KPV

Alarm

Remot acknowledge signal

(R-ACK)/DI6

R-mode

Fault

FLT lamp

EDSX11-137b

Date Dec. 24, 2003

PDG3

•Allowable signal source resistance:

100 Ω or less (Zener barrier connection

unallowable)

SPECIFICATIONS

1. Input Signals

Performance under reference condition(23± 2˚C,

55±10%RH, Power voltage and frequency variation ±1%,

free from the effect of external noise) unless otherwise

specified.

•Influence by signal source resistance:

About 0.25 µV/Ω

•Influence by ambient temperature:

±0.2% FS/10°C ±1°C or less.

•Influence by power supply fluctuation:

±0.2% FS ±1˚C or less

1-1 Analog input signal

• Number of inputs

8 inputs

•Burnout detection: Provided

•Isolation: Isolated from internal circuit.

(3) Resistance bulb (option)

•Types and measurable ranges:

* See Table 2.

•Input accuracy: ±0.2% FS ±1 digit

•Input accuracy guarantee range:

-5% to 105% of input range

• Inpute signal types

: DC voltage, thermocouple (option), resistance bulb (op-

tion)

Two thermocouple inputs or two resistance bulb inputs

are selectable.

•Allowable wiring resistance: 10Ω or

less per wire, provided wiring resis-

tance must be equal among 3 wires (Ze-

ner barrier connection unallowable)

•Influence by ambient tempera-

ture: ±0.2% FS/10˚C or less.

•Influence by power supply fluctuation:

±0.2% FS or less

•Burnout detection: Provided

(1) DC voltage • Input range: Selectable among 0 to 5 V

DC, 1 to 5 V DC and 0 to 10 V DC

Initial set before delivery : 1 to 5 V DC

•Input accuracy: ±0.1% of input span±1

digit

•Scaling (Industrial data conversion) :

Settable within a range from -32767 to

32767

4, 3, 2, 1 or 0 digit below decimal point

is selectable.

Initial set before delivery : 0.00% to

100.00%

•Industrial unit: Settable in up to 8 char-

acters

•Isolation: Isolated from internal circuit.

[Note] FS: full span.

• Sampling period

: 100 ms

Usable characters: Alphabets numerals,

1-2 Digital input signal

• Number of inputs

: 10 inputs

• Electrical specifications

: No-voltage contact or transistor contact

symbols such as +, – , ,etc.

*

•Input accuracy guarantee range: –5% to

105% of input range.

•Maximum continuous permissible volt-

age: ±35 V

•Input resistance: 1 MΩ or more

•Influence by ambient temperature:

±0.1% FS/10°C or less.

•Influence by power supply fluctuation:

±0.1% FS or less.

•Isolation : Non-isolated from internal cir-

cuit.

ON/0 V, OFF/24 V, ON current/about 8

mA

Isolated from the internal circuit by

photocoupler. Not isolated between

each digital input and output.

• Contact rating : 30 V DC, 10 mA or more

• Signal judgment

: No-voltage contact

•In case of current input:

Shunt resistor need to be connected to

the analog input terminal.

Contact resistance;

200 Ω or less at ON,

100 kΩ or more at OFF

: Transistor contact

1V max at ON.,

leakage current 100µA max. at OFF

(250 Ω shunt resistor is optional item)

(2) Thermocouple (option)

•Types and measurable ranges:

* See Table 2.

2. Output Signals

•Input accuracy: ±0.2% FS ±1 digit

[Note]B type: ±5% between 0 to 400˚C

S and R type: ±1%between 0 to 500˚C

All type of TC: ±5% under–100˚C

•Reference junction compensation error:

±1.0°C (provided measurable range is

–50°C and higher)

Performance under reference condition(23± 2˚C,

55±10%RH, Power voltage and frequency variation ±1%,

free from the effect of external noise) unless otherwise

specified.

