EDSX11-132E [FUJI]
Digital Controller COMPACT CONTROLLER M [CC-M] (PROGRAMMABLE CONTINUOUS OUTPUT TYPE); 数字控制器紧凑型控制器M [ CC - M] （可编程连续输出型）
| 型号： | EDSX11-132E |
| 厂家： | 
FUJI ELECTRIC |
| 描述： | Digital Controller COMPACT CONTROLLER M [CC-M] (PROGRAMMABLE CONTINUOUS OUTPUT TYPE) |
| 文件： | 总12页 (文件大小：116K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Digital Controller
COMPACT CONTROLLER M [CC-M]
(PROGRAMMABLE CONTINUOUS OUTPUT TYPE)
DATA SHEET
PDA3
The Compact Controller M (programmable continuous out-
put type) is a multi-loop process controller.
It accepts 1 to 5 V DC and signals from thermocouples and
resistance bulb as input, and is provided with abundant con-
trol and computation functions to allow configuring a flex-
ible system with a high cost performance.
FEATURES
1. Multi-loop controller of up to 4 control outputs.
CC-M has max.4 control outputs,that is real 4-loop multi-
loop controller.
[Note] In this data sheet, the term "loop" is used in the
same meaning as the quantity of control output.
2. Control and computation functions dependent on wafers
Control and computation functions are implemented by
combining function-software packages called "WAFERS."
Since the WAFERS are built in the controller, optimum
system can be programmed by using the front-panel keys
and the PC based configurator.
(1) PID control
• Number of loops and PID
: Selectable among the following
3. High visibility ensured with color graphic display
A color LCD is adopted for graphic display of multi-loop
bar graph and trend screens,etc.
1 loop (1 control output / 2PID)
2 loops (2 control outputs / 4PID)
4 loops (4 control outputs / 8PID)
4. Communication function (option)
• Proportional band (P)
RS-485 (Modbus protocol or OPTO22 interface ) are
available.
5. Soft logic function (option)
PLC function can be implemented by IEC61131-3 stan-
dard programming language through the PC based con-
figuration software.
: 1.0 to 3276.7%, set at 3000.0% for de-
livery
• Integration time (I)
: 0.1 to 3276.7 s, set at 3000.0 s for deliv-
ery
• Derivative time (D)
: 0.0 to 900.0 s, set at 0.0 s for delivery
(2) Programming function
• Programming method
: WAFER connection
• Program capacity
: 48 WAFERS x 4 loops (max. 192 WA-
6. Back-up (option)
If the controller becomes faulty, influence over the sys-
tem can be evaded by changing the built-in backup opera-
tion unit.
7. Memory card (option)
Memory card can save any data, for example process in-
put, WAFER output, etc.
FERS)
A maximum of 48 WAFERS usable in 1
loop
• Kind of wafer : 100 kinds listed in Table 1
(3) Computation cycle
: 200 ms for 4-loop (8PID) control of sim-
plicity PID
SPECIFICATIONS
1. Control and Computation Functions
Control and computation functions are implemented by
combining function-software packages called "WAFERS."
Combination of WAFERS is called "WAFER connection."
CC-M comprises 100 kinds of WAFERS.
WAFER connection is made by operating the keys on the
front panel or using the PC based configurator.
(4) Alarm function
• Method
• Kinds
: Alarm can be displayed and output
through WAFER connection.
: Each high/low of PV, SV and MV, PV
change rate alarm, MV change rate
alarm, high/low deviations.
EDSX11-132e
Date Dec. 24, 2003
PDA3
2. Input Signals
•Influence by signal source resistance:
About 0.25 µV/Ω
•Influence by ambient temperature:
±0.2% FS/10°C ±1°C or less.
•Influence by power supply fluctuation:
±0.2% FS ±1˚C or less
Performance under reference condition(23± 2˚C,
55±10%RH, Power voltage and frequency variation ±1%,
free from the effect of external noise) unless otherwise
specified.
2-1 Analog input signal
• Number of inputs
8 inputs
•Burnout detection: Provided
•Isolation: Isolated from internal circuit.