2-1 Analog output signal

[Note]Reference junction compensa-

tion resistor is connected at external

input terminal in case of thermo-

couple input is ordered.

•Input accuracy guarantee range: –5%

to 105% of input range.

(1) Auxiliary analog output

• Number of outputs:

: 4 outputs

• Types of signal : Selectable among 0 to 5 V DC, 1 to 5 V

DC and 0 to 10 V DC

Initial set before delivery: 1 to 5 V DC

•Input resistance: 1 MΩ or more

2

• Output accuracy

: ±0.1% FS

• Load resistance

: 15 kΩ or more

• Output guarantee range

: 1 to 5 VDC : –12.5% to 112.5%

4.Setting and Operation

(1) Set point setting method

• Setting key

: Up key/down key

• Setting speed : About 40 s/FS

• Setting resolution

: 0.05% FS/each key press

: 0 to 5 VDC : 0% to 112.5%

: 0 to 10VDC : 0% to 105%

(2) Operation mode

• Kinds of operation mode

• Influence by power supply fluctuation

: ±0.1% FS or less

: R and L

[Note] R: Remote mode (operation according to exter-

nal set point)

•Isolation

: Non-isolated from internal circuit

L: Local mode (operation according to the inter-

nal set point)

• Changeover : Balance bumpless changeover from Lo-

cal to Remote

2-2 Digital output signal

• Number of outputs

: 10 outputs

• Electrical specifications

: Transistor open collector

Balanceless bumpless in other

changeover

1 V max. at ON, 10 µA max at OFF.

Isolated from the internal circuit by

photocoupler. Not isolated between

[Note] Balance bumpless changeover is a method

where each setting value needs to be balanced

by operator himself at the time of changeover.

Balanceless bumpless changeover is a method

where each setting value is automatically bal-

anced by the ratio setter at the time of

changeover.

each digital input and output.

• Output rating : 30 V DC, 100 mA max. (resistive load)

2-3 Fault output signal (terminal symbol FLT)

• Number of outputs

(3) Security

: 1 output

• Electrical specifications

• Method

• Password

: Setting of a password

: Settable in 4 numerals (within 0000 to

ffff)

: Transistor open collector

1 V max. at ON, 10 µA max at OFF.

Isolated from the internal circuit by

photocoupler. Not isolated between

each digital input and output.

Initial set before delivery: 0000

• Contents of security

: Inhibition of parameter setting

(4) Other setting items

• Output rating : 30 V DC, 100 mA max. (resistive load)

• Tag name

: Settable in up to 8 characters

Usable characters; alphabes, numerals,

symboles such as +, – , ,etc.

*

3. Display

5.Power Supply

• Voltage rating : 100 V to 240 V AC/24 V DC

• Allowable range

• Display unit : 16 Colors graphic liquid crystal display,

with CFL back light and contrast adjust

function.

: 85 V to 264 V AC/20 V to 30 V DC

• Contents of display

• Frequency

• Power consumption

: 60 VA or less (100 V to 240 V AC)

: 30 W or less (24 V DC)

•Power supply output voltage

(terminal symbol VP and PC)

: 20V to 30V DC,max. 40mA

: 47 to 63 Hz

: Menu

: Loop panel

Bar graph display, digital display, etc.

: Trend screen (max. 8 screens)

: Alarm and alarm historical screen

: Analog input/output and digital input/

output indication screen

: WAFER connection screen

: Parameter setting screen

3

PDG3

6. General performance and characteristics

• Insulation resistance

9. Self-Diagnosis

• Control and computation circuit failure

: 500 V DC, 50 MΩ or more.

• Dielectric strength

: Monitoring with watchdog timer

• Input signal failure

: Voltage/current input

: 2,000 V AC for 1 minute between

power terminal and ground terminal in

case of 100 V to 240 V AC power supply

: 500 V AC for 1 minute between power

terminal and ground terminal in case of

24 V DC power supply.

: 500 V AC for 1 minute between signal

communication terminals and ground

terminal

Monitoring of range over

: Thermocouple and resistance bulb

Monitoring of disconection

• Behavior at failure

: FLT is indicated, FLT lamp lights, and

FLT output signal turns on.

10. Structure

• Enclosure

• Finish color

• Rush current : 60 A or less. (100 V AC to 240 V AC

power supply)

: Plastic (material: PC-ABS)

: Front frame and enclosure both gray

• Clock

: Set and display year, month, day, hour,

minute, second

• Flame resistance

: UL94V-0

accuracy : ±100 ppm except of time lag

shorter than 1 s / power ON / OFF ac-

tion.

• Protection

: Front face; IP54 (display unit and opera-

tion key)

• External dimensions (W x H x D)

• Memory backup

: Protection by lithium battery.

: 72 x 144 x 280 mm

• Mass

• Mounting method

: Flush on indoor panel

: 1.9 kg or less

(expected battery life is about 2 years

under room temperature)

Parameter and program are stored non-

volatile memory.

Vertical mounting as standard

Tilted mounting allowed within back-

ward angle 0° to 45°.

7. Operating and storage conditions

• Operating temperature

: 0 to 50˚C

: 0 to 40°C in case of multiple mounting

90° to 45°

( Temperature change rate : Max. 10˚C / h)

• Transport and storage temperature

: -20 to 70˚C

For panel cutout dimension, refer to

Panel Cutout Dimensions

( Temperature change rate : Max. 20˚C / h)

• Operating humidity

• External terminal

: Compression terminal type

: 5 to 90% RH, condensation unallowable

• Transport and storage humidity

: 5 to 95% RH, condensation unallowable

• Operating continuous vibration

: 4.9 m/s²or less

11. Communications (option)

11-1 RS485 interface-1

•Communication behavior

: Slave

• Transport and storage shock

: Fall of 60cm max. in packed status

• Communication protocol

: Modbus^®protocol

• Physical specification

: EIA RS-485

• Communication method

: Half-duplex, bit serial

: Start-stop synchronizing

• Connection form

: Multi-drop

• Communication speed

: 19.2 kbps

• Communication distance

: Max. 500 m in total

• Number of connectable units

8. Power Failure and restart Function

• Permissible duration of momentary power failure

: 20 ms at 90V AC (100 V to 240 V AC

only)

[Note] In case of 24 V DC, system power supply unit

(model: PXJ) is recommended to avoid power

failure problem.

• Behavior at power failure detection

: Control stops at detection of power fail-

ure.

• Power recovery mode

: Selectable initial start and continuous

start

: Max. 31 units

• Data length

• Parity

• Stop bit

: Fixed to 8 bits

: Odd / Even / None

: 1 or 2

• Isolation

• Terminator

: Isolated from internal circuit

: 100 Ω (optional item)

• Communication items

: Parameters and process value.

• RS232C / RS485 signal converter (optional item)

: Code symbol: PDZT0001

4

12. Memory Card Interface (option)

• Specification : Compact Flash^®(Based on CFA)

• Compatible memory card

: 5 V flash memory card

Capacity 4, 20 and 32 MB

• Application

: Process data logging (32 points or less)

• Saving period : 1s to 2h

• Data storage capacity

Memory card

capacity

Data storge

4MB

about 180 thousand data

about 900 thousand data

about 1.35 million data

20MB

32MB

[Note] The data of max. 16 points (4 screens) can be

storaged at storage time as 1 s.

• Format method

: Dependent on this setter

• Data readout : Readout by PC using PCMCIA card slot

• Recommended memory card

: Made by Sandisk corporation

Sandisk compact Flash memory card is

standardized and on the market.