(3) Resistance bulb (option)
•Types and measurable ranges:
* See Table 2.
• Inpute signal types:
DC voltage, thermocouple (option), re-
sistance bulb (option)
•Input accuracy: ±0.2% FS ±1 digit
•Input accuracy guarantee range:
-5% to 105% of input range
•Allowable wiring resistance: 10Ω or
less per wire, provided wiring resis-
tance must be equal among 3 wires (Ze-
ner barrier connection unallowable)
•Influence by ambient tempera-
ture: ±0.2% FS/10˚C or less.
Two thermocouple inputs or two resis-
tance bulb inputs are selectable.
(1) DC voltage • Input range: Selectable among 0 to 5 V
DC, 1 to 5 V DC and 0 to 10 V DC
Initial set before delivery : 1 to 5 V DC
•Input accuracy: ±0.1% of input span±1
digit
•Scaling (Engineering data conversion) :
Settable within a range from -32767 to
32767
•Influence by power supply fluctuation:
±0.2% FS or less
•Burnout detection: Provided
4, 3, 2, 1 or 0 digit below decimal point
is selectable.
•Isolation: Isolated from internal circuit.
[Note] FS: full span.
Initial set before delivery : 0.00% to
100.00%
•Engineering unit: Settable in up to 8
characters
• Sampling period
: 100 ms
Usable characters: Alphabets numerals,
2-2 Digital input signal
• Number of inputs
: 10 inputs
• Electrical specifications
: No-voltage contact or transistor contact
symbols such as +, – , ,etc.
*
•Input accuracy guarantee range: –5% to
105% of input range.
•Maximum continuous permissible volt-
age: ±35 V
•Input resistance: 1 MΩ or more
•Influence by ambient temperature:
±0.1% FS/10°C or less.
•Influence by power supply fluctuation:
±0.1% FS or less.
•Isolation : Non-isolated from internal cir-
cuit.
ON/0 V, OFF/24 V, ON current/about 8
mA
Isolated from the internal circuit by
photocoupler. Not isolated between
each digital input and output.
• Contact rating : 30 V DC, 10 mA or more
• Signal judgment
: No-voltage contact
•In case of current input:
Shunt resistor need to be connected to
the analog input terminal.
Contact resistance;
200 Ω or less at ON,
100 kΩ or more at OFF
: Transistor contact
(250 Ω shunt resistor is optional item)
(2) Thermocouple (option)
1V max at ON.,
•Types and measurable ranges:
* See Table 2.
leakage current 100µA max. at OFF
•Input accuracy: ±0.2% FS ±1 digit
[Note]B type: ±5% between 0 to 400˚C
S and R type: ±1%between 0 to 500˚C
All type of TC: ±5% under–100˚C
•Reference junction compensation error:
±1.0°C (provided measurable range is
–50°C and higher)
[Note]Reference junction compensa-
tion resistor is connected at external
input terminal in case of thermo-
couple input is ordered.
3. Output Signals
Performance under reference condition(23± 2˚C,
55±10%RH, Power voltage and frequency variation ±1%,
free from the effect of external noise) unless otherwise
specified.
3-1 Analog output signal
(1) Control output
• Number of outputs
: Selectable among 1, 2 and 4 outputs
• Output signal : 4 to 20 mA DC
• Output accuracy
•Input accuracy guarantee range: –5%
to 105% of input range.
: ±0.2% FS
•Input resistance: 1 MΩ or more
•Allowable signal source resistance:
100 Ω or less (Zener barrier connection
unallowable)
• Load resistance
: 600 Ω or less
2
• Output accuracy guarantee range
: 2 to 22 mA DC
5.Setting and Operation
(1) Set point setting method
• Influence by ambient temperature
: ±0.2% FS/10˚C or less
• Influence by power supply fluctuation
: ±0.2% FS or less
• Setting key
• Setting speed : About 40 s/FS
• Setting resolution
: Up key/down key
: 0.05% FS/each key press
• Isolation
(2) Auxiliary analog output
• Number of outputs:
: Non-isolated from internal circuit
(2) Control output operation method
• Operation key : Up key, down key and high-speed key
• Operation speed
: 4 outputs
: About 40 s/FS (usual),
• Types of signal : Selectable among 0 to 5 V DC, 1 to 5 V
DC and 0 to 10 V DC
about 8 s/FS (high speed)
(3) Operation mode
Initial set before delivery: 1 to 5 V DC
• Output accuracy
• Kinds of operation mode
: C, A, and M
: ±0.1% FS
[Note] C : Cascade mode (operation according to
remote set point)
• Load resistance
: 15 kΩ or more
A : Auto mode (operation according to the
local set point)
M : Manual mode (control output to be
manually operated by operator)
• Changeover : Balance bumpless changeover from
Auto to Cascade
• Output guarantee range
: 1 to 5 VDC : –12.5% to 112.5%
: 0 to 5 VDC : 0% to 112.5%
: 0 to 10VDC : 0% to 105%
• Influence by power supply fluctuation
: ±0.1% FS or less
Balanceless bumpless in other Auto to
Cascade
•Isolation
: Non-isolated from internal circuit
Balanceless bumpless in other
changeover
3-2 Digital output signal
• Number of outputs
: 10 outputs
• Electrical specifications
: Transistor open collector
[Note] Balance bumpless changeover is a
method where each setting value
needs to be balanced by operator him-
self at the time of changeover.
Balanceless bumpless changeover is a
method where each setting value is au-
tomatically balanced by the controller at
the time of changeover.
1 V max. at ON, 10 µA max at OFF.
Isolated from the internal circuit by
photocoupler. Not isolated between
each digital input and output.
• Output rating : 30 V DC, 100 mA max. (resistive load)
(4) Security
• Method
• Password
: Setting of a password
: Settable in 4 numerals (within 0000 to
ffff)
3-3 Fault output signal (terminal symbol FLT)
• Number of outputs
: 1 output
Initial set before delivery: 0000
• Electrical specifications
• Contents of security
: Inhibition of parameter setting
(5) Other setting items
: Transistor open collector
1 V max. at ON, 10 µA max at OFF.
Isolated from the internal circuit by
photocoupler. Not isolated between
each digital input and output.
• Tag name
: Settable in up to 8 characters
Usable characters; alphabes, numerals,
symboles such as +, – , ,etc.
*
• Output rating : 30 V DC, 100 mA max. (resistive load)
6.Power Supply
• Voltage rating : 100 V to 240 V AC/24 V DC
• Allowable range
4. Display
• Display unit : 16 Colors graphic liquid crystal display,
with CFL back light and contrast adjust
function.
: 85 V to 264 V AC/20 V to 30 V DC
• Frequency
• Power consumption
: 60 VA or less (100 V to 240 V AC)
: 30 W or less (24 V DC)
•Power supply output voltage
(terminal symbol VP and PC)
: 20V to 30V DC,max. 40mA
: 47 to 63 Hz
• Contents of display
: Menu
: Loop panel (1, 2, 4 and 8 loops)
Bar graph display, digital display, etc.
[Note] The term "loop" hereby indicates
the number of control blocks. It does
not mean the number of control out
puts.
: Tuning screen
: Trend screen (max. 8 screens)
: Alarm and alarm historical screen
: Analog input/output and digital input/
output indication screen
: WAFER connection screen
: Parameter setting screen
3
PDA3
10. Self-Diagnosis
• Control and computation circuit failure
7. General performance and characteristics
• Insulation resistance
: 500 V DC, 50 MΩ or more.
• Dielectric strength
: Monitoring with watchdog timer
• Input signal failure
: Voltage/current input
: 2,000 V AC for 1 minute between
power terminal and ground terminal in
case of 100 V to 240 V AC power supply
: 500 V AC for 1 minute between power
terminal and ground terminal in case of
24 V DC power supply.
: 500 V AC for 1 minute between signal
communication terminals and ground
terminal
Monitoring of range over
: Thermocouple and resistance bulb
Monitoring of disconnection
• Control output signal failure
: Monitoring of disconnection by read
back check
• Behavior at failure
: FLT is indicated, FLT lamp lights, FLT
output signal turns on, control stops and
control output is held.