13. Standards under Conformity

(1) General safety

: IEC 1010-1 (1990)

EN 61010-1 (1993)

(2) EMC

: Emission EN 50081-2 (1994)

Immunity EN 50082-2 (1995)

5

PDG3

Table 1

List of WAFERS

WAFER name

Kinds

Outline

WAFER name

Kinds

Outline

Bit concatevate

8

Outputs digital data as word data to

an external expansion I/O.

Slices the digital data acquired as

word data from an external

expansion I/O into each bit.

Encodes an input signal into

a binary code.

Generates a sawtooth wave with

a slope entered for each

cycle time.

Converts BCD data into binary data

and binary data into BCD data.

Carries out AND,OR,NOT,XOR

and a combination of these logical

operations.

Carries out a combination of

addition,subtraction,multiplication

and division.

Carries out temperature and

pressure compensation through use

of differential pressure,compensated

pressure,proper temperature.

Carries out segmented-line

approximation with 15-segmented-

line function.

Pulse No.counter

1

Detects rise of pulse and counts the

number of pulses.

Integrates the input signal and

converts it to number of pulses

for output.

Bit slicing

1

Pulse No.output

1

Encoder

1

Decoder

1

2

1

Decodes 2-bit pure binary input and

outputs it to 4 terminals.

Sawtooth wave generator

Running average

Sample & hold

Calculates ranning average of input

data and outputs the result.

Holds the input value according to

sample signal(0/1)and continues

the output.

Usable for dead time compensation

control etc.Data sampling can be

done in 1 sec or 1 min units.

Outputs ON-OFF signal with

hysteresis.

BCD

5

6

Logical operation

Dead time

6

Arithmetic operation

8

1

ON-OFF

1

Alarm

Compares the input and set value

and outputs the judgment result.

Performs output processing in time

proportional PID control.

Temperature/pressure

compensation

Palse width modurator

A variety of applications are possible through combination of WAFERS.

Linearize

7

Flip-flop

Pulse width integration

1

RS flip-flop.

Adds the change of input at each

basic cycle to the previous

integration value.

Selector

1

Compares two input values,and

provides High output(Large one),

Low output(Small one),and result

of judgement on large/small.

Selects input or output via a switch

function.Analog hold circuit also

provided.

Outputs on-delay,off-delay timer

signal via start of input signal

according to timer setting.

Carries out absolute value processing

on input and outputs the result.Also

judges the sign(Positive,negative)of

input value and outputs the result.

Extracts square root of input value

and outputs the result.Low input

cutoff function equipped.

Carries out lead/lag operation on the

input and outputs the results.

Used as analog filter function and

for various compensations.

Limits the input within the range of

high/low limit settings,and outputs

the result.Also outputs high/low

limit alarm signal.

Outputs signal which changes...in

ramp from toward target value at

the set full scale time.There are two

of these wafers...in minute unit and

hour unit.

Changeover

Timer

1

Absolute value/sign

inversion

Square root extraction

Lead,lag

1

3

Limiter

1

2

Ramp function

Analog averaging

Analog integration

1

Carries out sequential integration on

input data,calculates the average

value at each averaging time,

and otuputs the result.

Integrates the value obtained by

multiplying the input data by

a proportional constant,and outputs

the result.

Pulse generation

Dead band

1

Outputs a pulse at the set time

interval.

Adds dead band compensation to

the input and outputs the result.

6

Table 2

SCOPE OF DELIVERY

List of Thermocouple and Resistance Bulb Measurable

range

Ratio setter, panel mounting bracket, instruction manual

(depend on code symbols)

Input signal

Input type code Input range code Measurable range˚C

Thermocouple

J

01

00

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

00

01

02

03

04

05

06

07

0.0~400.0

0.0~800.0

0.0~400.0

0.0~800.0

0.0~1200.0

0.0~1600.0

0.0~1800.0

Optional Items

J

Available

Item

Type

Specificatio

unit

K

Terminator

PDZR2001

For compression terminal

1

K

for communication (100 Ω)

Shunt resistor (250 Ω)