: 60 A or less. (100 V AC to 240 V AC
power supply)
• Rush current
• Clock
: Set and display year, month, day, hour,
minute, second
11. Structure
• Enclosure
• Finish color
• Flame resistance
: UL94V-0
• Protection
accuracy : ±100 ppm except of time lag
shorter than 1 s / power ON / OFF ac-
tion.
: Plastic (material: PC-ABS)
: Front frame and enclosure both gray
• Memory backup
: Protection by lithium battery.
: Front face; IP54 (display unit and opera-
tion key)
(expected battery life is about 2 years
under room temperature)
• External dimensions (W x H x D)
Parameter and program are stored non-
volatile memory.
: 72 x 144 x 280 mm
• Mass
• Mounting method
: Flush on indoor panel
: 1.9 kg or less
8. Operating and storage conditions
Vertical mounting as standard
Tilted mounting allowed within back-
ward angle 0° to 45°.
• Operating temperature
: 0 to 50˚C
: 0 to 40°C in case of multiple mounting
( Temperature change rate
: Max. 10˚C / h)
• Transport and storage temperature
: -20 to 70˚C
90° to 45°
( Temprature change rate
: Max. 20˚C / h)
• Operating humidity
For panel cutout dimension, refer to
Panel Cutout Dimensions
: 5 to 90% RH, condensation unallowable
• Transport and storage humidity
: 5 to 95% RH, condensation unallowable
• External terminal
: Compression terminal type
12. Backup Function (option)
• Method : With backup operation unit
• Number of control outputs
: 1, 2 or 4 outputs selectable.
• Operating continuous vibration
: 4.9 m/s2 or less
• Transport and storage shock
: Fall of 60cm max. in packed status
• Indication
: Control output indication of each loop
(mA indication)
9. Power Failure and restart Function
• Permissible duration of momentary power failure
: 20 ms at 90V AC (100 V to 240 V AC
only)
• Indicator
: 21-segment LED
• Indication changeover
: Changeable to each loop by loop selec-
In the case of 24V DC, it is recom-
mended to avoid power failure problem
that system power supply unit with
permissible duration of momentary
power failure of 20ms or more (PXJ, for
example) is used.
tion key
Loop No. indicated by 1-digit LED
• Operation key : Control output up, control output down,
loop selection
• Operation resolution
: 5%
• Behavior at power failure detection
: Control stops at detection of power fail-
ure.
• Backup changeover
: Changeover has been made by the HM
(Hard Manual) switch. However,
changeover cannot be made when the
backup operation unit is faulty.
: In all loops, changeover to the HM
mode is blanceless and bumpless.
• Power recovery mode
: Selectable initial start and continuous
start
4
14. Soft logic function (option)
[Note] The both of soft logic function and WAFER is not
available to operate one time.
13. Communications (option)
13-1 RS485 interface-1
•Communication behavior
: Slave
• Programming method
: Based on IEC 61131-3
• Communication protocol
: Modbus® protocol
available language;
Ladder diagram (LD)
• Physical specification
: EIA RS-485
• Communication method
: Half-duplex, bit serial
: Start-stop synchronizing
• Connection form
: Multi-drop
• Communication speed
Sequential function chart (SFC)
Function block diagram (FBD)
: Programming is to be carried out using
the PC based configuration software.
Programming and editing are not al-
lowed on the controller
: 19.2 kbps
• Number of steps
: 2k steps of ladder
• Communication distance
: Max. 500 m in total
• Computation cycle
: 200 ms / 2k steps of ladder
• Number of connectable units
: Max. 31 units
: Fixed to 8 bits
: Odd / Even / None
: 1 or 2
15. Memory Card Interface (option)
• Specification : Compact Flash® (Based on CFA)
• Compatible memory card
• Data length
• Parity
• Stop bit
: Isolated from internal circuit
: 100 Ω (optional item)
: 5 V flash memory card
Capacity 4, 20 and 32 MB
• Isolation
• Terminator
• Application
• Saving period : 1s to 2h
• Data storage capacity
: Process data logging (32 points or less)
• Communication items
: Parameters and process value.