K

PDZS2001

For compression terminal

1

R

Communication cable (Note1)

B

For compression terminal, PDZK4xx1

from PD* to PD*

With compression

T

-

200.0

~

200.0

400.0

terminal at both ends

With M3.5 solderless

terminal on PLC side

9-pin connector on PC side

T

-

150.0~

For compression terminal, PDZK5xx1

from PD* to PLC

E

0.0~800.0

200.0 800.0

E

-

~

For compression terminal, PDZK6xx1

from PD* to PC

S

0.0~1600.0

0.0~1300.0

N

Communication converter PDZT0001

RS232C / RS485

signal converter

Instruction manual in

book form

U

-200.0~400.0

WRe5-26

PL2

0.0~2300.0

0.0~1300.0

0.0~150.0

0.0~300.0

0.0~500.0

0.0~600.0

-50.0~100.0

Ratio Setter

Instruction Manual

PDZX3G01

PDZQ2001

PDZA1001

1

Resistance bulb Pt100

00

in book form (in English)

Instruction Manual on

CD-ROM (in English)

Mounting bracket

Instruction manual on

CD-ROM

1

Improved mounting

bracket

-

100.0

200.0~600.0

200.0~850.0

~200.0

(Note 1) These cables are used for Modbus

Length needs to be specified.

.

-

Block diagram of electrical isolation

Solid line shows

isolation from the

other units or circuits.

Power

supply

Power supply

unit

DI1 to DI10

DI / DO

unit

Ground

PV1

DO1 to DO10

Ground

TC or RTD

input unit

AI1 to AI6

AI / AO

unit

TC or RTD

input unit

PV2

AO1 to AO4

RS485

(Modbus)

Communication unit

7

PDG3

CODE SYMBOLS

1 2 3 4 5 6 7 8

P D G 3 1 -

9 10111213 1415

- Y Y

Y

Description

Number of loops <5th digit code>

1

1 loop

External terminal <6th digit code>

Compression terminal

2

Input signal <7th digit code>

1 to 5 V DC

Thermocouple

A

C

D

Note 1

Note 2

Resistance bulb Pt100

Power supply voltage <9th digit code>

A

B

100V to 240V AC (Usable range 85V to 264V AC) 50 / 60Hz

24V DC (Usable range 20 to 30V DC)

Operation mode <10th digit code>

Remote-Local changeable type

R

Communicatioin / Memory card interface <12th digit code>

(Slave)

Without

RS485

(Master)

Without

(memory card interface) Note 3 Note 4

Without

With

Y

M

C

Without

With

Note 5

U

Instruction manual <13th digit code>

Without

Y

D

With Instruction manual on CD-ROM (in Japanese and English)

Note 1) For current input, a shunt resistor is used for conversion into voltage.

Shunt resistor is optional item.

Note 2) Thermocouple and resistance bulb input are opitons.

Allowable up to 2 points.

Note 3) Communication cable and terminator are optional items.

Note 4) Recommended maker: Sandisk corporation.

Note 5) Slave interface is Modbus protocol.

Note 6) Input signal and measurable range initial set before delibvery is as follows.

For specification of voltage input, scale is 0.00 to 100.00%

For specification of thermocouple, K, 0.0 to 400.0˚C.

For specification of resistance bulb is 0.0 to 150.0˚C.

8

OUTLINE DIAGRAM (Unit : mm)

Terminal cover

Panel thickness 8mm or less

Mounting bracket

Panel

72

21.6

280

Mounting bracket

Note) The distance between other instruments and low end of PDG shall be more than 100mm.