• RS232C / RS485 signal converter (optional item)
: Code symbol: PDZT0001
Memory card
capacity
Data storge
4MB
about 180 thousand data
about 900 thousand data
about 1.35 million data
13-2 RS485 interface-2
•Communication behavior
: Master
20MB
32MB
: I/O extension
Analog input / output : Max.4
Digital input / output : Max.32
•Usage
[Note] The data of max. 16 points (4 screens)
can be storaged at storage time as 1 s.
:
• Format method
•Communication protocol
: OPTO22 interface
•Physical specification
: EIA RS485
•Communication method
: Half-duplex, bit serial
: Start-stop synchronizing
•Communication speed
: Dependent on this controller
: Readout by PC using PCMCIA card slot
• Data readout
• Recommended memory card
: Made by Sandisk corporation
Sandisk compact Flash memory card is
standardized and on the market.
: 57.6 kbps
•Communication distance
: Max.50m in total
•Number of connectable units
: Max.31 units
[Note] Number of units is limited depend
on the number of I/O points.
: Isolated from internal circuit
: 100 Ω (optional item)
•Isolation
•Terminator
•Communication item
: Parameters, process values,etc.
• Connectable slave unit
: SNAP I/O series (OPTO22 corpora-
tion)
5
PDA3
16. Standards under Conformity
(1) General safety
WAFER name
Linearize
Kinds
Outline
7
Carries out segmented-line
approximation with 15-segmented-
line function.
Time schedule control by step or
polygonal line approximation with
7 segments.
: IEC 1010-1 (1990)
EN 61010-1 (1993)
Program control
4
(2) EMC
: Emission EN 50081-2 (1994)
Immunity EN 50082-2 (1995)
Flip-flop
Pulse width integration
1
1
RS flip-flop.
Adds the change of input at each
basic cycle to the previous
integration value.
17. Configuration Software
17-1 Programming loader software
(code symbol : PDZP2001)
Selector
1
Compares two input values,and
provides High output(Large one),
Low output(Small one),and result
of judgement on large/small.
Selects input or output via a switch
function.Analog hold circuit also
provided.
Outputs on-delay,off-delay timer
signal via start of input signal
according to timer setting.
Carries out absolute value processing
on input and outputs the result.Also
judges the sign(Positive,negative)of
input value and outputs the result.
This software is installed on the CD-ROM form instruction
manual (PDZQ2001) supplied with the main unit.
Communication cable (PDZL1001) is optionally available.
• WAFER connection can be entered, edited, uploaded and
downloaded.
Changeover
Timer
1
1
1
• Operation parameter can be entered, edited, uploaded
and downloaded.
Absolute value/sign
inversion
17-2 Soft logic configurator (optional item)
(code symbol : ZOZ C-KDS-WD2A)
*
•Programming method
Square root extraction
Lead,lag
1
3
Extracts square root of input value
and outputs the result.Low input
cutoff function equipped.
: Based on IEC 61131-3
[Note] The program made by this software cannot be
changed by the controller function key.
Carries out lead/lag operation on the
input and outputs the results.
Used as analog filter function and
for various compensations.
Limits the input within the range of
high/low limit settings,and outputs
the result.Also outputs high/low
limit alarm signal.
Outputs signal which changes...in
ramp from toward target value at
the set full scale time.There are two
of these wafers...in minute unit and
hour unit.
17-3 Recommended personal computer system
• Hardware
: DOS/V machine, Pentium™ 100MHz or
higher
Free hard disk capacity 40MB or more,
memory capacity 32MB or more
Limiter
1
2
Ramp function
• Operating system
: Windows 98 SE/2000/XP English ver-
sion
Analog averaging
Analog integration
1
1
Carries out sequential integration on
input data,calculates the average
value at each averaging time,
and otuputs the result.
Integrates the value obtained by
multiplying the input data by
a proportional constant,and outputs
the result.
Outputs a pulse at the set time
interval.
Adds dead band compensation to
the input and outputs the result.