MOUNTING BRACKET

50

205

PANEL CUTOUT DIMENSIONS

For mounting

one unit

For mounting

multiple "n" units

Number of

units n

2

+1

0

68 ^+0.7

(72.2n-4)

0

9

PDG3

EXTERNAL CONNECTION DIAGRAM

1

2

3

4

5

6

7

8

AI1

SC

AI2

AI3

SC

AI4

AI5

SC

AI6

SC

VP

PC

DI9

DI10

DO9

DO10

22

23

24

25

26

27

28

29

30

MI+2

MI-2

MI+3

MI-3

MI+4

MI-4

DO6

DO7

DO8

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

MI+1

MI-1

AO1

SC

AO2

AO3

SC

Voltage

input

VPD

AO4

FLT

9

10

11

12

13

14

15

16

31 DIO-COM

32

33

DO1

DO2

DO3

DO4

DO5

DI1

VPD

PCD

(+)

(–)

DI6

DI7

24 V external

Power supply

34 DIO-COM

35

36

37

38

39

40

41

42

DI8

OPT+

OPT-

COM

I+2

Io2

Rcj2

I-2

58 DIO-COM

59

60

PCD

(+)

17 MOD+

18 MOD-

19

20

21

DI2

DI3

PCD

(+)

RS-485

(Modbus

(–)

(COM)

b

)

Rcj

Process

variable

input 2

COM

VPD

PCD

61 DIO-COM

A

62

63

64

65

66

67

DI4

DI5

I+1

Io1

Rcj1

I-1

24 V

(–)

Power

supply

for DIO

B

(+)

Resistance

Voltage Thermo-

b

Rcj

bulb

input

couple

input

Process

variable

input 1

A

(–)

B

Resistance

Voltage Thermo-

bulb

input

couple

input

G

N/– L/+

Power source 100 to 240V AC

Power source 24V DC

~

–

+

INPUT/OUTPUT TERMINAL FUNCTION (when preset WAFER)

Input signal name

PV input

Input terminal

I+1，I-1

I+2，I-2

AI1

Output signal name

Output terminal

AO1

Computed value output (SO)

Squared computed value (SO2)

PV compensation signal (KPV)

Set value output signal (SV)

Don't use

External AMV input

AO2

Universal analog input

Universal digital input

Remote acknowledge signal (R-ACK)

Universal digital input

AO3

AI2

AO4

Analog

MI+1，MI-1

MI+2，MI-2

MI+3，MI-3

MI+4，MI-4

DO1

AI3

Don't use

AI4

Don't use

AI5

Don't use

AI6

Universal digital output

Local mode output (LS)

Remote request (R-REQ)

Upper alarm output (H)

Lower alame output (L)

Fault output (FLT-DO)

Don't use

DI1

DO2

DI2

DO3

DI3

DO4

DI4

DO5

DI5

DO6

DI6

Digital

DO7

DI7

DO8

DI8

DO9

DI9

DO10

DI10

FLT

OPT+

Don't use

OPT-

10

11

PDG3

[Note] Windows is the registered trade mark of Microsoft corporation.

[Note] Modbus is the registered trade mark of Gould Modicon.

[Note] Compact Flash is the registered trade mark of Sandisk corporation.

Caution on Safety

*Before using this product, be sure to read its instruction manual in advance.

Head Office

6-17, Sanbancho, Chiyoda-ku, Tokyo 102-0075, Japan

http://www.fesys.co.jp/eng

Sales Div.

International Sales Dept.

No.1, Fuji-machi, Hino-city, Tokyo, 191-8502 Japan

Phone: 81-42-585-6201, 6202 Fax: 81-42-585-6187

http: //www.fic-net.jp/eng

Printed in Japan

Information in this catalog is subject to change without notice.


型号：	EDSX11-137B
厂家：	FUJI ELECTRIC
描述：	FC SERIES RATIO SETTER FC系列比SETTER
文件：	总12页 (文件大小：107K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

EDSX11-137B [FUJI]

相关型号：

EDSX11-138B

EDSX11-140A

EDSX3-113C

EDSX3-119B

EDSX3-137D

EDSX5-71

EDSX5-72

EDSX5-73

EDSX5-74

EDSX5-75

EDSX5-76A

EDSX5-77