Detects rise of pulse and counts the
number of pulses.
Integrates the input signal and
converts it to number of pulses
for output.
Decodes 2-bit pure binary input and
outputs it to 4 terminals.
Calculates ranning average of input
data and outputs the result.
Holds the input value according to
sample signal(0/1)and continues
the output.
Usable for dead time compensation
control etc.Data sampling can be
done in 1 sec or 1 min units.
Outputs ON-OFF signal with
hysteresis.
17-4 Cable (code symbol : PDZL1001)
Using the configuration software, the configuration file is
downloaded via RS232C transmission cable.
Table 1
Pulse generation
Dead band
1
1
1
1
List of WAFERS
WAFER name
Kinds
Outline
Primary PID
9
Carries out computation on the
primary loop.
Pulse No.counter
Pulse No.output
Secondary PID
Gain schedule
5
2
Carries out computation on the
secondary loop.
Outputs the PID parameter
corresponding to input 1 according
to the gain schedule table.
Outputs digital data as word data to
an external expansion I/O.
Slices the digital data acquired as
word data from an external
expansion I/O into each bit.
Encodes an input signal into
a binary code.
Decoder
1
2
1
Bit concatevate
Bit slicing
8
1
Running average
Sample & hold
Encoder
1
1
Dead time
6
Sawtooth wave generator
Generates a sawtooth wave with
a slope entered for each
cycle time.
ON-OFF
1
1
1
8
BCD
5
6
Converts BCD data into binary data
and binary data into BCD data.
Carries out AND, OR, NOT, XOR
and a combination of these logical
operations.
Alarm
Compares the input and set value
and outputs the judgment result.
Performs output processing in time
proportional PID control.
Indicate input data on the front
display (using 3 bar-graph display)
Logical operation
Palse width modurator
Indicator
Arithmetic operation
8
1
Carries out a combination of
addition, subtraction, multiplication
and division.
Carries out temperature and
pressure compensation through use
of differential pressure, compensated
pressure, proper temperature.
A variety of applications are possible through combination of WAFERS.
Temperature/pressure
compensation
6
Table 2
SCOPE OF DELIVERY
List of Thermocouple and Resistance Bulb Measurable
range
Controller, panel mounting bracket, instruction manual
(depend on code symbols)
Input signal
Input type code Input range code Measurable range˚C
Thermocouple
J
01
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
00
01
02
03
04
05
06
07
0.0~400.0
0.0~800.0
0.0~400.0
0.0~800.0
0.0~1200.0
0.0~1600.0
0.0~1800.0
Optional Items
J
Available
Item
Type
Specification
K
unit
Terminator
for communication (100 Ω)
PDZR2001
For compression terminal
1
K
K
Shunt resistor (250 Ω)
PDZS2001
For compression terminal
1
1
R
Communication cable for PDZL1001
configuration software
Commonly usable cable
for configuration software
(3m length)
B
T
-
200.0
~
200.0
400.0
Communication cable (Note1)
For compression terminal, PDZK4xx1
from PDA to PDA
T
-
150.0~
With compression
terminal at both ends
1
1
1
1
1
E
0.0~800.0
200.0 800.0
E
-
~
For compression terminal, PDZK5xx1
from PDA to PLC
With M3.5 solderless
terminal on PLC side
S
0.0~1600.0
0.0~1300.0
For compression terminal, PDZK6xx1
from PDA to PC
9-pin connector on PC side
N
U
-200.0~400.0
Communication converter PDZT0001
RS232C / RS485
signal converter
WRe5-26
PL2
0.0~2300.0
0.0~1300.0
0.0~150.0
0.0~300.0
0.0~500.0
0.0~600.0
-50.0~100.0
Compact Controller M
(CC-M) Instruction Manual
in book form (in English)
PDZX5001
PDZX4001
PDZQ2001
Instruction manual in
book form
Resistance bulb Pt100
00
Compact Controller M
(CC-M) Introductory Guide
in book form (in English)
Instruction manual in
book form
1
1
1
Instruction Manual on
CD-ROM (in English)
(Note2)
Instruction manual on
CD-ROM
-
100.0
200.0~600.0
200.0~850.0
~200.0
Mounting bracket (Note3) PDZA1001
Improved mounting
bracket
-
-
(Note 1) These cables are used for Modbus
Length needs to be specified.
.
(Note 2) The instruction manual, introductory guide and programming loader
software (PDZP2001) are included.
(Note 3) This is the improved mounting bracket adopted from PDA-2.
Refer to the outline diagram for shape and dimensions.
Block diagram of electrical isolation
Solid line shows
isolation from the
other units or circuits.
Power
supply
Power supply
unit
DI1 to DI10
DI / DO
unit
Ground
PV1
DO1 to DO10
Ground
TC or RTD
input unit
AI1 to AI6
AI / AO
unit
MI1 to MI14
AO1 to AO4
RS485 (OPTO22)
TC or RTD
input unit
PV2
RS485
(Modbus)
Communication unit
7
PDA3
CODE SYMBOLS
1 2 3 4 5 6 7 8
P D A 1 -
9 10111213 1415
-
Description
Controller function <4th digit code>
Programmable type
3
Note 1
Note 2
Number of control loops <5th digit code>
1 loop (1 control output)
2 loops (2 control outputs)
1
2
4
4 loops (4 control outputs)
External terminal <6th digit code>
Compression terminal
2
Input signal <7th digit code>
1 to 5 V DC
Thermocouple
A
C
D
Note 3
Note 4
Note 4
Resistance bulb Pt100
Power supply voltage <9th digit code>
A
B
100V to 240V AC (Usable range 85V to 264V AC) 50 / 60Hz
24V DC (Usable range 20 to 30V DC)
Operation mode <10th digit code>
C
Cascade-Auto-Manual changeable type
Backup operation unit <11th digit code>
Without
Y
A
B
C
D
E
F
For 1 control output, 100 to 240 V AC
For 2 control outputs, 100 to 240 V AC
For 4 control outputs, 100 to 240 V AC
For 1 control output, 24 V DC
For 2 control outputs, 24 V DC
For 4 control outputs, 24 V DC
Communicatioin / Memory card interface <12th digit code>
(Slave)
Without
Without
RS485
RS485
RS485
RS485
(Master)
Without
Without
Without
RS485
(memory card interface) Note5 Note6
Without
With
Y
M
C
D
U
R
Without
Without
With
Note7
Note7
Note7
Note7
Without
RS485
With
Instruction manual <13th digit code>
Without
Y
D
Instruction manual on CD-ROM (in Japanese and English) Note11
Programming method <14th digit code>
WAFER connection method
Soft logic method
1
2
Note 8
Factory configuration<15th digit code>
Without WAFER connection
With up to 48 WAFER connection
With more than 49 WAFER connection
0
8
9
Note 9
Note10
Note10
Note 1) Control and computation function could be done by WAFER connection or soft logic function.
Note 2) Control loop means the number of control output.
Note 3) For current input, a shunt resistor is used for conversion into voltage.
Shunt resistor is optional item.
Note 4) Thermocouple and resistance bulb input are opitons.
Allowable up to 2 points.
Note 5) Communication cable and terminator are optional items.
Note 6) Recommended maker: Sandisk corporation.
Note 7) Slave interface is Modbus protocol and master interface is OPTO22 interface
Note 8) Programming method conforming with IEC61131-3.
.
Optional items Soft logic configurator is necessary for programming.
The both of Soft logic function and WAFER is not available to operate one time.
Note 9) In this case, WAFER connection programming should be made by user.
Connection tool (Programming loader) is optional item.
When set "2" on the 14th digit code, "0" should be set on the 15th digit code.
Note 10) WAFER connection specification sheets need to be prepared and submitted by user to Fuji.
Input signal and measurable range initial set before delibvery is as follows.
For specification of voltage input, scale is 0.00 to 100.00%
For specification of thermocouple, K, 0.0 to 400.0˚C.
For specification of resistance bulb is 0.0 to 150.0˚C.
Note 11) Programming Loader (PDZP2001) is included in the CD-ROM.
Communication cable (PDZL1001) is optionally available.
This instruction manual is recorded in PDF format file. To read this manual,
Adobe Acrobat Reader is required. Setup program of Acrobat Reader is also
recorded on this CD-ROM.
8
FUNCTIONAL DIAGRAM
RS485 (Modbus
)
PC /
PLC
Communication
Control and computation
(option)
WAFER region
Loop 4
Loop 3
Loop 2
Loop 1
max.4
loops
Control output
Analog input
Memory
card
(option)
Compression
terminal
Thermocople /
Resistance bulb
(option)
1st
PID
Analog
output
2nd
PID
Digital
input
Digital
output
or
Soft logic function
(Based on IEC 61131-3)
Communication
(option)
PC
RS485 (OPTO22
)
interface
OPTO22
SNAP I/O
Configuration software
Back up operation unit
(option)
9
PDA3
OUTLINE DIAGRAM (Unit : mm)
Terminal cover
Panel thickness 8 mm or less
Cover bracket
Panel
72
21.6
280
Mounting bracket
Note) The distance between other instruments and low end of PDA shall be more than 100mm.
10
MOUNTING BRACKET
50
205
PANEL CUTOUT DIMENSIONS
For mounting
one unit
For mounting
multiple “n” units
Number of
n
2
n ; Q'TY
+1
0
+0.7
0
(72.2n-4)
68
11
PDA3
EXTERNAL CONNECTION DIAGRAM
Manipulated
output
Manipulated
1
2
3
4
5
6
7
8
AI1
SC
AI2
AI3
SC
AI4
AI5
SC
AI6
SC
VP
PC
DI9
DI10
DO9
DO10
22
23
24
25
26
27
28
29
30
MI+2
MI-2
MI+3
MI-3
MI+4
MI-4
DO6
DO7
DO8
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
MI+1
MI-1
AO1
SC
AO2
AO3
SC
2
output
1
Manipulated
output
3
Voltage
input
Voltage
output
Manipulated
output
4
AO4
FLT
9
10
11
12
13
14
15
16
31 DIO-COM
32
33
DO1
DO2
DO3
DO4
DO5
DI1
PCD
VPD
(+)
(-)
DI6
DI7
24 V external
supply
34 DIO-COM
RS-485
35
36
37
38
39
40
41
42
DI8
OPT+
OPT-
COM
I+2
Io2
Rcj-2
I-2
communication
(Opto22)
downloading
(+)
(-)
RS-485
commun-
ication
58 DIO-COM
59
60
(COM)
(+)
PCD
17 MOD+
18 MOD-
19
20
21
DI2
DI3
(Modbus)
uploading
(+)
(-)
(+)
Process
value
Rcj
(-)
COM
VPD
PCD
61 DIO-COM
(COM)
PCD
input 2
62
63
64
65
66
67
DI4
DI5
I+1
Io1
Rcj-1
I-1
VPD
(+)
24 V
supply
for
(-)
(+)
Process
Voltage Thermo- Resistance
value
input 1
DIO
Rcj
(-)
input
couple
input
bulb
input
(-)
Voltage Thermo-
Resistance
bulb
input
input
couple
input
G
N/- L/+
Instrument power supply 100 to 240VAC
Grounding
Instrument power supply 24VDC
[Note] Windows is the registered trade mark of Microsoft corporation.
[Note] Modbus is the registered trade mark of Gould Modicon.
[Note] Compact Flash is the registered trade mark of Sandisk corporation.
[Note] OPTO22 interface and SNAP I/O is the registered trade mark of OPTO22(USA).
[Note] Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
Caution on Safety
*Before using this product, be sure to read its instruction manual in advance.
Head Office
6-17, Sanbancho, Chiyoda-ku, Tokyo 102-0075, Japan
http://www.fesys.co.jp/eng
Sales Div.
International Sales Dept.
No.1, Fuji-machi, Hino-city, Tokyo, 191-8502 Japan
Phone: 81-42-585-6201, 6202 Fax: 81-42-585-6187
http: //www.fic-net.jp/eng
Printed in Japan
Information in this catalog is subject to change without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明